parts2clean 2010 – Highly Valuable Contacts, Concrete RFQs and Contract Conclusions
“parts2clean 2010 went extremely well for us. The trade fair has revealed that projects which were being discussed two or three years ago and were filed away that time due to the economic crisis, are now being seriously pursued again. Another positive aspect is that only visitors who are looking for solutions to concrete cleaning problems come to the event. But we were nevertheless surprised that we were able to sell a system to a company in Israel directly at the trade fair”, reports Willi Schneegaß, managing director of ipros Industrie-Produkte-Service-GmbH. Not only was ipros enthusiastic, but rather nearly all of the 220 participating companies from 15 countries. 16% came from outside of Germany, as opposed to 14% at the previous year’s event.
And the good atmosphere was not impaired by a drop in visitor numbers amounting to 7% compared with last year. Of the 4046 visitors who travelled to the trade fair from a total of 36 countries in Europe, the Americas and Asia, 54.2% were attending parts2clean for the first time. 18.1% visited the leading trade fair promoted by fairXperts GmbH with the intention of placing orders, and 25.3% wanted to prepare themselves for investment decisions. A total of 89.4% of all visitors are involved in company investment decisions.
Qualified Technical Discussions with Decision Makers
Not only do the numbers revealed by the visitor survey substantiate the fact that parts2clean is visited by corporate decision makers, exhibitor statements confirm this as well. “We’re very satisfied with the number of leads as well as with their quality. The visitors come with targeted RFQs, which indicates that the trade fair organisers have done a good job”, concludes Patricia Silva from the marketing department at the KAM Industry & Automotive Aftermarket Division of Henkel AG & Co. KGaA. Markus Mitschele from process engineering at Höckh Metall-Reinigungsanlagen GmbH was also very pleased with his company’s trade fair participation: “We’re surprised at the large number of top quality leads. We were able to conduct concrete project negotiations too, which had been put on the back burner during the past two years. And there were lots of targeted new RFQs, many of which came from the automotive industry.” The booth team of a renowned sensor manufacturer was also pleasantly surprised, who was exhibiting at parts2clean for the first time: “As compared with other trade fairs the event is relatively quiet, but the discussions were very valuable and roughly 25% of our visitors came from outside of Germany. As a result of visits on the first two days we’ve already dispatched a number of quotations, and we believe that we’ll be able to generate good turnover with our trade fair presentation.” Karina Mack, managing director at AdunaTEC GmbH, calls it a super trade fair: “One of the characteristics of parts2clean is that discussions here very quickly go into great depth with regard to problem solving and tasks at hand. Consequently, we’ve gotten so far with some negotiations at this year’s trade fair that we only need to get the signatures now.”
Various trends also became apparent due to requirements demanded by the visitors. For example, more attention is being focussed on the issue of residual contamination requirements – not only in the automotive industry, but rather in others as well such as machinery manufacturing, medical engineering and pharmaceuticals. And there’s greater demand for automated solutions too. Temporary corrosion protection is also playing a more and more important role. 53.4% of all surveyed visitors indicated that they use temporary corrosion protection in the production process. Interest in solutions offered by exhibitors from the extended COROSAVE product range was correspondingly great. “Our solutions met with very lively interest. We’re satisfied with our participation at the trade fair, and will exhibit again at parts2clean 2011”, sums up Reinhold Deimer, product manager for air cushion systems at Flöter Verpackungs-Service GmbH.
parts2clean Expert´s Forum with Record Breaking Participation
The expert´s forum held in German at parts2clean is a genuine crowd-puller, and has been organised by fairXperts with technical support from the Fraunhofer Alliance for Cleaning Technology since the trade fair’s premiere in 2003. With a total of 1719 participants, more visitors than ever have taken advantage of this source of information during the course of the
3-day trade fair this year, in order to expand their knowledge covering all aspects of industrial parts and surface cleaning, process engineering, ascertainment of residual contamination, bath maintenance and corrosion protection.
