openPR Logo
Press release

MOST150 Controller for Multivalent Applications

11-29-2012 10:45 PM CET | Industry, Real Estate & Construction

Press release from: GOEPEL electronics Ltd.

basic MOST 6161

basic MOST 6161

Introducing basic MOST 6161, GOEPEL electronic has extended the range of communication solutions for MOST150. The new stand-alone module can be integrated in test environments for electronic control units (ECUs) via either USB or Ethernet interface. Both host interfaces are provided in parallel.

basic MOST 6161 can execute bus master and slave functions within a MOST ring configuration. Furthermore, a so called Spy Mode is provided in which basic MOST 6161 does not simulate active bus participants but records the data traffic on the MOST bus. Control, package and streaming channels are supported in MOST transmission.

In addition to the MOST150 interface, the module provides numerous test resources, such as two communication interfaces to be configured as CAN, LIN or K-Line. They allow for execution of Gateway or Routing functions, e.g. the transfer of the speed signal from CAN to MOST for speed-independent volume control. According to specification, the Electrical Control Line (ECL) represents an additional line to the MOST bus, designed for status requests or ring break detection. Further supported are the signals SPDIF IN/OUT for audio streaming via synchronous and isochronous channels as well as a DVI interface for connecting an external monitor.

An optional breakout box can be provided to make the module more robust for lab utilization with frequently changing connectors. The breakout box provides the mentioned signals to connectors with respective mechanical wear resistance.

In terms of software, users are supported by a convenient user interface (GOEPEL-API), facilitating the module integration in individual hardware and software projects. User access to the INIC command set is possible without additional net services. An extensive macro library with configurable single test steps is provided for users of GOEPEL electronic’s test sequencer software “Program Generator”.

GOEPEL electronic is a worldwide leading vendor of professional JTAG/Boundary Scan solutions and technology innovator of IP based instrumentation. With more than 100 product launches the company became the biggest innovator in the market within the last five years. A network of branch offices, distributors and service partners ensures the global availability of the products as well as the support of the more than 7,000 system installations.
Founded 1991 and headquartered in Jena, Germany, GOEPEL electronic employs currently about 200 employees. GOEPEL electronic has continuously been ISO9001 certified since 1996 and has been honoured with TOP-JOB and TOP-100 awards for being one of the best medium-sized companies in Germany. GOEPEL electronic’s products won several awards in recent years and are used by the leading companies in telecommunication, automotive, space and avionics, industrial controls, medical technology, and other industries.
Further information about the company and its products can be found on the internet at www.goepel.com.

GOEPEL electronics Ltd.
Unit 1A
The Old Granary
Westwick, Cambridge
CB24 3AR/UK

Phone +44-1223-858298
Fax +44-1223-257800
www.goepel.co.uk

Stefan Meissner
press@goepel.com

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release MOST150 Controller for Multivalent Applications here

News-ID: 244708 • Views:

More Releases from GOEPEL electronics Ltd.

