openPR Logo
Press release

seamless and welded pipe

11-17-2021 11:19 AM CET | Industry, Real Estate & Construction

Press release from: Nansteel Manufacturing Co.,Ltd

Seamless steel pipe is a round, square and rectangular steel with a hollow section and no joints on the periphery. Seamless steel pipes are made of steel ingots or solid tube billets through perforation into capillary tubes, and then made by hot rolling, cold rolling or cold drawing.

Welded steel pipes refer to steel pipes with seams on the surface that are welded after bending and deforming steel strips or steel plates into round or square shapes.

A53 erw steel pipe

So, what is the difference between seamless and welded pipe?

1. Different materials

①Welded steel pipe: Welded steel pipe refers to steel pipes with seams on the surface after bending and deforming steel strips or steel plates into round or square shapes. The blanks used for welded steel pipes are steel plates or strip steels.

②Seamless steel pipe: a steel pipe made from a single piece of metal with no seams on the surface.

2. Different categories
① Welded steel pipe: According to different welding methods, it can be divided into arc welded pipe, high frequency or low frequency resistance welded pipe, gas welded pipe, furnace welded pipe, Bondi pipe, etc. According to the purpose, it is divided into general welded pipe, galvanized welded pipe, oxygen-blowing welded pipe, wire casing, metric welded pipe, roller pipe, deep well pump pipe, automobile pipe, transformer pipe, electric welded thin-walled pipe, electric welded special-shaped pipe and spiral welded pipe.

②Seamless steel pipes: seamless pipes are divided into hot-rolled pipes, cold-rolled pipes, cold-drawn pipes, extruded pipes, and top pipes. According to the cross-sectional shape, seamless steel pipes are divided into two types: round and special-shaped. Special-shaped pipes have square, elliptical, triangular, hexagonal, melon-shaped, star-shaped, and finned pipes. The maximum diameter is 650mm, and the minimum diameter is 0.3mm. According to different purposes, there are thick-walled pipes and thin-walled pipes.

3. Different uses
① Welded steel pipes: can be used as water gas pipes, etc., large diameter longitudinally welded pipes are used for high pressure oil and gas transportation, etc.; spiral welded pipes are used for oil and gas transportation, pipe piles, bridge piers, etc.

②Seamless steel pipes: used as petroleum geological drilling pipes, cracking pipes for petrochemical industry, boiler pipes, bearing pipes, and high-precision structural steel pipes for automobiles, tractors, and aviation.

Know more,pleases refer to:
https://www.nan-steel.com/news/seamless-and-welded-pipe.html

Xueshi Rd, Yuelu Technology Industrial Park, Changsha,China

Nansteel Manufacturing Co.,Ltd, today an ISO - 9001:2008, certified Company. are a prominent Manufacturer, Stockist and Exporter of carbon steel pipe, stainless steel pipe, structural section, fittings and OCTG in various materials including Stainless Steel, Carbon Steel, Alloy Steel. in standard size and as per our customers’ requirements and drawings. Products from Nansteel are used widely in Nuclear Power Plants, Thermal Power Stations, Atomic Power Plants, Oil & Gas, Petrochemical, Fertilizers, and Chemicals & Pharmaceuticals.Together with the know-how which technical power and the many years and spontaneity service, we supply the product of good quality with economies of scale to the customer. Moreover, it had become the company compared is equipping the best role of competitive power improvement with the customer. We grew as the novelty one enterprise grows the partner relationship which goes out it pursues to be strong, continuity. Nansteel is a growth-oriented company, providing exceptional quality and service with competitive pricing on all of our products. We take pride in our employees, products and service, all of which have contributed to years of growth. This philosophy has earned us a solid reputation for excellence within our industry.

