New Vice President for Jenoptik’s Lasers Business Unit in North America
Stephen Hypsh has more than 15 years of experience and excellent knowledge of the laser sector, mainly in the USA and North America. Before he began working for Jenoptik, he held various executive positions in the industry. Most recently, he used to be responsible for the business development at Raydiance – a manufacturer of femtosecond lasers. Moreover, one of his previous positions was that of a Sales Manager at Trumpf Lasers in North America.
With Jenoptik, Stephen Hypsh joins one of the leading international technology companies which has experience in the laser industry for about 20 years. Jenoptik is one of the very few suppliers in the world mass-producing the entire technology chain within the field of laser sources – from semiconductor material and diode lasers up to solid-state lasers – ensuring high quality and process reliability.
The company sells its laser products and solutions at the American market as well. Jenoptik lasers are recognized there as being particularly reliable, efficient and powerful, and are used for various applications, mainly in the fields of industry and medical technology. In this context, Jenoptik relies on innovative and trendsetting lasers such as high-power diode lasers, disk lasers and fiber lasers.
The semiconductor material made by Jenoptik exhibits an excellent beam quality and a power of up to 160 watts cw or 300 watts qcw per laser bar. In cw operation mode a life time of up to 30,000 hours is reached.
Jenoptik’s high-power diode lasers have a high efficiency of up to 70 percent and a very small volume at the same time. They predominantly used as a pumping source for solid-state lasers and fiber lasers and as a direct beam source in medical technology and material processing.
The JenLas® D2.x laser series has a long success story. Those are green diode-pumped disk lasers mainly used in medical technology. More than 14,000 of those well-proven products have already
been delivered to destinations all over the world for applications in ophthalmology, dermatology and esthetics – most of them intended for the American and German market. At the beginning of this year, Jenoptik has introduced the further development of the JenLas® D2.x technology – the new JenLas® D2.mini 5/8W. The major advantages of this laser are its performance, optimized beam quality and more compact design.
In order to satisfy the demand for the efficient OEM fiber lasers, Jenoptik has also introduced the high-brightness single-mode high-power fiber laser system JenLas® fiber cw 1000 this year. It is characterized by high performance stability and a long life time of the laser source at a power of 1,000 watts. In this way, constantly high productivity can be achieved in metal cutting and metal welding.
About the Jenoptik Lasers & Material Processing division
In the Lasers & Material Processing division we have control of the entire value-added chain of laser material processing and it is one of the leading providers – from component through to complete system. In the area of lasers, Jenoptik has specialized in high-quality semiconductor materials and reliable diode lasers as well as innovative solid-state lasers, for example disk and fiber lasers. In the area of high-power diode lasers, Jenoptik is acknowledged worldwide as a leader in quality for high-power diode lasers. These laser sources are used, among other things, in the areas of laser material processing, medical technology and show & entertainment. In the area of laser processing systems Jenoptik develops laser systems and machines that are integrated into production facilities for our customers as part of their process optimization and automation. These systems are used to work with plastics, metals, glass and thin-film solar cells with maximum efficiency, precision and safety.
Manager Marketing & Communications
Lasers & Material Processing division
JENOPTIK l Lasers & Material Processing
JENOPTIK Laser GmbH
Goeschwitzer Str. 29
07745 Jena I Germany
Phone +49 3641 65-4300
Fax +49 3641 65-4011
email@example.com I www.jenoptik.com/lm
This release was published on openPR.
Permanent link to this press release:
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release New Vice President for Jenoptik’s Lasers Business Unit in North America here
News-ID: 233252 • Views: 1122
More Releases from JENOPTIK I Lasers & Material Processing
Jenoptik with New Products at LASYS.
From June 24-26, Jenoptik’s Lasers & Material Processing division is to present the latest product developments for industrial laser-based material processing at the LASYS trade fair in Stuttgart. Jenoptik will be present in hall 4 at the LASYS even twice: Trade visitors will be able to catch up on the products of Jenoptik’s Lasers & Material Processing division both at Jenoptik stand no. B71 and at stand no. E11.1 in the
Jenoptik introduces new products at Photonics West 2013.
