openPR Logo
Press release

New Vishay Polymer Tantalum Chip Capacitors Distributed Through New Yorker Electronics

06-17-2019 12:37 PM CET | IT, New Media & Software

Press release from: New Yorker Electronics

NORTHVALE, New Jersey, USA – New Yorker Electronics has announced the release of the extended Vishay Polytech T55 series of vPolyTan surface-mount polymer tantalum molded chip capacitors. The new devices in the D case (EIA 7343-31) size features single-digit ESR values from 9mΩ down to 7mΩ, with values to 6mΩ in development.

Previously reserved for larger case sizes, the devices’ single-digit ESR values of are 3mΩ to 5mΩ lower than those typically found in D case devices. This results in reduced voltage drops, better frequency response and higher ripple current ratings. These tantalum capacitors also reduce the number of capacitors required on the PCB, and with the D case’s low 3.1mm profile, they enable the design of thinner end products.

This series gets better frequency response and higher ripple current ratings up to 5.67A IRMS. They provide low internal resistance for enhanced charge and discharge characteristics.

The extended versions now boasts a capacitance range of 3.3μF to 1000μF, a voltage rating of 2.5VDC to 63VDC and a tolerance of ±20%. Compatible with “high volume” automatic pick and place equipment, the T55 Series is ideal for such applications as power management, battery decoupling and energy storage in computers, servers, network infrastructure equipment, solid state drives and wireless transceivers.

Case sizes range from 1.6mm x 0.8mm x 0.8mm up to 7.3mm 4.3mm x 2.8mm. Depending on the case size, it has a maximum permissible power dissipation of between 0.05W and 0.225W at ≤ +45°C in free air.

Features & Benefits:

• Ultra low ESR
• 100% surge current tested
• Accelerated voltage conditioning
• High ripple current capability
• Stable capacitance in operating temperature range
• Better capacitance stability vs. frequency
• No wear out effect
• Molded case available in 8 case codes
• Terminations:
- Cases J, P: 100% tin
- Case A: 100% tin or Ni / Pd / Au
- Cases T, B, Z, V, D: Ni / Pd / Au
• Compatible with “high volume” automatic pick and place equipment
• Moisture sensitivity level 3

Applications:
• Decoupling, smoothing, filtering
• Bulk energy storage in wireless cards
• Infrastructure equipment
• Storage and networking
• Computer motherboards
• Smartphones and tablets

New Yorker Electronics is a franchise distributor for Vishay Technology and supplies its full line of Semiconductors and Passive Components. As a franchise distributor for Vishay Polytech, New Yorker Electronics supplies its molded tantalum chip capacitors with manganese dioxide cathode, molded tantalum chip capacitors with polymer cathode, and niobium capacitors.

209 Industrial Parkway, Northvale, New Jersey 07647 United States of America
marketing@newyorkerelectronics.com

New Yorker Electronics is a certified authorized distributor of electronic components, well known for its full product lines, large inventories and competitive pricing since 1948. New Yorker Electronics is an AS9120B and ISO 9001:2015 certified source of capacitors, resistors, semi-conductors, connectors, filters, inductors and more, and operates entirely at heightened military and aerospace performance levels. It also functions in strict accordance with AS5553 and AS6496 standards — verifying that it has implemented industry standards into everyday practices to thwart the proliferation of counterfeit parts. It is a member of ECIA (Electronics Component Industry Association) and of ERAI (Electronic Resellers Association International).

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release New Vishay Polymer Tantalum Chip Capacitors Distributed Through New Yorker Electronics here

News-ID: 1776418 • Views:

