openPR Logo
Press release

GOEPEL electronic continues Webinar Series on Automated Optical Inspection

01-12-2011 02:09 PM CET | Industry, Real Estate & Construction

Press release from: GOEPEL electronics Ltd.

GOEPEL electronic will run four additional webinars about Automated Optical Inspection (AOI) issues on throughout February 2011. The events will start at 11 am EST and will last about one hour each.

The first webinar on February 3rd will provide an overview of test/inspection capabilities of Automated Optical Inspection (AOI) systems in general, with a discussion of technology specific advantages and limitations of various AOI methodologies.

The second webinar on February 10th focuses on the comparison of various test technologies, including manual inspection, In-Circuit Test (ICT), Functional Test, JTAG/Boundary Scan, and AOI. Defect types will be discussed, as well as if and how certain defects can be detected with these test methods.

The February 17th webinar will outline ways to integrate AOI systems in electronics manufacturing/production environment. Topics to be discussed are in-line, off-line, and hybrid integrations including examples for each of those options.

The final webinar in this series takes place on February 24th and will feature a discussion of various illumination strategies used in AOI systems, outlining how smart illumination schemes can provide enhanced defect detection.

Interested parties are encouraged to register online at www.goepelusa.com/events.html or contact GOEPEL electronics LLC at events@goepelusa.com.

About GOEPEL electronic:
GOEPEL electronic is a worldwide leading vendor of professional JTAG/Boundary Scan solutions and technology innovator of IP based instrumentation. With more than 100 product launches the company became the biggest innovator in the market within the last five years. A network of branch offices, distributors and service partners ensures the global availability of the products as well as the support of the more than 7,000 system installations. Founded 1991 and headquartered in Jena, Germany, GOEPEL electronic employs currently about 160 employees and generated a revenue of about 21 Million Euro in 2010 ($16.5 Mio). GOEPEL electronic has continuously been ISO9001 certified since 1996 and has been honoured with TOP-JOB and TOP-100 awards for being one of the best medium-sized companies in Germany. GOEPEL electronic’s products won several awards in recent years and are used by the leading companies in telecommunication, automotive, space and avionics, industrial controls, medical technology, and other industries. Further information about the company and its products can be found on the internet at www.goepel.com.

GOEPEL electronics Ltd.
Unit 1A
The Old Granary
Westwick, Cambridge
CB24 3AR/UK

Phone +44-1223-858298
Fax +44-1223-257800
www.goepel.co.uk

Stefan Meissner
press@goepel.com

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release GOEPEL electronic continues Webinar Series on Automated Optical Inspection here

News-ID: 158240 • Views:

More Releases from GOEPEL electronics Ltd.

G-TAP – versatile Contacting Solution for Assembly Test
G-TAP – versatile Contacting Solution for Assembly Test
GOEPEL electronic introduces G-TAP, a worldwide unique solution for the versatile contacting of electronic assemblies - in particular the JTAG bus - for testing and programming. The G-TAP is not a single product but an overall concept, because the module can be utilized in stand-alone operations as well as an integrated solution in existing electronic and optical test systems such as Flying Probers, In-Circuit Test or AOI systems. http://www.goepel.com/en/news/newsdetails/article/2012/11/15/g-tap-versatile-contacting-solution-for-assembly-test-from-goepel-electronic.html “In the development
GOEPEL electronic demonstrates first ChipVORX Prototype Instruments for Bit Error Rate Tests
GOEPEL electronic demonstrates first ChipVORX Prototype Instruments for Bit Erro …
At the International Test Conference (ITC) GOEPEL electronic introduces the first ChipVORX® model prototype to execute Bit Error Rate Tests (BERT) using on-board Field Programmable Gate Arrays (FPGA). http://www.goepel.com/en/news/newsdetails/article/2012/11/08/goepel-electronic-demonstrates-first-chipvorx-prototype-instruments-for-bit-error-rate-tests.html The new solution enables the utilisation of FPGA Embedded Instruments in the form of special softcores for the test and design validation of high-speed I/O. This will allow users to evaluate the quality of interconnections by way of bit error rates and also
New Inline Programming System combined with Embedded Test
New Inline Programming System combined with Embedded Test
GOEPEL electronic announced the market introduction of additional RAPIDO™ series inline production systems for high-speed programming as well as board test based on the newest Embedded System Access (ESA) technologies. http://www.goepel.com/en/news/newsdetails/article/2012/11/13/new-inline-programming-system-combined-with-embedded-test.html The new models named RPS3000-(x) support double-sided probing for up to 3000 nails. Non-volatile memories such as Flash, Microcontrollers (MCU) and Programmable Logic Devices (PLD) can be on-board programmed even faster and more reliably. Based on an enhanced SCANFLEX® architecture with
Parallel Inline AOI for THT Components and THT Solder Joints in one System
Parallel Inline AOI for THT Components and THT Solder Joints in one System
GOEPEL electronic presents the world debut for the automatic inspection of THT assemblies: the multi awarded OptiCon THT-Line AOI system now provides a parallel inspection of THT components and THT solder joints. In a typical THT production line, now it is possible to inspect mounted components before the soldering processes as well as PCB solder joints during the return transport. http://www.goepel.com/en/news/newsdetails/article/2012/11/13/parallel-inline-aoi-for-tht-components-and-tht-solder-joints-in-one-system.html This gain in effectiveness for users is enabled by the OptiCon

