Workplace Environmental Monitoring Methods
CAS DataLoggers supplied the workplace environmental monitoring solution for a factory with a small series of office rooms experiencing serious air quality issues. Employees reported headaches during the work day, indicating a possible lack of adequate ventilation. These workspaces were located next to the busy factory floor and suffered from an incidental buildup of contaminants. Nominal CO2 values usually range within 600-800 ppm (parts per million) in an office atmosphere, but due to outdated HVAC systems, these indoor levels topped 1,000 ppm, which ASHRAE industry guidelines marked as unhealthy. Additionally, the factory’s owners needed the ability to log temperature and humidity to gauge the effectiveness of their air conditioning control system, and all this data also had to be recorded for maintenance and documentation purposes.
The facility installed 2 T&D-76Ui CO2 + Temperature + Humidity Data Loggers, placing 1 in each office attached to the provided wall brackets. Each data logger also included sensors, batteries and free software. Additional T&D loggers were then connected to carbon dioxide sensors to monitor CO2 concentration at several different points in the facility.
The 3-channel data loggers simultaneously measured and recorded CO2 concentration, temperature, and humidity for proper workplace environmental monitoring. The T&D loggers each had a wide CO2 measurement range of up to 5,000 ppm and a logging capacity of 8,000 data sets (1 data set consisted of readings for all 3 channels). These dataloggers also featured a warning monitoring function with contact closure output.
The loggers also recorded a temperature measurement range from 0 to 45°C (32-113°F) and recorded the relative humidity from 10 to 90% RH. The combo loggers also supported user-set recording intervals from every second up to once an hour—in this case, they were set to log once a minute. All the recorded data was quickly downloaded to PC via USB connection. Current readings for all 3 channels were accessible–CO2 concentration, temperature, and humidity readings were all clearly shown on the large LCD screen.
Users also made extensive use of the included T&D Graph software to streamline data accessibility and organization, compatible with Windows 10. Help file documentation let them easily navigate all the options and features, including the creation of easy-to-read graphs where data from all 3 channels on each logger were simultaneously viewable in the same graph or table. Additional functions included the useful ‘Merge Channels’ function and the ‘Data List’. Users could also save data as ASCii text for use with common spreadsheet software such as Excel.
Following installation of the combo data loggers, the factory performed follow-up testing to show fluctuations and determine an optimal arrangement of fans and other methods to eliminate the high CO2 levels and increase the fresh air intake, thus avoiding any potential health problems. Since the loggers monitored temperature, humidity and CO2 simultaneously, there was no need to install 3 types of loggers (each with their own software), to do the logging over a longer time. The factory’s owners are now considering using their loggers in future applications for energy-saving measures with their air conditioning controls.
For further information on T&D-76Ui CO2 + Temperature + Humidity Data Loggers, workplace environmental monitoring, or to find the ideal solution for your application-specific needs, contact a CAS Data Logger Application Specialist at (800) 956-4437 or visit www.dataloggerinc.com.
Computer Aided Solutions, LLC. dba CAS DataLoggers is a distributor of data loggers, paperless recorders and data acquisition equipment.
We have the industry’s most complete selection of data logging equipment, with hundreds of different models from more than 18 manufacturers. With data loggers from 1 to 300 channels we can record temperature, humidity, force/strain, pressure, flow, voltage, current, resistance, vibration and other digital signals, in connection with serial (RS-232/RS-485), CAN/OBD or SDI-12 devices. We sell directly to end users and also work through a network of distributors and resellers throughout the United States, Canada, Central and South America.
8437 Mayfield Rd Unit 104
Chesterland, OH 44026
This release was published on openPR.