The next parts2clean will take place at the Stuttgart Exhibition Centre from the 25th through the 27th of October, 2011.
Our creativity, flexibility, commitment and quality are aligned to the customer’s requirements. For us, quality means fulfilling our customers’ requirements at all times, and exceeding them if possible.
SCHULZ. PRESSE. TEXT.
D-70825 Korntal, Germany
Phone: +49 (0)711 854085
Fax: +49 (0)711 815895
D-72639 Neuffen, Germany
Phone: +49 (0)7025 8434-0
Fax: +49 (0)7025 8434-20
This release was published on openPR.
Permanent link to this press release:
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release parts2clean 2010 – Highly Valuable Contacts, Concrete RFQs and Contract Conclusions here
News-ID: 148606 • Views: 1093
More Releases from fairXperts GmbH
As Clean as Necessary, as Economical as Possible
Solutions for Parts and Surface Cleaning in Manufacturing and MRO Processes Neuffen – The goal of industrial parts and surface cleaning is to assure the necessary degree of cleanliness for downstream processing or flawless functioning. Actual requirements vary significantly. But regardless of whether very simple or highly demanding cleaning tasks are involved, it’s also always important to complete them as efficiently as possible. Just how this can be done will be
parts2clean Exhibitors Profit from Increasing Investment
Neuffen – In the meantime, suppliers of equipment for industrial parts and surface cleaning are registering increasing numbers of received orders. Within this context, participation at parts2clean has had positive effects for many companies. This is certainly one of the reasons that the exhibitor list for the upcoming event, which will be held from 25 through 27 October 2011, already includes roughly 100 company names. And the industry expects demand
More Releases for German
Find the best conditions for your German mortgage with Your German Mortgage
During times of the Coronavirus, we are here to help you with finding the right financing for your property. Special times call for special measures, that's why it's now more important to find a trustworthy and experienced mortgage broker than ever. We got you covered from finding your property of dreams all the way to financing it. To ensure that, we have experts in almost every German major city,
German Maritime Security 2018, German Government Statement!
Despite all international and national efforts, piracy remains a serious peril for the international shipping industry. Especially in Asia (i.e. Chittagong/Bangladesh or on the Strait of Malacca), but also in South America (e.g. Bay of Santos/Brazil or in the port of Callao/Peru) robbery or piracy there has recurred in the recent past. At the West African coast the number of incidents had raised even by 50% with 66 incidents this
More German Investments Mean More German Translations
Why Language Continues to be an Obstacle for Investing in Germany Germany is one of the prime markets for foreign investments, with an estimated 4% of global direct investment making its way into the country. In fact, the world’s second richest man, Warren Buffett, who is only beaten to the top spot on the financial leaderboard by Microsoft Founder Bill Gates, believes Germany to be a ‘great market’, and confirms the
German Design Award 2015
German Design Council Awards a Special Mention to the LR 1000 Laboratory Reactor and Nominates the Tube Mill Staufen, Germany, February 23, 2015 — For the second time, a device produced by IKA® Werke has received the "Special mention for exceptional design quality" award from the German Design Council. The company was presented with the award in the "Excellent Product Design — Industry" category as part of the German Design Award 2015
German Local Trade Tax
All the companies in Germany are liable to pay not only corporate income tax, whose rate is nowadays about 15% of the annual profit of the company, but also trade tax (Gewerbesteuer), which is a tax of German characteristics. Why would we say that trade tax is of German characteristics? Because it is different from the corporate income tax, which is charged by the German Federal Government and it is difficult
ISPA – German Masters 2008
Magdeburg – Over the long weekend of the 4. Mai more than 1.000 Skat players filled the Mittelland hall in Barleben. The tournaments of the 30. German Mastery and the 27. open International German Single Mastership were held by the International Skat Players Association, ISPA Germany. Patrons of the Games were the 1st Barleber Skat sports club e.V. and the Skat club \"Burger Ihleskater\", whose good organization together with the