All 5 Releases


More Releases for AOI

AstoCare joins hands with AOI- India
In partnership with Academy of Oral Implantology - India, AstoCare intends to speak at the prestigious SPRING SUMMIT 2020 (of implantology) August 22nd and 23rd, 2020. All stakeholders are invited, with much gusto, to grace the event with their benevolent presence. See you there! To register yourself for the event, please click the below link and fill the form: https://docs.google.com/forms/d/e/1FAIpQLSeqx-vtLS0SHEWCTWILGpak0avcSJCP6q4fidZpMuNpYxp26A/viewform For more, LIVE CHAT with us at www.astocare.com or write to us at hello@astocare.com. Industrial area Phase
3D AOI systems to hold the largest size of the automated optical inspection (AOI …
Automated optical inspection (AOI) systems are used for the inspection of printed circuit boards (PCBs). The system is superior and less time consuming compared to manual inspection. AOI systems are preliminarily used for the detection of defects such as soldering defects, component defects, and ball grid arrays (BGA), and chip-scale packaging (CSP) defects. https://www.marketsandmarkets.com/Market-Reports/automated-optical-inspection-system-market-179056156.html The global automated optical inspection (AOI) system market size is expected to reach USD 1,583 million by
Automated Optical Inspection Market Report 2018: Segmentation by Type (2D AOI Sy …
Global Automated Optical Inspection market research report provides company profile for Nordson Corporation, Camtek Ltd, AOI Systems Ltd, Mirtec, Viscom AG, Daiichi Jitsugyo, Omron Corporation, Test Research Inc, VI Technology, Cyberoptics Corporation and Others. This market study includes data about consumer perspective, comprehensive analysis, statistics, market share, company performances (Stocks), historical analysis 2012 to 2017, market forecast 2018 to 2025 in terms of volume, revenue, YOY growth rate, and CAGR
3D AOI Systems Market - The Capability Of Inspecting The Co-Planarity Of The Com …
3D aoi enables to measure the height of all parts on a PCB by the unique optical design. It will reduce the programming time of the inspection data and debugging. Also, inspections which were considered difficult like dry joint, shifted lead, lifted lead and the lifted micro chip can be easily done with very high accuracy.3D aoi can measure accurate height of parts by projecting the stripe pattern from the
Inline AOI Systems Market - Growth of Inline Aoi System Market Is Boosted By Inc …
Automated optical inspection (AOI) is a process of visual inspection which is operated automatically to detect different manufacturing defect such as catastrophic failure and quality defect. This technology is adopting by different types of manufacturer such as printed circuit board manufacturing, liquid - crystal display (LCD) manufacturing, transistor manufacturing, others. Moreover, AOI systems has been segmented in two types such as desktop AOI and Inline AOI systems. Inline AOI
Fast Generation of production-oriented AOI Programs
The newest version of GOEPEL electronic’s AOI system software features a special highlight. An integrated debug statistics captures AOI relevant variations in the production process and provides them for statistical evaluations. Hence, OptiCon series AOI systems enable a highly effective and convenient optimisation of generated test programs. Increased false call rates, originated in process tolerances or component variations, can be directly counter measured. The software package OptiCon PILOT 5.1