G-TAP – versatile Contacting Solution for Assembly Test
G-TAP – versatile Contacting Solution for Assembly Test
GOEPEL electronic introduces G-TAP, a worldwide unique solution for the versatile contacting of electronic assemblies - in particular the JTAG bus - for testing and programming. The G-TAP is not a single product but an overall concept, because the module can be utilized in stand-alone operations as well as an integrated solution in existing electronic and optical test systems such as Flying Probers, In-Circuit Test or AOI systems. http://www.goepel.com/en/news/newsdetails/article/2012/11/15/g-tap-versatile-contacting-solution-for-assembly-test-from-goepel-electronic.html “In the development
GOEPEL electronic demonstrates first ChipVORX Prototype Instruments for Bit Error Rate Tests
GOEPEL electronic demonstrates first ChipVORX Prototype Instruments for Bit Erro …
At the International Test Conference (ITC) GOEPEL electronic introduces the first ChipVORX® model prototype to execute Bit Error Rate Tests (BERT) using on-board Field Programmable Gate Arrays (FPGA). http://www.goepel.com/en/news/newsdetails/article/2012/11/08/goepel-electronic-demonstrates-first-chipvorx-prototype-instruments-for-bit-error-rate-tests.html The new solution enables the utilisation of FPGA Embedded Instruments in the form of special softcores for the test and design validation of high-speed I/O. This will allow users to evaluate the quality of interconnections by way of bit error rates and also
New Inline Programming System combined with Embedded Test
New Inline Programming System combined with Embedded Test
GOEPEL electronic announced the market introduction of additional RAPIDO™ series inline production systems for high-speed programming as well as board test based on the newest Embedded System Access (ESA) technologies. http://www.goepel.com/en/news/newsdetails/article/2012/11/13/new-inline-programming-system-combined-with-embedded-test.html The new models named RPS3000-(x) support double-sided probing for up to 3000 nails. Non-volatile memories such as Flash, Microcontrollers (MCU) and Programmable Logic Devices (PLD) can be on-board programmed even faster and more reliably. Based on an enhanced SCANFLEX® architecture with
Parallel Inline AOI for THT Components and THT Solder Joints in one System
Parallel Inline AOI for THT Components and THT Solder Joints in one System
GOEPEL electronic presents the world debut for the automatic inspection of THT assemblies: the multi awarded OptiCon THT-Line AOI system now provides a parallel inspection of THT components and THT solder joints. In a typical THT production line, now it is possible to inspect mounted components before the soldering processes as well as PCB solder joints during the return transport. http://www.goepel.com/en/news/newsdetails/article/2012/11/13/parallel-inline-aoi-for-tht-components-and-tht-solder-joints-in-one-system.html This gain in effectiveness for users is enabled by the OptiCon

All 5 Releases


More Releases for MOST150

MTCM for MOST150 Coax Physical Layer Testing
RUETZ SYSTEM SOLUTIONS Introduces MOST Tester Cable Model as New Extension for Physical Layer Stress Test Tool RUETZ SYSTEM SOLUTIONS – experts in automotive data communications – now also provide coaxial physical layer testing for MOST150. The recently developed MOST Tester Cable Model "MTCM" is an extension of the well-proven Physical Layer Stress Test Tool "PhLSTT". "Our new MTCM meets the additional challenges and demands for physical layer testing that
MOST150 Implementation in the All-new Volvo XC90
The MOST® Cooperation - standardization organization for the leading automotive multimedia network technology Media Oriented Systems Transport (MOST) - is pleased to announce that Volvo has integrated MOST150 into its brand new vehicle model Volvo XC90. "Proceeding on its path of success, MOSTCO celebrates the growing acceptance of the automotive network standard, now with the implementation by key carmaker Volvo," stated Henry Muyshondt, Administrator of the MOST Cooperation. "With Volvo,
First MOST150 Implementation in Asia
Hyundai Motor Implements MOST150 in the All-New Genesis The MOST® Cooperation - standardization organization for the leading automotive multimedia network technology Media Oriented Systems Transport (MOST) - is delighted to announce that Hyundai Motor Company will use MOST150 in its all-new Genesis model. MOST150, which is featured in a handful of other premium brand vehicles, will provide a high level of connectivity and comfort to the driver and passengers. This system
PXI 6161 - new Communication Controller for MOST150
GOEPEL electronic provides PXI 6161, an all-new communication controller supporting MOST150 based on the highly powerful Series 61. Using this new hardware platform, users are able to individually and flexibly configure the controller according to their individual needs. That means, GOEPEL electronic provides one-stop solutions in software and hardware supporting MOST150. Using PowerPC architecture, the host PC is relieved and valuable bandwidth for additional application is obtained, enabling complex and CPU-intensive
MOST150 Broadens In-car Multimedia
MOST(r) Technology Forwards High-definition Audio and Video into Vehicles Karlsruhe (Germany) - The MOST Cooperation is pleased about the milestones the latest MOST Technology has accomplished: MOST150 now offers the technology and full audio/video capability for next generation automotive infotainment features and devices such as Head Units, Rear Seat Entertainment, amplifiers, TV-tuners and video displays. Based on the technology specification by the organization, through which the leading automotive multimedia network Media
MOST150 Now Allows Safety Critical Applications
Driver Assist Applications to Be Included in MOST Network Karlsruhe (Germany) March 23, 2010 - The MOST Cooperation welcomes the latest research results proving that MOST150 is ready to support safety-critical applications and may be available as the future network for driver assistance systems. By supporting the new domain of driver assist, the latest MOST Technology completes the major fields of in-car uses such as entertainment, information, mobile connectivity, and connected