On February 5-7, 2013, Jenoptik will be presenting new products and advanced technologies in the fields of optics, lasers and infrared technology in San Francisco. Furthermore, the Group is the main sponsor of the SPIE Startup Challenge 2013 to support young entrepreneurs. In the field of laser material processing, Jenoptik will present the femtosecond laser JenLas® D2.fs with improved parameters. Maintaining stable beam quality, the output power and pulse repetition
New Head of Sales in the Jenoptik’s Business Unit Lasers
Since mid-November 2012, Michael Fichtner is the new Head of Sales in the Lasers business unit of the Jenoptik’s Lasers & Material Processing division. In addition to his degree in engineering, Michael Fichtner has gained an MBA degree within the scope of additional studies. He has many years of experience in the fields of sales and product management as well as excellent knowledge of the optoelectronic industry. Prior to joining Jenoptik, he
Start of industrial series application by clients: Jenoptik supplies high power …
The first consignments of the new Jenoptik fiber lasers have been delivered. They went to an Asian client where they will be used for high-speed metal cutting. Further high power fiber lasers will be delivered till the end of this year. The lasers had previously passed a comprehensive and demanding series of application tests with flying colors. The fiber laser which Jenoptik also successfully showcased at the EuroBLECH 2012 trade fair
More Releases for Laser
Medical Laser Systems Market
LASER stands for light amplification by stimulated emission of radiations. It possesses properties such as high monochromaticity, coherence and directionality which attributes to its strong penetration power. Lasers are widely used as a tool in surgery and diagnosis. Some of the major product types encompassing the medical laser systems market are diode lasers, solid state lasers, gas lasers and dye lasers. This position is majorly attributed to their use in an
Global Laser Cutting Machines Market - Lead Laser, Golden Laser, Boye Laser, Kai …
Global Laser Cutting Machines Market Report 2017 provides detailed analysis of Laser Cutting Machines market, enclosing detailed study of Laser Cutting Machines market for last few years and forecast up to year 2022. The Laser Cutting Machines market report analyses the global Laser Cutting Machines market from different angles to understand various factors impacting the global Laser Cutting Machines market. The reports enlightens the user with various applications, product type, end
Laser Market Analysis 2017-2022 (Fiber Laser, CO2 Laser, Solid State Laser)
The 2017-2022 Top Manufacturers Laser Market Report presents a comprehensive study of the Laser in global market, especially in the North America, Europe, Asia-Pacific, South America, Middle East and Africa. The study scans the progression of the market trailed over the past few years and the forecasts of growth in the coming years, primarily in terms of sales. The research report highlights the reasons liable for the disparities in the
Global Industrial Laser Market
Industrial Laser Market: Overview In recent years the industrial laser market has been developing steadily. The industrial lasers are used in industry in a wide variety of applications. These applications can involve processing of materials and all other applications. The material processing includes cutting, welding, drilling, etc. these type of implementation generally requires high power lasers. The adoption of laser processing is increasing in industries as it can be easily automated
30 years Z-LASER
Since Z-LASER’s founding in 1985, the company has been an innovative manufacturer of intelligent laser technologies. Since its inception, applications in the fields of metrology, industrial machine vision, positioning, and medical technology have been developed. Z-LASER’s products are exclusively developed and manufactured in Freiburg, Germany and serve as illumination for high-quality 2D and 3D camera based applications as well as a visual positioning aid in various industries. Besides high performance
Z-LASER: New laser supplier STEMMER IMAGING
Freiburg, Germany. The industrial laser illuminations from German manufacturer Z-LASER are now available from STEMMER IMAGING in The Netherlands, Belgium and Luxembourg. STEMMER IMAGING and Z-LASER have signed an agreement for the distribution of Z-LASER´s industrial laser illuminations over the STEMMER IMAGING Benelux offices. The innovative Z-LASER products have been available from the 1st February 2014 from Europe’s largest imaging technology provider, for customers in The Netherlands, Belgium and Luxembourg. STEMMER IMAGING’s