Press release
Impedance measurement within Micro-Ohm range
FuelCon further enhances impedance analyzer device TrueData-EISResponding to changing market and customer requirements for impedance measuring devices, FuelCon has enhanced its TrueData-EIS electrochemical impedance spectrum analyzer, allowing now measurements within Micro-Ohm impedance range.
Impedance spectroscopy plays a major role especially for battery characterization by providing, amongst others, information about quality or deterioration behaviour. The lately observable trend of Li-Ion batteries towards higher capacities implies significant smaller internal resistances inside the cell. This means, measurements within decreasingly measuring ranges and very high accuracy are needed.
For achieving fast and precise evaluation of those small impedances, the AC modulation current must increase during galvanostatic measurements in order to receive a respectively higher voltage response. With the enhanced TrueData-EIS of FuelCon the modulation current can be varied in a range between 2.5A and 10A, depending on the requirements. Even at very low frequencies, this ensures accurate measuring of impedances within 2 periods. Optionally, the device provides impedance analysis without DC offset, which means test item’s state of charge (SOC) will be unchanged. With this flexibility, the TrueData-EIS can be easily integrated into existing testing systems.
FuelCon is the global leading supplier of test and diagnostic systems for fuel cells, and batteries. For years, the FuelCon name is recognized for extraordinary product quality, high technical standard, dedication to costumer service and innovation. With its test station series “Evaluator-LT” and “Evaluator-HT” the company manufactures test rigs for all typical fuel cell technologies like PEM, DMFC, SOFC or MCFC in a power range between a few watts up to 150kW fuel cell performance. The “Evaluator-B” enables the fully automated testing of batteries, super capacitors and energy management systems. Furthermore, FuelCon offers with the product lines TrueData and TrueXessory a various portfolio of diagnostic equipment and accessories. Aside its headquarters in Germany, FuelCon is with its subsidiary FuelCon Systems Inc. and several Representatives active in Europe, North America and Asia.
FuelCon AG
Steinfeldstr. 1
D-39179 Magdeburg – Barleben
T + 49 39203 514 400
F + 49 39203 514 409
www.fuelcon.com
Press contact: Ms. Andrea Bartels
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Impedance measurement within Micro-Ohm range here
News-ID: 161637 • Views: …
More Releases from FuelCon AG

Added value due to standard configuration – FuelCon test stations convince by …
Testing and validating fuel cells is a highly complex procedure, where many single steps need to intertwine in order to eventually supply reliable measuring data and results. In dependence on the respective technology, this means especially an extensive preparation of test runs, where the test item, the test station and the test procedure as such must be enabled and adjusted for the corresponding requirements.
As an experienced manufacturer of test stations…

FuelCon expands portfolio for EIS measurement
For many years, FuelCon provides test stations for fuel cells and batteries that are used as reliable test equipment for R&D, validation or quality assurance. An important and complementary diagnostic tool for fuel cell and battery testing is an electrochemical impedance spectrometer. For this application, FuelCon has the TrueData-EIS – a powerful solution for daily use that can be integrated into a test station or as stand-alone version.
Depending on customer's…

FuelCon provides powerful test equipment of the next generation for automotive t …
For many years, car manufactures around the world research and develop various concepts for a more efficient powertrain. In this process, the main goal is the reduction of global CO2 emissions. Besides the optimization of combustion engines, the focus is set on the establishment of alternative powertrain technologies in a serial production that work without fossil fuels.
The global automotive industry stuck in an enduring conversion process that influences several aspects…
More Releases for TrueData
Asia Pacific Compound Feed Market Size, Share Projections 2031 by Key Manufactur …
USA, New Jersey: According to Verified Market Research analysis, the Asia Pacific Compound Feed Market size is reached a valuation of USD 556.59 Billion in 2024, with projections to achieve USD 8829.48 Billion by 2032, demonstrating a CAGR 41.27% from 2026 to 2032.
What is the current outlook for the Asia Pacific compound feed market and what are the major growth drivers?
The Asia Pacific compound feed market is experiencing robust growth,…
Stock Auto Trading Software Market Size, Potential Scope 2031 By Key Players- Re …
USA, New Jersey: According to Verified Market Reports analysis, the global Stock Auto Trading Software Market size was valued at USD 6.2 Billion in 2024 and is estimated to reach USD 12.8 Billion by 2033, growing at a CAGR of 8.5% from 2026 to 2033.
What is the current market outlook and growth forecast for the Stock Auto Trading Software Market?
The Stock Auto Trading Software Market is experiencing rapid growth driven…
FuelCon provides powerful test equipment of the next generation for automotive t …
For many years, car manufactures around the world research and develop various concepts for a more efficient powertrain. In this process, the main goal is the reduction of global CO2 emissions. Besides the optimization of combustion engines, the focus is set on the establishment of alternative powertrain technologies in a serial production that work without fossil fuels.
The global automotive industry stuck in an enduring conversion process that influences several aspects…
FuelCon delivered test system for new battery laboratory of TÜV Rheinland
Beginning of June, TÜV Rheinland LGA Products GmbH has opened a new battery test laboratory in Nuremberg, Germany equipped with FuelCon testing system. During the ceremony, opened by Managing Director Dipl.-Ing. Jörg Mähler and Dr. Armin Rudolph of Bavarian State Ministry for Economic Affairs, Infrastructure, Transportation and Technology, the invited guests could view behind the scenes. Thereby, also the FuelCon Evaluator-B30 battery test station was introduced.
Besides the Evaluator-B30 that contains…
Perfected testing solutions for battery production - German test station supplie …
German test station supplier FuelCon AG introducing test systems for quality management in battery production
To meet the needs for continuous quality assurance within the production of batteries FuelCon introduced a modularized cell tester and a end-of-line tester for completely assembled batteries.
The cell test unit is able to check the parameters of the incoming battery cells before assembling into the battery housing. The cell test unit allows cell adaptation, cell…
Energy-saving cycling and testing of battery cells
FuelCon will introduce its new product TrueData-EPCD at AABC Europe conference in Mainz.
The TrueData-EPCD combines all features of a multi-channel charge / discharge unit with a new and innovative concept for minimizing energy consumption in battery fields through so-called EPCD technology. The acronym EPCD thereby stands for Energy-Pump-Charging-Discharging.
Conventional methods allow energy feedback into existing grids. Due to efficiency losses this is technically and economically worthwhile only for channel power higher…