openPR Logo
Press release

PULS UK Gains ATEX Approval for Full Range of Redundancy Modules

04-07-2011 02:54 PM CET | Energy & Environment

Press release from: PULS UK Ltd

/ PR Agency: The Words Workshop
PULS UK, the world’s leading manufacturer of DIN rail power supplies

PULS UK, the world’s leading manufacturer of DIN rail power supplies

PULS UK, the world’s leading manufacturer of DIN rail power supplies has been granted ATEX approval for its full range of redundancy modules, allowing them to be used in potentially explosive environments. Redundancy modules are used to back up critical devices in the event of the main source of power being interrupted. The units have been tested to EN 60079 – 15 and are approved for use in Class 1 Zone 2 Category 3G explosive atmospheres. PULS says no electrical changes were necessary to achieve the approval and that the Standard had been met in essence by dual conformal coating the internal components of the units. The six ATEX approved PULS modules, which range in output from 10A to 80A, will not increase in price despite the higher specification.

ATEX, which derives its name from the French 'ATmosphère EXplosif' is the framework for controlling explosive atmospheres and the standards of equipment and protective systems used in them. By achieving EN 60079 – 15 approval PULS UK is now well placed to become a major supplier of redundancy modules in this important sector of the market.

An explosive atmosphere is created when dust, mist or gases become mixed with the air and produce a flammable substance. Many industrial environments may contain, or have the potential to produce, an explosive atmosphere. Examples include places where production activities create or release flammable gases or vapour, such as paint spraying, or in factories handling fine organic dusts such as grain flour or wood.

PULS UK is a specialist manufacturer of DIN Rail power supplies and has developed some of the most advanced technologies for use within power supplies allowing them to achieve the highest efficiencies. PULS UK is a subsidiary of PULS GmbH, based in Munich, Germany. With three factories it is the second largest producer of DIN Rail power supplies in the world.

David Jordan
The Words Workshop Ltd
26 Swanwick Lane
Broughton
Milton Keynes
MK10 9LD

Tel: +44 (0) 1908 695500
Fax: +44 (0) 1908 690099
mailto:david@thewordsworkshop.co.uk
http://www.thewordsworkshop.co.uk

All business enquires to:

Ellie Jones
PULS UK Ltd
Unit 10 Ampthill Business Park
Station Road
Ampthill
Bedfordshire
MK45 2QW

Tel: +44 (0) 330 999 9988
Fax: +44 (0) 1525 841291
mailto:ellie.jones@puls.co.uk
http://www.puls.co.uk

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release PULS UK Gains ATEX Approval for Full Range of Redundancy Modules here

News-ID: 169935 • Views:

More Releases from PULS UK Ltd

New Dimension Range from PULS UK Delivers Mid-Range Power at an Economy Price
New Dimension Range from PULS UK Delivers Mid-Range Power at an Economy Price
DIN-rail power supply manufacturer PULS UK has extended its versatile Dimension range with the introduction of a new CPS20 480 watt unit available in both 24 volt and 48 volt outputs. The new CPS20 power supply unit provides many desirable features: almost no inrush current, helping reduce wiring and fusing costs; overload power of 120% that is available continuously below 45°C ambient making it effectively a 576W unit; and a power
PULS UK releases 2012 product catalogue
PULS UK releases 2012 product catalogue
DIN-rail power supply manufacturer PULS UK has announced the release of its 2012 catalogue featuring the latest products and innovations from the German company’s extensive range. The catalogue gives clear easy to read information enabling both technical and non-technical readers to make the right choices. PULS power supplies are renowned for their high-quality and efficiency with single and three phase input models, from 15 to1000 watt and output voltages of between
PULS UK’s New Website Streamlines Product Selection
PULS UK’s New Website Streamlines Product Selection
Leading Din Rail power supply manufacturer PULS UK has announced the launch of its new searchable website www puls co uk. The new site gives customers detailed information about the full range of PULS UK’s products as well as important contact details and company information. Visitors to the site will be able to use a special search facility to find the most suitable product for their application simply by entering the specification
New power supply from PULS UK improves efficiency and reliability of wind turbines
New power supply from PULS UK improves efficiency and reliability of wind turbin …
PULS UK has announced the introduction of its PAS395 power supply developed to charge the latest super-capacitors used to power wind turbine pitch control systems. Super-capacitors (electrical double-layer capacitors) are rapidly replacing the lead acid batteries previously used to drive the powerful motors controlling the giant turbine blades. PULS’s PAS395 delivers a high-charging current - a two-Farad capacitor will be fully charged in five minutes – and the unit’s high efficiency

All 5 Releases


More Releases for DIN

Perle Launches DIN Rail Hi-PoE Injectors
Perle Systems, a global provider of advanced Device Networking Hardware, today announced the availability of DIN Rail PoE Injectors. INJ PoE Injectors are designed to provide up to 60W of IEEE802.3bt compliant power over Ethernet cabling to connected devices such as wireless access points, pan-tilt-zoom (PTZ) cameras and video phones. Power over Ethernet Injectors enable increased flexibility for the location of installed equipment and can support long Ethernet runs up to
Perle launches DIN Rail Patch Panels
Simplify the connection between field cabling and control cabinet cabling NASHVILLE, TN—June 25th, 2019 — Perle Systems, a global provider of advanced Device Networking Hardware, today announced the availability of DIN Rail Patch Panels. One-to-one patch panels enable organised, flexible and easy connections between field cabling and the control cabinet. Standard Ethernet patch cables are used between the patch panel and the control cabinet equipment, such as PLCs, switches and routers. Through
Global DIN Rail Mounted Accessories Market Professional Survey Report
This report studies DIN Rail Mounted Accessories in Global market, especially in North America, China, Europe, Southeast Asia, Japan and India, with production, revenue, consumption, import and export in these regions, from 2013 to 2018, and forecast to 2025. This report focuses on top manufacturers in global market, with production, price, revenue and market share for each manufacturer, covering ABB Eaton WAGO TE Connectivity Connectwell Schneider Electric Omron Wieland Electric
Global DIN Rail Terminal Blocks Industry Market Analysis & Forecast
Global DIN Rail Terminal Blocks Industry Market Analysis & Forecast 2018-2023, the revenue is valued at USD XX million in 2017 and is expected to reach USD XX million by the end of 2023, growing at a CAGR of XX% between 2018 and 2023. The production is estimated at XX million in 2017 and is forecasted to reach XX million by the end of 2023, growing at a CAGR of
DIN Connectors Market to Record an Exponential CAGR by 2018 to 2028(According to …
DIN Connectors- Market Overview A DIN connector is a type of electronic connectors that are used for various applications. DIN connectors contains straight round pins, which are composed of a protective metal skirt.  The DIN Connectors are used parimarily in the analog audio/video devices and for electrical connections. DIN connectors were also used in earlier PCs for mice and keyboards as plugs and sockets. Eventually, all DIN-Connector-based mice and keyboards were
New ex-stock centenary catalogue from Lee Spring has more DIN-Plus springs – s …
Lee Spring’s new Centenary Catalogue issue 25 includes a full new section of DIN-Plus parts 2 and 1 compression springs. This extensive 525 series of new parts in end-closed passivated stainless steel wire, or end-squared and ground plated spring steel, provides manufacturers with a welcome resource for rapid delivery of standard parts, as well as a springboard for specification of custom units to suit those slightly different installations. DIN part