openPR Logo
Press release

Vishay Intertechnology High-Temperature IHSR Inductor Delivers Current Ratings to 155A

04-03-2023 10:11 PM CET | Industry, Real Estate & Construction

Press release from: New Yorker Electronics

New Yorker Electronics supplies new Vishay Dale Automotive-Grade IHSR High-Temperature Inductor in IHSR-6767GZ-5A

New Yorker Electronics supplies new Vishay Dale Automotive-Grade IHSR High-Temperature Inductor in IHSR-6767GZ-5A

NORTHVALE, New Jersey, USA - New Yorker Electronics has announced Vishay's release of the first AEC-Q200 qualified IHSR high temperature inductor with current ratings to 155A in the 6767 case size (19.0mm by 17.1mm by 7.0mm). Designed for multi-phase, high current power supplies and input / output filters in automotive under the hood and ADAS applications, the Vishay Dale IHSR-6767GZ-5A offers a 50-percent reduction in DCR over typical power inductors and a smaller size than similar ferrite-based solutions.

The Automotive Grade inductor released today is optimized for energy storage in DC/DC converters up to 5MHz and high current filtering applications. With its high operating temperature up to +155°C, the Vishay IHSR Inductor is also suitable for filtering and DC/DC conversion in ADAS and LIDAR microprocessors, 12V / 48V vacuum-less braking systems, OBCs, and brushless DC electric motors up to 140A. For these applications, Vishay states that the IHSR-6767GZ-5A's low typical DCR of 0.24mΩ and inductance of 0.22µH allow for higher current density than competing technologies, with no hard saturation and more stable inductance and saturation over the entire operating temperature range.

Packaged in a 100-percent lead (Pb)-free shielded, composite construction that reduces buzz noise to ultra low levels, the inductor offers high resistance to thermal shock, moisture, and mechanical shock, and handles high transient current spikes without saturation. The device is RoHS-compliant, halogen-free, and Vishay Green.

Features & Benefits:
• AEC-Q200 qualified
• High temperature rating, up to 155 °C
• Lowest DCR/μH, in this package size
• Shielded construction
• Excellent DC/DC energy storage up to 5 MHz
• Handles high transient current spikes without saturation
• Ultra low buzz noise, due to composite construction

Applications:
• High current load EMI filters (12 V / 140 A or 48 V / 140 A)
• LIDAR boost inductor for laser diode with GaN MOSFETs
• 48 V / 12 V (> 250 kHz; 5 kW) buck-boost inductor for multiphase converters (bi-directional)
• Excellent BLDC LC filter inductor up to 140 A (EPS; super chargers)
• Optimized filter and storage inductor for high ambient temperature applications up to 85 °C with operating 155 °C
• Excellent storage inductor up to 1 MHz switching frequency (low voltage 12 V to 5 V)
• EMI filter for 12 V / 48 V vacuum less braking (BLDC)

New Yorker Electronics supplies Vishay Dale discrete semiconductors (diodes, MOSFETs and infrared optoelectronics) and passive electronic components (resistors, inductors and capacitors).

209 Industrial Parkway, Northvale, New Jersey 07647 USA

Headquartered in Northvale, NJ, New Yorker Electronics, Co., Inc. (www.newyorkerelectronics.com) is a global franchised distributor of electronic components, value-added services, and supply chain solutions to the world's leading OEMs and contract manufacturers in various markets. Founded in 1948, the AS9120B and ISO 9001:2015 certified company has earned a reputation for delivering superior levels of reliability and customer support while providing direct franchise access to an extensive ready-to-ship inventory of passive, inter-connect, electromechanical and Mil-Spec components, as well as semiconductor devices.

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Vishay Intertechnology High-Temperature IHSR Inductor Delivers Current Ratings to 155A here

News-ID: 2998356 • Views:

More Releases from New Yorker Electronics

New Cornell Dubilier 1,000-Hour X2 Class Interference Suppression Capacitors Meet Demanding 85/85 THB Test
New Cornell Dubilier 1,000-Hour X2 Class Interference Suppression Capacitors Mee …
NORTHVALE, New Jersey, USA - New Yorker Electronics has announced the release of the new MXT Metallized Polypropylene Film Capacitor Series from Cornell Dubilier, a division of Knowles Corporation. Designed to suppress conducted electromagnetic/radio frequency interference (EMI/RFI) at a circuit's power input the MXT Series is perfect for use in harsh environments having met the demanding 85/85 THB (Temperature, Humidity, Bias) test requirements. Class X2 capacitors, like the MXT, are
Electrocube Capacitor Series Offers Rugged Alternative to Electrolytic Capacitors
Electrocube Capacitor Series Offers Rugged Alternative to Electrolytic Capacitor …
NORTHVALE, New Jersey, USA - New Yorker Electronics has announced Electrocube's release of the new 985B Series of Double Metallized Polypropylene Film Capacitors, designed for use in high-powered inverter applications. Able to handle high surge currents without degrading, Electrocube's 985B is a rugged, non-inductively wound double metallized high-current capacitor. The 985B series is part of Electrocube's designated line of capacitors specially designed and optimized for high temperature, high current applications subject
New Yorker Electronics announces CDE's release of the New Screw Terminal Capacitors with Extended Cathode Construction
New Yorker Electronics announces CDE's release of the New Screw Terminal Capacit …
NORTHVALE, New Jersey, USA - New Yorker Electronics has announced the release of the new Cornell Dubilier Electronics (CDE) DCMC Series of Aluminum Electrolytic Capacitors. With more capacitance and often more ripple-current capability than its best-value Type 3186 capacitor, the DCMC is the better choice for high-capacitance, power supply filters and energy storage applications such as welding equipment, UPS systems and computer hold-up power. Made in the USA, these CDE
New Yorker Electronics Reveals Promising Option for Hard-To-Get Oscillator Device
New Yorker Electronics Reveals Promising Option for Hard-To-Get Oscillator Devic …
NORTHVALE, New Jersey, USA - New Yorker Electronics, distributor of major component manufacturers since 1948, is delivering a viable option for a product that typically has lead times of up to 50 to 60 weeks. Due to the worldwide IC shortage, the Oscillator lead times are prohibitively long leading to massive production delays. Raltron Electronics, a global leader in high performance frequency management components and antenna products, manufactures programmable oscillators in

All 5 Releases


More Releases for IHSR

High-Temp Inductor from New Yorker Electronics Offers Higher Current Density for …
NORTHVALE, New Jersey, USA – New Yorker Electronics has just released the first device in a new IHSR series of high temperature commercial inductors. Designed for multi-phase, high current power supplies and filters in computer, industrial and telecom applications, the Vishay Dale IHSR-4040DZ-51 offers a 50% reduction in DCR over typical power inductors. It also demonstrates a 20% or greater profile reduction over similar ferrite products. In addition, the inductor