openPR Logo
Press release

Metallurgical High Vacuum Exhibits at Furnaces North America

09-30-2010 09:36 AM CET | Industry, Real Estate & Construction

Press release from: Metallurgical High Vacuum

/ PR Agency: Armada Group
MHV  HS-430 Vacuum Pump for Tough Heat Treating Applications

MHV HS-430 Vacuum Pump for Tough Heat Treating Applications

Fennville, MI--- Metallurgical High Vacuum will show its newest vacuum pump a 430-CFM HS 430 at Booth # 620-622 at the FNA show in Orlando, Florida*, on October 5—6, 2010. The booth will also feature information on rebuilt vacuum pumps for tough heat treating applications, at which MHV excels. Also on display will be mechanical seal retrofits for the Roots® 615 blower and Stokes® 306/310 blower.

Below the cost of a replacement unit, MHV rebuilt pumps have become the standard for many customers requiring all-new pumping capacity. “Once they get a pump from MHV, they can see the high quality that our American-made company delivers. They get a pump that looks like new and runs even better. “We have customers that can go anywhere for their pump rebuilding, but they come back to MHV because of our quality and service,” notes Geoff Humberstone, President. “Knowledgeable customers come back again and again for our quality and long service life, because it represents a better long term value.”

A customer at a major thermal processor recently noted: “Although they may be a bit more than some others, the MHV rebuilt pumps last longer and afford significant cost savings when compared to buying a new one. They can do it better than anyone else by a country mile.”

MHV has put their vacuum experience of three decades on the line for their customers who depend on their vacuum processing systems 24/7 with reliability regardless of the original manufacturer: Stokes®, Kinney®, Tuthill MD®, Beach-Russ®, Leybold®, Roots®, Varian®, Edwards® Welch®, Ulvac®, or others.

“We are one of the best kept “secrets” in the vacuum business, Geoff Humberstone, MHV President, commented: Our capabilities range from new and rebuilt vacuum pumps and pumping systems to design and fabrication of chambers, piping, and custom designs. See how it’s done on the video tour at: www.methivac.com or call MHV at: 877-787-9880 for more information and pricing on your next vacuum project.

.

* FNA at the Caribe Royale Resort & Convention Center
8101 World Center Drive,Orlando, FL 32821, www.cariberoyale.com
More information at: http://www.furnacesnorthamerica.com/

About Metallurgical High Vacuum
Metallurgical High Vacuum Corporation is a vital supplier in the vacuum technology industry. With three decades in the business, they have earned a reputation for responsiveness with high quality engineering and manufacturing that is unsurpassed. Customers depend on MHV for keeping their operations running, and costs under control. MHV products and services include new and rebuilt pumps and systems, vacuum piping and manifolds, flexible connectors, vacuum valves, custom oil filtration systems, helium leak testing, and field repair. Rental pumps and blowers are also available; call to check inventory

Corp. Contact:
Geoff Humberstone, Pres.
Metallurgical High Vacuum
6708 124th Avenue
Fennville, MI 49408
Email:geoff-h@methivac.com
Tel: 269-543-4291
Toll-free: 877-787-9880
FAX: (269) 543-4750
www.methivac.com
Press Contact: Jim Martin
Metallurgical High Vacuum
6708 124th Avenue
Fennville, MI 49408
Email: jmartin@armadagrp.com
Tel: 781-956-8521
www.methivac.com

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Metallurgical High Vacuum Exhibits at Furnaces North America here

