openPR Logo
Press release

Safe inline X-Ray Inspection of double-sided equipped BGA Components

07-21-2011 08:11 AM CET | Industry, Real Estate & Construction

Press release from: GOEPEL electronics Ltd.

3D x-ray inspection system OptiCon X-Line 3D

3D x-ray inspection system OptiCon X-Line 3D

GOEPEL electronic’s 3D x-ray inspection system OptiCon X-Line 3D enables a safe quality control of solder joints on opposed mounted BGA components, e.g. in double-sided equipped DDR-RAM modules. In the inline production process, single-sided and double-sided equipped PCBs can be inspected within one test run.

After image capturing from different directions and succeeding reconstruction, OptiCon X-Line 3D provides the opportunity to analyse both the top and bottom sides of the boards and all layers in between layer by layer.

Initially, each BGA solder ball is localised in x/y-direction as well as z-direction. Subsequently, relevant parameters of each solder joint are determined in three layers. By comparing these measured values open solder joints and wetting defects can de safely detected. Additionally, voids can be determined in size and their z-position within a solder joint. Naturally, the system is able to detect solder connections at IC pins and 2-pin components as well as THT components.

The OptiCon X-Line 3D is unrivalled worldwide by utilising the revolutionary GigaPixel image technology. A real-time multi angle image recording is the basis that enables a test speed of 40cm²/s for full 3D PCB capturing. Integrated reconstruction methods, based on digital tomosynthesis, allows defined evaluation of the board’s single layers.

About GOEPEL electronic:
GOEPEL electronic is a worldwide leading vendor of professional electronic and optical test and inspection systems. Founded 1991 and headquartered in Jena, Germany, GOEPEL electronic employs currently about 180 employees and generated a revenue of more than 22 Million Euro in 2010 (ca. $31 Mio). GOEPEL electronic has continuously been ISO9001 certified since 1996 and has been honoured with TOP-JOB and TOP-100 awards for being one of the best medium-sized companies in Germany. GOEPEL electronic’s products won several awards in recent years and are used by the leading companies in telecommunication, automotive, space and avionics, industrial controls, medical technology, and other industries. Further information about the company and its products can be found on the internet at www.goepel.com.

GOEPEL electronics Ltd.
Unit 1A
The Old Granary
Westwick, Cambridge
CB24 3AR/UK

Phone +44-1223-858298
Fax +44-1223-257800
www.goepel.co.uk

Stefan Meissner
press@goepel.com

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Safe inline X-Ray Inspection of double-sided equipped BGA Components here

News-ID: 184196 • Views:

More Releases from GOEPEL electronics Ltd.

G-TAP – versatile Contacting Solution for Assembly Test
G-TAP – versatile Contacting Solution for Assembly Test
GOEPEL electronic introduces G-TAP, a worldwide unique solution for the versatile contacting of electronic assemblies - in particular the JTAG bus - for testing and programming. The G-TAP is not a single product but an overall concept, because the module can be utilized in stand-alone operations as well as an integrated solution in existing electronic and optical test systems such as Flying Probers, In-Circuit Test or AOI systems. http://www.goepel.com/en/news/newsdetails/article/2012/11/15/g-tap-versatile-contacting-solution-for-assembly-test-from-goepel-electronic.html “In the development
GOEPEL electronic demonstrates first ChipVORX Prototype Instruments for Bit Error Rate Tests
GOEPEL electronic demonstrates first ChipVORX Prototype Instruments for Bit Erro …
At the International Test Conference (ITC) GOEPEL electronic introduces the first ChipVORX® model prototype to execute Bit Error Rate Tests (BERT) using on-board Field Programmable Gate Arrays (FPGA). http://www.goepel.com/en/news/newsdetails/article/2012/11/08/goepel-electronic-demonstrates-first-chipvorx-prototype-instruments-for-bit-error-rate-tests.html The new solution enables the utilisation of FPGA Embedded Instruments in the form of special softcores for the test and design validation of high-speed I/O. This will allow users to evaluate the quality of interconnections by way of bit error rates and also
New Inline Programming System combined with Embedded Test
New Inline Programming System combined with Embedded Test
GOEPEL electronic announced the market introduction of additional RAPIDO™ series inline production systems for high-speed programming as well as board test based on the newest Embedded System Access (ESA) technologies. http://www.goepel.com/en/news/newsdetails/article/2012/11/13/new-inline-programming-system-combined-with-embedded-test.html The new models named RPS3000-(x) support double-sided probing for up to 3000 nails. Non-volatile memories such as Flash, Microcontrollers (MCU) and Programmable Logic Devices (PLD) can be on-board programmed even faster and more reliably. Based on an enhanced SCANFLEX® architecture with
Parallel Inline AOI for THT Components and THT Solder Joints in one System
Parallel Inline AOI for THT Components and THT Solder Joints in one System
GOEPEL electronic presents the world debut for the automatic inspection of THT assemblies: the multi awarded OptiCon THT-Line AOI system now provides a parallel inspection of THT components and THT solder joints. In a typical THT production line, now it is possible to inspect mounted components before the soldering processes as well as PCB solder joints during the return transport. http://www.goepel.com/en/news/newsdetails/article/2012/11/13/parallel-inline-aoi-for-tht-components-and-tht-solder-joints-in-one-system.html This gain in effectiveness for users is enabled by the OptiCon

