openPR Logo
Press release

GOEPEL electronics strengthens Sales Forces in the UK and Ireland

10-10-2012 07:12 PM CET | Industry, Real Estate & Construction

Press release from: GOEPEL electronics Ltd.

New Sales Specialists

New Sales Specialists

Meeting the challenges of the demanding UK market, GOEPEL electronics Ltd. has added three new sales specialists for the company’s product ranges of JTAG/Boundary Scan equipment as well as Automated Optical Inspection (AOI), Automated X-ray Inspection (AXI) and Solder Paste Inspection (SPI) systems.

Boundary Scan Sales Specialist Andrew Pitt replaces Karl Miles, in the GOEPEL electronics Ltd. UK’s Cambridge based team, taking care of developing test solutions based on the companies JTAG/Boundary Scan software and hardware.

Andrew has worked in the embedded systems and development arena for over 30 years, with experience in systems ranging from inertial navigation guidance systems to image reconstruction systems for medical imaging systems.

“I am excited to return to my roots in board testing where I believe the advanced capabilities of the new GOEPEL electronic Embedded System Access tools will provide the answers to our customers most difficult test requirements, helping them to deliver higher reliability product into their markets”, Andrew says.

Technical Sales Engineer Daniel Robertson is responsible for sales of AOI/ AXI/SPI systems, addressing a hugely challenging electronics production market in the British and Irish isles. Daniel gained more than 25 years experience within the electronics industry, both on the production floor and within technical sales. He has come from DNA Automation Ltd, who sold both new and used capital equipment, primarily in rework, and pick and place.

Daniel adds: “I’m optimistic making my contribution to GOEPEL electronics’ success by bringing technical sales, plus considerable experience gained over 25 years at the sharp end, dealing directly with clients production issues and failure analysis to rectify and improve both production yield and quality.”

The third new face is Samantha Law, who was hired earlier this summer to strengthen the internal sales team as well as taking care about customer service and support inquiries.

Samantha’s experienced in building Customer relationships and sourcing new business.

GOEPEL electronic is a worldwide leading vendor of professional JTAG/Boundary Scan solutions and technology innovator of IP based instrumentation. With more than 100 product launches the company became the biggest innovator in the market within the last five years. A network of branch offices, distributors and service partners ensures the global availability of the products as well as the support of the more than 7,000 system installations. Founded 1991 and headquartered in Jena, Germany, GOEPEL electronic employs currently about 200 employees and generated a revenue of more than 25 Million Euro in 2011 (ca. $33Mio). GOEPEL electronic has continuously been ISO9001 certified since 1996 and has been honoured with TOP-JOB and TOP-100 awards for being one of the best medium-sized companies in Germany. GOEPEL electronic’s products won several awards in recent years and are used by the leading companies in telecommunication, automotive, space and avionics, industrial controls, medical technology, and other industries. Further information about the company and its products can be found on the internet at www.goepel.com.

GOEPEL electronics Ltd.
Unit 1A
The Old Granary
Westwick, Cambridge
CB24 3AR/UK

Phone +44-1223-858298
Fax +44-1223-257800
www.goepel.co.uk

Stefan Meissner
press@goepel.com

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release GOEPEL electronics strengthens Sales Forces in the UK and Ireland here

News-ID: 238491 • Views:

More Releases from GOEPEL electronics Ltd.