News-ID: 146168 • Views: 1091

More Releases from Metallurgical High Vacuum

Major U.S. Heat Treater Selects MHV Pumps for Vacuum Furnace Application
Survivor™ models increase service life and reliability Fennville, MI --- MHV shipped another Survivor™ model HD300 vacuum pump for a heat treating furnace built by Ipsen® going to a major heat treater in the USA. According to Geoff Humberstone, MHV President," The customer chose the MHV pumps for their longer life capabilities with positive pressure oil filtration in severe environments. The HD300 provides longer life because of it robust construction and
Metallurgical High Vacuum Announces High Vacuum Newsletter
Fennville, MI---Metallurgical High Vacuum has created a new “High Vacuum News” to provide heat treat industry professionals with tips and hints to keep their vacuum pumps running strong. As Geoff Humberstone, MHV President, comments: “This year marks 30 years for us as Metallurgical High Vacuum. Back in 1981, I saw the need for vacuum design and consulting and started the company. Within four years we added pump remanufacturing because we
Metallurgical High Vacuum Ships Vacuum Chambers
Special Designs are Built to Customer Specifications Fennville, MI--- Metallurgical High Vacuum recently shipped two chambers for customer-specific applications. One vacuum chamber is over 72” high and will be used in atomic layer deposition (ALD) to strengthen glass used in LCD's for phones. The other chamber is a 12-inch square design that will be used to weld silicon sticks, complete with a two-stage booster vacuum pumping system. Both chambers are
Metallurgical High Vacuum Debuts "Torture Tank" To Assure Peak Pump & Blower Per …
Fennville, MI--- Until now, most replacement vacuum pumps were tested under actual conditions only when they were first connected to a customer’s heat treating chamber. Now, Metallurgical High Vacuum puts their new and rebuilt pumps and blowers through their torturous “stress test” at the factory to assure performance under pump-down conditions. As Geoff Humberstone, MHV President, comments: “We have always done a blank off test and a 20-24 hour

All 5 Releases


More Releases for MHV

PayorCRM now supports Netsuite !
PayorCRM , One of the leading providers of Receivables management solutions for Small businesses in US and UK has added support for Netsuite. With this integration payorCRM increases its coverage from Small businesses to Small and Medium businesses. PayorCRM provides a cloud based receivables management solution that helps businesses improve their cashflows. They does this by providing its clients 3 different options to accepts payments from its customers - Payments from
Major U.S. Heat Treater Selects MHV Pumps for Vacuum Furnace Application
Survivor™ models increase service life and reliability Fennville, MI --- MHV shipped another Survivor™ model HD300 vacuum pump for a heat treating furnace built by Ipsen® going to a major heat treater in the USA. According to Geoff Humberstone, MHV President," The customer chose the MHV pumps for their longer life capabilities with positive pressure oil filtration in severe environments. The HD300 provides longer life because of it robust construction and
Metallurgical High Vacuum Announces High Vacuum Newsletter
Fennville, MI---Metallurgical High Vacuum has created a new “High Vacuum News” to provide heat treat industry professionals with tips and hints to keep their vacuum pumps running strong. As Geoff Humberstone, MHV President, comments: “This year marks 30 years for us as Metallurgical High Vacuum. Back in 1981, I saw the need for vacuum design and consulting and started the company. Within four years we added pump remanufacturing because we
Metallurgical High Vacuum’s TechCon 2009 Exhibit to Focus on Higher Speed Vacu …
Fennville, MI---Visitors to Metallurgical High Vacuum’s Booth 837 at the TechCon Conference and Exposition* May 11 & 12 will learn how they can achieve faster process cycles using the 430 CFM rated pumping speed of the model HS 430 rotary piston pump. The MHV HS 430 affords a pump down time of 2.43 minutes compared 3.10 minutes for a Stokes 412 model, on a 70 cubic foot volume to 100
Metallurgical High Vacuum Announces Online Plant Tour
Video Shows Savings by Rebuilding Older High Vacuum Pumps Fennville, MI June 28, 2008--- Metallurgical High Vacuum Corporation (MHV) announces the release of a new video production that shows MHV’s capabilities through demonstrations and interviews. Rebuilding of rotary piston high vacuum pumps, blowers, and diffusion pumps offers users substantial cost and time savings over buying new equipment. Below the cost of a replacement unit, MHV rebuilt pumps have become the
Metallurgical High Vacuum Announces Vacuum Pump Solutions
Diagnostic Kit Simplifies System Maintenance & Troubleshooting Fennville, MI --- Metallurgical High Vacuum Corporation (MHV) announces the release of a valuable new tool for vacuum system users to check their vacuum pump’s operating condition. The “Vacuum Pump Diagnostic Test Kit” contains detailed information for evaluating all makes of vacuum pumps to help find potential problems that can cause poor vacuum pump and system performance. When your pump is not able