openPR Logo
Press release

New WEDA 10 cubic metres CCM Dosificator

07-07-2011 09:13 AM CET | Industry, Real Estate & Construction

Press release from: WEDA Dammann & Westerkamp GmbH

/ PR Agency: PRSchulz
New WEDA 10 cubic metres CCM Dosificator

New WEDA 10 cubic metres CCM Dosificator

The round dosificator for dry and wet pigs‘ feed components of WEDA Dammann & Westerkamp is now additionally available in two spacious variations of six and ten cubic metres of intermediate storage capacity.

Since the early eighties, WEDA of Lutten have been the only providers and producers for intermediate storage containers of glass fibre reinforced plastic (GFK) for CCM and wet grain. These properties make GFK an ideally suited material. The containers are cost-effective, stable, light-weight, and the material remains undamaged when in contact with corrosive materials.

Based on this experience, the new dosificators have undergone an improvement: for both sizes there is now a GFK cover available which is operated by an electrical lifting mechanism. The lid protects against rain water and contaminations with impurities like for example hygienically critical bird droppings. The constructors have added special insert panels to the large 10-cubic metre model for even greater stability.

All previous dimensions were kept as they were. Stable construction components like the proven motor were also taken over by the Lower Saxons. A double sword of hardened steel with a diameter of 1.65 m is operated inside the WEDA round dosificator which reduces the feed to small pieces and then doses it out. This way, the dosing-out volume is clearly higher when compared with single swords. Due to the special steel the sword has a longer life span even under heavy use.

Additional advantages of the WEDA round dosificator:
- discharge extruder with a diameter of 200 mm of high grade steel
- pipe worm conveyors with a diameter of 200 mm of high grade steel
- The product touching parts are made of high grade steel or of GFK
- The drive is in a rain-protected position underneath the dosificator.

For more than 70 years, WEDA’s name stands for innovation and reliability. Originally founded as an enterprise for the manufacture of wood gas generators, Dammann & Westerkamp GmbH (WEDA) have meanwhile become global market leaders in the domain of liquid feeding with more than 130 members of staff at their headquarters at Lutten. The WEDA company owns locations in almost 50 countries on all continents.

In their function as full providers in the field of modern pig managements, WEDA – besides the domains of feeding technology and house equipment – also attend upon the segments of ventilation technology and liquid manure treatment. WEDA possess more than two dozens of patents.

In 1996 – as the first enterprise of the branch – WEDA received the certification according to the international quality standards, DIN EN ISO 9000 ff. In 2001, the companies of WEDA and of Erich Stallkamp ESTA GmbH founded the WELTEC BIOPOWER GmbH enterprise.

WEDA Dammann & Westerkamp GmbH
Carsten Bergstedt
Head of Marketing
Am Bahnhof 10
49424 Lutten
Phone: +49 4441.8705.65
Email: c.bergstedt@weda.de

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release New WEDA 10 cubic metres CCM Dosificator here

News-ID: 182509 • Views: 1695

More Releases from WEDA Dammann & Westerkamp GmbH

The Downpipe Cleaning for Liquid Feeding Systems
WEDA-EUROTIER-NOVELTY No. 3 Feeding Technology: „WACS“ Isn’t almost every pig farmer familiar with the laborious and time-consuming cleaning of downpipes in liquid feeding systems, e.g, by means of a rinsing device? From now on, the new computer controlled WACS of WEDA makes dirty downpipes a thing of the past. WEDA’s new development, the WACS (Weda Active Cleaning System) ensures automatic cleaning of the downpipes in liquid feeding units by means of an air
Fermentation Almost by Itself
WEDA-EUROTIER NOVELTY No. 2 Feeding Technology: „WEDA Fermi 4PX“ Until now, liquid feeding units with fermentation have been able to control the fer- mentation process, however, not without additional manual adaptations on behalf of the unit operators. WEDA have developed a fermentation software, which takes off a large part of this work for the user and consequently saves a lot of time and effort. For an optimal fermentation, the
Instrument Panel in the Pig House
WEDA-EUROTIER NOVELTY No. 1 Management: „Dashboard for Excellent 4PX“ WEDA have developed a software solution, which offers all relevant data of the feeding computer at a glance. Thereby, the user is already at a very early stage in a position to detect if problems within his animal stock are beginning to emerge, and can intervene directly. Until now, within the frame of his daily, time-consuming routine procedure, the user of a
Liqui Comp Forever
35 Years of WEDA’s Liqui Comp Feeding Computer In 1979, WEDA Dammann & Westerkamp put Liqui Comp on the market. The feeding computer has been successfully used by pig farmers to this day. These pig farmers are still extremely satisfied with the product, which allows them to manage their animals without restrictions with regard to operator convenience. One of the reasons for customer satisfaction to this day is the

All 5 Releases


More Releases for CCM

Global Halal Pharmaceuticals Market 2019 - CCM Pharmaceuticals, Pharmaniaga, Ros …
This new report by Eon Market Research, titled “Global Halal Pharmaceuticals Market 2019 Research Report, 2015 – 2025” offers a comprehensive analysis of Halal Pharmaceuticals industry at a global as well as regional and country level. Key facts analyzed in this report include the Halal Pharmaceuticals market size by players, regions, product types and end industries, history data 2014-2018 and forecast data 2019-2025. This report primarily focuses on the study
Global Hydroxycarbamide Market 2018 - CCM Hockey, Graf, Roces
Apex Market Reports, recently published a detailed market research study focused on the “Hydroxycarbamide Market” across the global, regional and country level. The report provides 360° analysis of “Hydroxycarbamide Market” from view of manufacturers, regions, product types and end industries. The research report analyses and provides the historical data along with current performance of the global PP Pipe industry, and estimates the future trend of Hydroxycarbamide on the basis of
CD-adapco announces STAR-CCM+ Video Competition
Based on the success of our annual post-processing calendar competition, CD-adapco is pleased to announce another chance to win a 16Gb Apple iPad! In this new competition, we are looking for the best example of a simulation video, created using STAR-CCM+ (although you are free to use video editing software to add polish to your entry). Competitors need to first post their simulation video clips on YouTube and then post the
CONIGMA™ CCM receives renewed SAP® certification “Powered by SAP NetWeaver …
Seamless integration of the current version 3.5 of CONIGMA CCM with SAP NetWeaver platform results in new certification by SAP. Munich, 30th of July, 2010 - Galileo Tools GmbH, one of the leading suppliers of software solutions for SAP change-, release- and transport-management today announces that its Conigma CCM suite version 3.50 has been certified in July 2010 by SAP for “Powered by SAP NetWeaver”. Conigma CCM is a standard
Galileo Tools announces Conigma™ CCM Version 3.5
Conigma™ CCM version 3.5 offers significantly enhanced features and new functionalities for managing and automating the SAP change und transport processes. Munich, April 7, 2010 - Galileo Tools GmbH, one of the leading suppliers of software solutions for SAP® change, release and transport management announces that Conigma CCM is now available in the latest version 3.5. The new version contains significant improvements in nearly all areas of documenting, controlling and
CCM becomes an Apple Training Center for Education
California College of Music is now authorized by Apple Inc. as an Apple Training Center for Education. This authorization recognizes CCM as an established institution to teach Apple Pro applications, such as, Final Cut Pro, Logic Pro, and Soundtrack Pro to those seeking to become Apple Pro Certified. Educational institutions can only become Apple Pro authorized through a certified instructor. CCM’s audio engineering and music production instructor,