Permanent link to this press release:
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Workplace Environmental Monitoring Methods here
News-ID: 1451539 • Views: 320
More Releases from CAS DataLoggers
New Wireless IoT ProfiSens Series from Infinite Informatics
New ProfiSens Wireless IoT Series from Infinite Informatics CAS DataLoggers is pleased to introduce the new AERINOS ProfiSens wireless IoT series from Infinite Informatics. The series includes a family of wireless sensor nodes and a cellular Data Gateway which forwards data and sends SMS alarm messages. Using ProfiSens, you can deploy anywhere using your own IoT network. The ProfiSens series includes the following components: ADU-700: Low power data concentrator with a cellular modem ADS-101:
New NXprog Programmable I/O Module from Novus
We are pleased to announce the new DigiRail NXprog from Novus Automation. The NXprog unites the best of both worlds: the reliability and robustness of an industrial device for automation applications with the ease of programming from the Arduino community. It provides a rich mix of integrated analog and digital I/O signals, allowing DigiRail NXprog to be used as an extension of standard data logging, data acquisition, and automation systems,
New Simple Logger Series of Data Loggers from AEMC
CAS Dataloggers is pleased to announce the new Simple Logger® series of data loggers from AEMC. The SL family includes ten different small, one channel recording devices powered by two AA alkaline batteries. Models are available for recording AC voltage, DC voltage, DC current, temperature, or digital pulses and events. The simple logger series are extremely easy to configure with just a few parameters to setup – scaling, measurement units,
New DT90 Series Data Loggers from dataTaker
CAS is pleased to announce the new dataTaker DT90 Series of compact, cost-effective, low power data loggers. The new DT90 Series is designed to provide an all-in-one data collection system with an integrated modem, specifically for remote applications. The rugged enclosure and wide operating temperature range provide reliable operation in virtually any environment. There are two models available – the DT90L and DT90N. The DT90N is perfect for
More Releases for CO2
Minimising CO2 Sensor Power Consumption
All GSS sensors use a technique called non‐ dispersive infra‐red (NDIR) sensing where light is injected into the optical measurement chamber, which contains the gas of interest. The light that passes through the optical cavity is detected by the photo diode. The signal from the photo‐diode is digitised by the microcontroller and compared with a reference level stored in memory. The microcontroller can then calculate the level of CO2
Bacteria as CO2 recycling powerhouse
E. coli can live and feed on formate & methanol: Scientists from the Max Planck Institute (Germany) have reached a significant breakthrough presented in their recent Nature Chemical Biology publication. Their research for EU project eForFuel has redesigned the model biotechnological bacteria Escherichia coli (E. coli) to live and feed on methanol and formate: a possibility that serves as a stepping stone towards future endeavors aiming at recycling CO2 into various
Global Transcritical CO2 Market |
Data Bridge market Research has released a new report on Global Transcritical CO2 Market which incorporates a thorough assessment of overall Global Transcritical CO2 Market The report provides a detailed competitive analysis which includes the profiles of key market players and organizations and their working strategies. The report consists of essential data and information about the concerned Global Refinished Paint Market. For better understanding complex Global Transcritical CO2 Market data
Transcritical Co2 Systems Market is Booming Worldwide|
A latest survey on Global Transcritical Co2 Systems Market is conducted covering various organizations of the industry from different geographies to come up with 100+ page report. The study is a perfect mix of qualitative and quantitative information highlighting key market developments, challenges that industry and competition is facing along with gap analysis and new opportunity available and may trend in Transcritical Co2 Systems market. The report bridges the historical
Digital CO2, Humidity and Temperature Sensor
The EE850 duct mount sensor from E+E Elektronik combines the CO2, relative humidity (RH) and temperature (T) measurement in a single device. The sensor can be easily integrated into a bus system via the RS485 interface (Modbus RTU or BACnet MS/TP). The 3-in-1 device is dedicated for building automation as well as for demanding process control. The EE850 features the E+E dual wavelength NDIR CO2 sensing cell, which is particularly insensitive
Global Beer CO2 Regulator Market | 2018 Key Vendors: Taprite, Titan Controls, Pr …
Qyresearchreports include new market research report “Global Beer CO2 Regulator Market Research Report 2018” to its huge collection of research reports. This report on the global Beer CO2 Regulator market is based upon thorough study conducted by some of the professional and expert analysts of the industry. This report emphasizes on several factors including government regulations that are influencing growth of the market positively or negatively. The report explains challenges, opportunities,