openPR Logo
Press release

GOEPEL electronic combines Boundary Scan with analogue Opens/Shorts Tests

04-14-2011 03:02 PM CET | Industry, Real Estate & Construction

Press release from: GOEPEL electronics Ltd.

GOEPEL electronics

GOEPEL electronics

During the Boundary Scan Days® 2011 in Germany, GOEPEL electronic introduced the TIC02/PMU, another TAP Interface Card (TIC) within the frame of the technologically leading JTAG/Boundary Scan hardware platform SCANFLEX®.

The new module enables the test of peripheral networks in particular for shorts and open connections without powering up the UUT. Using this option, dangerous solder faults can be detected before possibly leading to latent or permanent damages of the integrated circuit when operation voltage is switched on.

“The new hardware option is our reaction to the specific requirements in mission critical applications due to calculated reliability, standardised test quality and process risk minimisation,“ says Stefan Meissner, GOEPEL electronics’ Marketing and PR Manager. “In combination with the relevant software tools, users are now able to develop analogue opens/shorts tests fast and efficiently, enhancing modern test methods such as Boundary Scan, processor emulation test or chip embedded instruments. At the same time, we extend the leading position of our unique hardware platform SCANFLEX.”

The TIC02/PMU module is pin compliant to the already existing TAP Interface Card TIC02 and additionally features a powerless measurement unit (PMU). In test cases the PMU is interposed as signal source to the UUT’s native operation voltage connections, enabling opens/shorts test of the contacted nets in connection with externally switched I/O channels. A Multitude of parallel SCANFLEX I/O modules, e.g. SFX 5296 or PXI 52192 can be utilised as I/O channels.

TIC02/PMU is designed for direct build-in into a UUT fixture and can be connected to any TAP slot of a SCANFLEX® TAP Transceiver at distances of several meters. In the Boundary Scan mode the hardware works as normal TAP interface. It enables an extremely simple and backwards-compatible migration to the analogue opens/shorts test method.
The new TAP Interface Card is fully supported by the industrially leading JTAG/Boundary Scan software platform SYSTEM CASCON™ from version 4.5.4 onwards. It also includes a Test Generator that recognises connected I/O test channels and generates parametric control sequences for the TIC02/PMU.

About GOEPEL electronic:
GOEPEL electronic is a worldwide leading vendor of professional JTAG/Boundary Scan solutions and technology innovator of IP based instrumentation. With more than 100 product launches the company became the biggest innovator in the market within the last five years. A network of branch offices, distributors and service partners ensures the global availability of the products as well as the support of the more than 7,000 system installations. Founded 1991 and headquartered in Jena, Germany, GOEPEL electronic employs currently about 170 employees and generated a revenue of about 21 Million Euro in 2010 (ca. $16.5 Mio). GOEPEL electronic’s products won several awards in recent years and are used by the leading companies in telecommunication, automotive, space and avionics, industrial controls, medical technology, and other industries. Further information about the company and its products can be found on the internet at

GOEPEL electronics Ltd.
Unit 1A
The Old Granary
Westwick, Cambridge

Phone +44-1223-858298
Fax +44-1223-257800

Stefan Meissner

This release was published on openPR.

Permanent link to this press release:

Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release GOEPEL electronic combines Boundary Scan with analogue Opens/Shorts Tests here

News-ID: 171010 • Views: 1326

More Releases from GOEPEL electronics Ltd.

