openPR Logo
Press release

New Test System for Electro and Servo Motors

11-26-2011 09:07 AM CET | Industry, Real Estate & Construction

Press release from: GOEPEL electronics Ltd.



GOEPEL electronic continues to extend its range of functional test systems with the introduction of CARMEN, a test system specifically developed for the verification of mechanic characteristics of electro mechanical and servo motors.

The CARMEN’s modular architecture enables specific orientations due to changing units under test (UUTs). Hence, CARMEN can be well adjusted and extended, suiting perfectly for fast setup and reconstruction of test sections for various applications.

In the test run, the entire characteristic curve between idling and full rotary speed up to the block can be passed through to determine parameters such as efficiency, structure-borne noise, performance and power consumption. A considerable array of test methods, e.g. thermal, overload or starting behaviour, self-inhibition, ripple determination, characteristic curve and resistance reproduction are already integrated in the system. Optionally, CARMEN can be extended to include an acoustic test. Depending on customer requirements additional tests can be implemented.

The motor test system CARMEN was designed according to customer wishes referring to various DC motors. The effort in adjusting the system to different motor types can be minimised by a consistent mechanic interface. When retooling to new UUT types, the software supports users in setting and classifying the mechanic system. The software’s modular structure helps to significantly save time in programming according to implementing test requirements.

In addition to deterministic control methods and possible applications of dynamic loads, the modular and easily extendable software concept allows the decentralised and simple integration of additional resources. For example, motors can be tested due to the Hardware-in-the Loop (HIL) principle.

About GOEPEL electronic:
GOEPEL electronic is a vendor of intelligent Automotive Test Solutions – from bus communication up to functional test systems for vehicle control units. The company headquartered in Jena/Germany was founded in 1991 and has approximately 180 employees. GOEPEL electronic runs service and support offices in the USA, UK, France and China, and ensures the local and on-site availability of its products via an extended international distribution network.
GOEPEL electronic has continuously been ISO9001 certified since 1996 and has been honoured with TOP-JOB and TOP-100 awards for being one of the best medium-sized companies in Germany. GOEPEL electronic’s products won several awards in recent years and are used by the leading companies in telecommunication, automotive, space and avionics, industrial controls, medical technology, and other industries.
More information about the company and its Automotive Test Solutions can be found on the internet at

GOEPEL electronics Ltd.
Unit 1A
The Old Granary
Westwick, Cambridge

Phone +44-1223-858298
Fax +44-1223-257800

Stefan Meissner

This release was published on openPR.

Permanent link to this press release:

Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release New Test System for Electro and Servo Motors here

News-ID: 202151 • Views:

More Releases from GOEPEL electronics Ltd.

G-TAP – versatile Contacting Solution for Assembly Test
G-TAP – versatile Contacting Solution for Assembly Test
GOEPEL electronic introduces G-TAP, a worldwide unique solution for the versatile contacting of electronic assemblies - in particular the JTAG bus - for testing and programming. The G-TAP is not a single product but an overall concept, because the module can be utilized in stand-alone operations as well as an integrated solution in existing electronic and optical test systems such as Flying Probers, In-Circuit Test or AOI systems. “In the development
GOEPEL electronic demonstrates first ChipVORX Prototype Instruments for Bit Error Rate Tests
GOEPEL electronic demonstrates first ChipVORX Prototype Instruments for Bit Erro …
At the International Test Conference (ITC) GOEPEL electronic introduces the first ChipVORX® model prototype to execute Bit Error Rate Tests (BERT) using on-board Field Programmable Gate Arrays (FPGA). The new solution enables the utilisation of FPGA Embedded Instruments in the form of special softcores for the test and design validation of high-speed I/O. This will allow users to evaluate the quality of interconnections by way of bit error rates and also
New Inline Programming System combined with Embedded Test
New Inline Programming System combined with Embedded Test
GOEPEL electronic announced the market introduction of additional RAPIDO™ series inline production systems for high-speed programming as well as board test based on the newest Embedded System Access (ESA) technologies. The new models named RPS3000-(x) support double-sided probing for up to 3000 nails. Non-volatile memories such as Flash, Microcontrollers (MCU) and Programmable Logic Devices (PLD) can be on-board programmed even faster and more reliably. Based on an enhanced SCANFLEX® architecture with
Parallel Inline AOI for THT Components and THT Solder Joints in one System
Parallel Inline AOI for THT Components and THT Solder Joints in one System
GOEPEL electronic presents the world debut for the automatic inspection of THT assemblies: the multi awarded OptiCon THT-Line AOI system now provides a parallel inspection of THT components and THT solder joints. In a typical THT production line, now it is possible to inspect mounted components before the soldering processes as well as PCB solder joints during the return transport. This gain in effectiveness for users is enabled by the OptiCon

All 5 Releases

More Releases for CARMEN

Global IQF Blueberry Market Data Breakdown by Key Players 2020-2027: ROYAL RIDGE …
IQF Blueberry Market The report gives the detailed overview of Global IQF Blueberry Market 2020 and predicts future market trends throughout 2027. It focuses deeply on satisfactory solutions to user in terms of value and volume forecast 2020-2027. Also the report executes the great study of Price and Gross Margin, Capacity, Production, Revenue, current geographical zones, technology, demand-supply, Consumption, Import, Export, Market Drivers and Opportunities around the world. In this Professional
THE CARMEN PORCO STORY: From Scum-lord to Champion of the Poor
For Immediate Release Contact: Charles Taylor 608-206-9056 Madison, WI-A new book: The-Carmen-Porco-Story-Journey-Toward-Justice has just been released. This insightful biography, provides a “compelling and beautifully written account of Rev. Carmen Porco’s life journey from the barroom where he grew up, to his highly successful low-income housing ministry.” When he arrived in Madison, former Mayor Paul Soglin called Carmen the biggest “scum-lord” in the city because the low income properties he came to manage-Packer and
Global IQF Blueberry Market 2018 - ROYAL RIDGE FRUITS, Del Carmen Fruits, Royal …
Apex Market Reports, recently published a detailed market research study focused on the “IQF Blueberry Market” across the global, regional and country level. The report provides 360° analysis of “IQF Blueberry Market” from view of manufacturers, regions, product types and end industries. The research report analyses and provides the historical data along with current performance of the global PP Pipe industry, and estimates the future trend of IQF Blueberry on
Riviera Maya Jazz Festival 2011 – One More Reason for investing in Playa Del C …
It’s October and high season for tourism is on. The weather is great and exciting times are in the offing. Many cultural events like Riviera Maya Jazz Festival, Taste of Playa or the new Wine Festival will be taking place over next few months which will give tourists a sample of the great quality of life to be had here in Playa del Carmen. Playa Del Carmen is not just a
Playa Breeze Property Rentals Enable Spring Break 2011 Travelers to Experience P …
PLAYA DEL CARMEN, MEXICO: From late February through early April, Spring Break travelers flood the beaches of Florida and Mexico; most notably, Cancún, Miami Beach, and South Beach. Playa del Carmen, Mexico is located on the southern coast of Mexico on the Caribbean Sea. Originally a small fishing town, Playa del Carmen has become a wonderful Spring Break alternative to the crowds found in Cancún and southern Florida.
Carmen Christensen Headed to Fashion Week NYC
Carmen Christensen of Time2Design is 1 of 20 elite designers, architects and writers selected by Brizo, the fashion forward faucet brand, to attend an exclusive, all-expense paid three-day design-focused Fashion Week event in New York City. At the event Carmen will meet the Brizo design team and be given the opportunity to preview new kitchen and bath products that are about to launch as well as being asked to