G-TAP – versatile Contacting Solution for Assembly Test
G-TAP – versatile Contacting Solution for Assembly Test
GOEPEL electronic introduces G-TAP, a worldwide unique solution for the versatile contacting of electronic assemblies - in particular the JTAG bus - for testing and programming. The G-TAP is not a single product but an overall concept, because the module can be utilized in stand-alone operations as well as an integrated solution in existing electronic and optical test systems such as Flying Probers, In-Circuit Test or AOI systems. http://www.goepel.com/en/news/newsdetails/article/2012/11/15/g-tap-versatile-contacting-solution-for-assembly-test-from-goepel-electronic.html “In the development
GOEPEL electronic demonstrates first ChipVORX Prototype Instruments for Bit Error Rate Tests
GOEPEL electronic demonstrates first ChipVORX Prototype Instruments for Bit Erro …
At the International Test Conference (ITC) GOEPEL electronic introduces the first ChipVORX® model prototype to execute Bit Error Rate Tests (BERT) using on-board Field Programmable Gate Arrays (FPGA). http://www.goepel.com/en/news/newsdetails/article/2012/11/08/goepel-electronic-demonstrates-first-chipvorx-prototype-instruments-for-bit-error-rate-tests.html The new solution enables the utilisation of FPGA Embedded Instruments in the form of special softcores for the test and design validation of high-speed I/O. This will allow users to evaluate the quality of interconnections by way of bit error rates and also
New Inline Programming System combined with Embedded Test
New Inline Programming System combined with Embedded Test
GOEPEL electronic announced the market introduction of additional RAPIDO™ series inline production systems for high-speed programming as well as board test based on the newest Embedded System Access (ESA) technologies. http://www.goepel.com/en/news/newsdetails/article/2012/11/13/new-inline-programming-system-combined-with-embedded-test.html The new models named RPS3000-(x) support double-sided probing for up to 3000 nails. Non-volatile memories such as Flash, Microcontrollers (MCU) and Programmable Logic Devices (PLD) can be on-board programmed even faster and more reliably. Based on an enhanced SCANFLEX® architecture with
Parallel Inline AOI for THT Components and THT Solder Joints in one System
Parallel Inline AOI for THT Components and THT Solder Joints in one System
GOEPEL electronic presents the world debut for the automatic inspection of THT assemblies: the multi awarded OptiCon THT-Line AOI system now provides a parallel inspection of THT components and THT solder joints. In a typical THT production line, now it is possible to inspect mounted components before the soldering processes as well as PCB solder joints during the return transport. http://www.goepel.com/en/news/newsdetails/article/2012/11/13/parallel-inline-aoi-for-tht-components-and-tht-solder-joints-in-one-system.html This gain in effectiveness for users is enabled by the OptiCon

All 5 Releases


More Releases for Sales

Biochips Market Sales Volume, Sales Price, Sales Revenue Analysis
The global biochips market was valued at US$ 7,026.4 million in 2016 and is expected to witness a robust CAGR of 16.2% over the forecast period (2017 – 2025). Biochips are miniaturized laboratories, which can perform simultaneous biochemical reactions. On the basis of functionality, biochips are classified as DNA chips, protein chips, lab-on-a-chips, and tissue and cell arrays. DNA chips, biochips or DNA microarrays consists of a microscope slide made of
Shock Wave Therapy Devices Market Sales Volume, Sales Price, Sales Revenue Analy …
Shock wave therapy also called extracorporeal shock wave therapy (ESWT) is a non-invasive treatment that is used in wide areas of medical field that includes physical therapy, orthopedics, cardiology, and urology. Shock wave therapy is an alternative treatment for orthopedic surgeries. The term extracorporeal signifies the external shock generation, and the resultant shock waves are then transmitted to the internal parts of the body via intermediate pads through the skin.
Insulin Pumps Market Sales Volume, Sales Price, Sales Revenue Analysis
Insulin pump is a portable device attached to the body that continuously delivers preset amounts of short or rapid acting insulin in the body to control diabetes. Insulin therapy is required in type 1 diabetes and sometime in type 2 diabetes. It serves as an effective alternative to insulin injections. Furthermore, insulin pump delivers the insulin according to the need of body as basal rate, where small amount of insulin
Automobile Upholstery Market 2018 Sales Volume, Sales Price, Sales Revenue Analy …
Global Automobile Upholstery Market report provides key information about the industry, including invaluable facts and figures, expert opinions, and the latest developments across the globe. The Report also calculate the market size, the report considers the revenue generated from the sales of This Report and technologies by various application segments. This report studies Automobile Upholstery in Global market, especially in North America, China, Europe, Southeast Asia, Japan and India, with
Automotive Windscreen Sales Market – Analysis of Automotive Windscreen Sales G …
Automotive Windscreen Market report provides an in detail study of Manufactures in the market which is based on the various objectives associated with an organization such as Analysis, Market Share, Regional Market Performance, Product Specification, and the Company Introduction. The latest market intelligence study on Automotive Windscreen Sales market relies on statistics derived from the application of both primary and secondary research to present insights pertaining to the operational model, opportunities
Epoxy Hardener Sales with Epoxy Hardener sales volume
In this report, the global Epoxy Hardener market is valued at USD XX million in 2016 and is expected to reach USD XX million by the end of 2022, growing at a CAGR of XX% between 2016 and 2022. Geographically, this report split global into several key Regions, with sales (K MT), revenue (Million USD), market share and growth rate of Epoxy Hardener for these regions, from 2012 to 2022 (forecast),