G-TAP – versatile Contacting Solution for Assembly Test
GOEPEL electronic introduces G-TAP, a worldwide unique solution for the versatile contacting of electronic assemblies - in particular the JTAG bus - for testing and programming. The G-TAP is not a single product but an overall concept, because the module can be utilized in stand-alone operations as well as an integrated solution in existing electronic and optical test systems such as Flying Probers, In-Circuit Test or AOI systems. “In the development
GOEPEL electronic demonstrates first ChipVORX Prototype Instruments for Bit Erro …
At the International Test Conference (ITC) GOEPEL electronic introduces the first ChipVORX® model prototype to execute Bit Error Rate Tests (BERT) using on-board Field Programmable Gate Arrays (FPGA). The new solution enables the utilisation of FPGA Embedded Instruments in the form of special softcores for the test and design validation of high-speed I/O. This will allow users to evaluate the quality of interconnections by way of bit error rates and also
New Inline Programming System combined with Embedded Test
GOEPEL electronic announced the market introduction of additional RAPIDO™ series inline production systems for high-speed programming as well as board test based on the newest Embedded System Access (ESA) technologies. The new models named RPS3000-(x) support double-sided probing for up to 3000 nails. Non-volatile memories such as Flash, Microcontrollers (MCU) and Programmable Logic Devices (PLD) can be on-board programmed even faster and more reliably. Based on an enhanced SCANFLEX® architecture with
Parallel Inline AOI for THT Components and THT Solder Joints in one System
GOEPEL electronic presents the world debut for the automatic inspection of THT assemblies: the multi awarded OptiCon THT-Line AOI system now provides a parallel inspection of THT components and THT solder joints. In a typical THT production line, now it is possible to inspect mounted components before the soldering processes as well as PCB solder joints during the return transport. This gain in effectiveness for users is enabled by the OptiCon

All 5 Releases

More Releases for Boundary

XJTAG releases boundary scan for Teradyne TestStation
Cambridge, UK, 21 October 2014 — XJTAG, a world leading supplier of boundary scan technology, today announced the release of the XJLink2-CFM and XJLink2-CFMx. The new modules provide Teradyne users with integrated access to XJTAG’s powerful test and programming tools, operating under the control of the TestStation™ test program. With a JTAG solution installed internally to the TestStation In-Circuit Test System, the complexity and recurring cost impact of fixture-based test can
World’s first Boundary Scan Controller with Wireless LAN Interface
GOEPEL electronic announces the introduction of SFX/WSL1149-(x), the world’s first controllers for Wireless LAN (WLAN) as an addition to the company’s Boundary Scan hardware platform SCANFLEX®. The new Boundary Scan controller series provides a Triple Stream/Dual Band WLAN interface for theoretical transmission speed up to 450 Mbps, enabling wireless utilisation of the newest Embedded System Access (ESA) technologies for testing, programming and debugging of complex chips, boards, and entire systems. “Our goal
Boundary Scan Platform SCANFLEX® extends Integration of Bus Interface Tests
GOEPEL electronic, world-class vendor of JTAG/Boundary Scan solutions introduces SFX-9305/R, another I/O module within the frame of the Boundary Scan hardware platform SCANFLEX®. The new member to the module series provides five ports for the universal test of industrial interfaces, which can be completely electrically isolated per relays. Users are now able to combine functional test procedures for bus interfaces such as LAN, USB, CAN or LIN with vector-less working
Corelis Releases New CD Version 7.5 Boundary-Scan Tool Suite
CD Features IEEE-1149.6 Test Development Automation, Expanded Scripting. Cerritos, CA, April 11, 2011 – Corelis, Inc., a leading supplier of high-performance boundary-scan test and measurement tools, announced the availability of the latest version of its powerful ScanExpress Boundary-Scan Tool Suite. The new Version 7.5 CD accelerates IEEE-1149.6 test development with new automation features. ScanExpress TPG now includes automatic identification and classification of resistors and capacitors involved in IEEE-1149.6 high speed, AC-coupled,
GOEPEL electronic introduces the worldwide smallest JTAG/Boundary Scan Controlle …
At “Southern Manufacturing & Electronics Exhibition” in Farnborough/UK, GOEPEL electronic introduced PicoTAP, the world’s smallest JTAG/Boundary Scan Controller with single TAP interface. The new and extremely handy solution has been designed for simple Boundary Scan test and programming tasks and for cost-critical applications throughout the entire product life cycle. If users want to upgrade their Boundary Scan applications at a later point in time, programs generated with PicoTAP are
Boundary Scan Software Platform SYSTEM CASCON™ automatically generates Project …
At the trade show SMT/Hybrid/Packaging GOEPEL electronic, world-class vendor of JTAG/Boundary Scan solutions compliant with IEEE Std.1149.x introduced a special documentation generator within the frame of the Boundary Scan software platform SYSTEM CASCON™. The newly developed tool named CASCON ProjectPublisher™ enables a full automation in generating complete project documentations and involves all relevant design and application information. “Based on the new ProjectPublisher™ our system software is the very first to