All 5 Releases


More Releases for OptiCon

Liquid Crystal Lense Market 2017- Varioptic, Edmund Optics, Optilux, Opticon, Op …
Apex Research, recently published a detailed market research study focused on the "Liquid Crystal Lense Market" across the global, regional and country level. The report provides 360° analysis of "Liquid Crystal Lense Market" from view of manufacturers, regions, product types and end industries. The research report analyses and provides the historical data along with current performance of the global Liquid Crystal Lense industry, and estimates the future trend of Liquid
Electrowetting Liquid Lense Market 2017- Varioptic, Optilux, Opticon, Optotune
Apex Research, recently published a detailed market research study focused on the "Electrowetting Liquid Lense Market" across the global, regional and country level. The report provides 360° analysis of "Electrowetting Liquid Lense Market" from view of manufacturers, regions, product types and end industries. The research report analyses and provides the historical data along with current performance of the global Electrowetting Liquid Lense industry, and estimates the future trend of Electrowetting
Laser Profile Scanners Market Share 2017 Datalogic ADC, Nikon Engineering, Olymp …
Laser Profile Scanners Market Research A market study ” Global Condenser Microphones Market ” examines the performance of the Laser Profile Scanners market Size 2017. It encloses an in-depth Research of the Laser Profile Scanners market state and the competitive landscape globally. This report analyzes the potential of Laser Profile Scanners market in the present and the future prospects from various angles in detail. The Global Laser Profile Scanners Market 2017 report
3D Digitizers Market Forecasts 2017 Datalogic ADC, Nikon Engineering, Olympus, O …
3D Digitizers Market Research A market study ” Global Condenser Microphones Market ” examines the performance of the 3D Digitizers market Size 2017. It encloses an in-depth Research of the 3D Digitizers market state and the competitive landscape globally. This report analyzes the potential of 3D Digitizers market in the present and the future prospects from various angles in detail. The Global 3D Digitizers Market 2017 report includes 3D Digitizers market Size,
Global Data Collectors Market 2017 : IBM, Cargill, LUDECA, CONTEC, OPTICON
A market study based on the "Data Collectors Market" across the globe, recently added to the repository of Market Research, is titled ‘Global Data Collectors Market 2017’. The research report analyses the historical as well as present performance of the worldwide Data Collectors industry, and makes predictions on the future status of Data Collectors market on the basis of this analysis. Ask Sample of Data Collectors Report Here : http://bit.ly/2sA2gV3 Dominant players
Global Data Collectors Market 2017 : IBM, Cargill, LUDECA, CONTEC, OPTICON
A market study based on the "Data Collectors Market" across the globe, recently added to the repository of Market Research, is titled ‘Global Data Collectors Market 2017’. The research report analyses the historical as well as present performance of the worldwide Data Collectors industry, and makes predictions on the future status of Data Collectors market on the basis of this analysis. Ask Sample of Data Collectors Report Here : http://bit.ly/2sA2gV3 Dominant players