More Releases from New Yorker Electronics

New Cornell Dubilier 1,000-Hour X2 Class Interference Suppression Capacitors Meet Demanding 85/85 THB Test
New Cornell Dubilier 1,000-Hour X2 Class Interference Suppression Capacitors Mee …
NORTHVALE, New Jersey, USA - New Yorker Electronics has announced the release of the new MXT Metallized Polypropylene Film Capacitor Series from Cornell Dubilier, a division of Knowles Corporation. Designed to suppress conducted electromagnetic/radio frequency interference (EMI/RFI) at a circuit's power input the MXT Series is perfect for use in harsh environments having met the demanding 85/85 THB (Temperature, Humidity, Bias) test requirements. Class X2 capacitors, like the MXT, are
Electrocube Capacitor Series Offers Rugged Alternative to Electrolytic Capacitors
Electrocube Capacitor Series Offers Rugged Alternative to Electrolytic Capacitor …
NORTHVALE, New Jersey, USA - New Yorker Electronics has announced Electrocube's release of the new 985B Series of Double Metallized Polypropylene Film Capacitors, designed for use in high-powered inverter applications. Able to handle high surge currents without degrading, Electrocube's 985B is a rugged, non-inductively wound double metallized high-current capacitor. The 985B series is part of Electrocube's designated line of capacitors specially designed and optimized for high temperature, high current applications subject
Vishay Intertechnology High-Temperature IHSR Inductor Delivers Current Ratings to 155A
Vishay Intertechnology High-Temperature IHSR Inductor Delivers Current Ratings t …
NORTHVALE, New Jersey, USA - New Yorker Electronics has announced Vishay's release of the first AEC-Q200 qualified IHSR high temperature inductor with current ratings to 155A in the 6767 case size (19.0mm by 17.1mm by 7.0mm). Designed for multi-phase, high current power supplies and input / output filters in automotive under the hood and ADAS applications, the Vishay Dale IHSR-6767GZ-5A offers a 50-percent reduction in DCR over typical power inductors
New Yorker Electronics announces CDE's release of the New Screw Terminal Capacitors with Extended Cathode Construction
New Yorker Electronics announces CDE's release of the New Screw Terminal Capacit …
NORTHVALE, New Jersey, USA - New Yorker Electronics has announced the release of the new Cornell Dubilier Electronics (CDE) DCMC Series of Aluminum Electrolytic Capacitors. With more capacitance and often more ripple-current capability than its best-value Type 3186 capacitor, the DCMC is the better choice for high-capacitance, power supply filters and energy storage applications such as welding equipment, UPS systems and computer hold-up power. Made in the USA, these CDE

All 5 Releases


More Releases for Electronic

Electronic Cigarettes
Electronic Cigarettes are also known as Vaping, which consist of different type of devices that allow the users to inhale an aerosol that might be nicotine, flavoring and other species. Electronic Cigarettes market is expected to mark significant growth over forecasted period owing to increasing technological advancements, change in lifestyle and consists of various flavours and fragrance. There has been significant rise in number of prevalence of adults using e-cigarettes
Electronic Voting Machine Market 2019-2025| Top key players: Gaurang Electronic …
This report titled as Electronic Voting Machine Market gives a brief about the comprehensive research and an outline of its growth in the market globally. Electronic voting is voting that uses electronic means to either aid or take care of casting and counting votes. Depending on the particular implementation, e-voting may use standalone electronic voting machines or computers connected to the Internet. It may encompass a range of Internet services,
Electronic Voting Machine Market 2019-2025| Top key players: Gaurang Electronic …
The Electronic Voting Machine Market requires the prevailing regions in the market during the forecast period. Evidence on the region leading the market are some of the facets that are highlighted under this section of the report. A voting machine is a machine used to register and tabulate votes. The first voting machines were mechanical but it is increasingly more common to use electronic voting machines. Traditionally, a voting machine
Electronic Wrapper Market Segmented By loading types semi-automatic electronic w …
A Revolutionary Product for the Packaging Industry The electronic wrapper has been a revolutionizing product in the packaging industry. Electronic wrappers are easy to maintain and comfortable for size changes. The steel built electronic wrappers enable easy access for maintenance and cleaning, thus, gaining a considerable customer base from the packaging industries mainly for food and consumer products. An electronic wrapper is an automated machine, which is programmed to perform a
Wearable Electronic Devices Market,Wearable Electronic Devices Industry, Global …
Latest industry research report on: Global Wearable Electronic Devices Market : Industry Size, Share, Research, Reviews, Analysis, Strategies, Demand, Growth, Segmentation, Parameters, Forecasts This report studies the global Wearable Electronic Devices market status and forecast, categorizes the global Wearable Electronic Devices market size (value & volume) by manufacturers, type, application, and region. This report focuses on the top manufacturers in United States, Europe, China, Japan, South Korea and Taiwan and other
Electronic Recycling Market - Increasing Consumption of Electronic Devices
In a report published recently, Transparency Market Research (TMR) provides insights into the growth drivers and restraints impacting the global electronic recycling market. The report is titled “Electronic Recycling Market - Global Industry Analysis, Size, Share, Growth, Trends and Forecast 2013 - 2019” and is available on the company website for sale. Based on the findings of the survey conducted, the report pegs the global market for electronic recycling market