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release seamless and welded pipe here

News-ID: 2465115 • Views:

More Releases from Nansteel Manufacturing Co.,Ltd

ERW pipe standard
ERW pipe standard
Electric Resistance Welded (ERW) pipes are a widely used type of steel pipe known for their versatility, cost-effectiveness, and applicability across various industries. In this comprehensive guide, we will explore the characteristics, manufacturing processes, standards, and applications of ERW pipes, shedding light on their significance in construction, infrastructure, oil and gas, and other sectors. 1.Introduction to ERW Pipes ERW pipes are steel pipes manufactured through the process of electric resistance welding, which
How to control the welding of spiral welded pipe?
How to control the welding of spiral welded pipe?
Welded steel pipe (steel pipe manufactured with a weld) is a tubular product made out of flat plates, known as skelp, that are formed, bent and prepared for welding. Pipe molding can only follow two specific techniques that result in either seamless and welded pipe. Crude raw material such as ore or metal cast into ingots is the first step. The last step of the fabrication process is to shape the
cs seamless pipe extrusion process
cs seamless pipe extrusion process
Structural and cs seamless pipe are both extruded. That means a billet of material is forced through a hole in a die shaped to form the two-dimensional cross-section. Extrusion of seamless tubes Extrusion method refers to the metal blank into the extruder barrel, extrusion molding and extrusion rod composed of "closed" container by applying pressure to force the metal extruded rod extrusion die orifice outflow from, and access to metal plastic molding

All 4 Releases


More Releases for Seamless

Carbon steel seamless tube vs Stainless steel seamless tube
The difference between carbon steel seamless tube and stainless steel seamless tube mainly refers to the difference in design rules between carbon steel and stainless steel, which means that the design rules of these two types of steel cannot be used in common. These differences are summarized as follows: Carbon steel 1. Ordinary steel is carbon steel, that is, iron-carbon alloy. According to the level of carbon content, it is divided into
Seamless steel tube hardness testing
The hardness test is to slowly press a hard indenter into the surface of the sample under specified conditions, and then test the depth or size of the indentation to determine the hardness of the material. Hardness test is a simple, rapid and easy-to-implement method in material mechanical property test. The hardness test is non-destructive, and there is an approximate conversion relationship between the material hardness value and the tensile
Anti-corrosion technical requirements for seamless pipes
Seamless steel pipe (SMLS) is the most widely used pipe material at present. Generally, it needs anti-corrosion treatment when it is used for chemical pipelines, oil pipelines, natural gas pipelines, water pipelines and other projects. The common anti-corrosion processes of seamless steel pipes mainly include 3PE anti-corrosion, Epoxy coal tar anticorrosion, epoxy resin anticorrosion, IPN8710 anticorrosion, cement mortar anticorrosion technology, etc. 1. Why is seamless steel pipe anti-corrosion? Seamless steel pipe is
cs seamless pipe extrusion process
Structural and cs seamless pipe are both extruded. That means a billet of material is forced through a hole in a die shaped to form the two-dimensional cross-section. Extrusion of seamless tubes Extrusion method refers to the metal blank into the extruder barrel, extrusion molding and extrusion rod composed of "closed" container by applying pressure to force the metal extruded rod extrusion die orifice outflow from, and access to metal plastic molding
Seamless Pipes Market 2025: Top Key Players Michigan Seamless Tube, LLC., Tenari …
Market Definition and Introduction Seamless pipes are a type of pipe with round, hollow cross sections without seams. Generally, they are a wrought steel tubular product manufactured without a welded seam. They are conventionally manufactured using a hot forming process through either extrusion or drawing. This is generally followed by cold sizing and molding the pipe into a desired shape and proportion and giving it desirable properties. Seamless pipes are generally
KDPOF Enables Seamless Optical Networks Integration
Plastic Optical Fiber Gains Ground for Gigabit Ethernet Connectivity in Vehicles KDPOF – leading supplier for automotive gigabit transceivers over POF (Plastic Optical Fiber) – is delighted to present a complete POF solution to be seamlessly integrated into the wire harness of the vehicle. At the International Congress Automotive Wire Harness on March 13 and 14, 2018 in Ludwigsburg, Germany, KDPOF will display innovative gigabit POF solutions in partnership with leading