openPR Logo
Press release

Suction of Release Agents of Hot Forming Presses

05-18-2010 12:12 PM CET | Business, Economy, Finances, Banking & Insurance

Press release from: LTA Lufttechnik GmbH

LTA – Modular large filter system AC 16002 (2nd expansion level) with blower

LTA – Modular large filter system AC 16002 (2nd expansion level) with blower

Description of project & system:
On the 1st expansion level, an LTA air filter type AC 8002 with a suction output of approx. 10,000 m³ sucks the release agent vapors of 3 presses The aerosols are separated from the contaminated air and stick to the collector surface or condense partially and are drained towards the bottom. Once per day, the offline cleaning cycle is started. For this purpose, the system is switched off and flushed with cleaning oil through nozzle fittings integrated in the filter. This pre-cleaning process takes about 35 min. After that, the system can be operated again right away.
The contaminated oil is cleaned in a centrifuge in the course of the next few hours and is then again available for the next cleaning cycle. The residues of the release agent are collected in a container and may then be disposed of.

The advantage of this system - next to the fewer service staff required - mainly lies in the unlimited usability of the cleaning oil. Only the part lost through volatilization must be replaced. In contrast to this, the water used must be replace in regular intervals in case of conventional wet cleaning systems. Besides negative environmental aspects, this also causes high consequential costs for the disposal of the water.

The solution offered by LTA for this project comprises the cleanable large filters type AC 8002 (1st expansion level, approx. 10,000 m³ effective suction output) or AC 16002 (2nd expansion level, approx. 20,000 m³ effective suction output) with attachment accessories, one spraying system for the online cleaning of the filters, one cleaning system, the piping + exhaust piping as well as the complete assembly, setting and commissioning of the turn-key system.

LTA Lufttechnik is a renowned partner for complete solutions in air technology. The company projects, builds and delivers air filter and fire protection systems for trade and industry. For over 30 years, LTA has been researching, developing and manufacturing aerosol separation products. The electrostatic separation method is eco-friendly and has continuously been further developed and improved.

Portfolio:
- Separation and cleaning of oil- and emulsion mist at machine tools
- Gathering and separation of sold-, weld- and oil smoke
- Dust- and chip suction
- Special applications, for example suction of plastic-, silicone- & releasing agent vapours
- Explosion- and fire protection at oil-cooled machine tools
- Suction at source, group suction, centralized air suction, hall air cleaning
- High-duty filter units, ventilation, heat recovery
- 24/7 Service with 15 support points in 11 countries

Available in independant or central suction plants, our equipments are used for exhaust air, air supply or hall air suction, purification. The plants are mounted as initial equipments on machines of well-known automotive manufacturers or as retrofits on already available machines of small and medium size enterprises.

Keywords: Airfilter, suction-devices, electrofilter, emulsionmist-filter, oilmist-filter, dustfilter , chipfilter, welding-fume-filter, solder-smoke-filter, safety-technics, fire-protection, machine-tools

LTA Lufttechnik GmbH
Junkerstraße 2
D - 77787 Nordrach

Tel.: +49/7838/84-245
Fax: +49/7838/84-308
Email: info@lta.de
Homepage: www.lta.de

press contact:
Philipp Fehrenbach
sales office-duty and marketing-manager
Tel.: +49/7838/84-331 (Fax: -308)
Email: philipp.fehrenbach@lta.de

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Suction of Release Agents of Hot Forming Presses here

News-ID: 131998 • Views: 802

More Releases from LTA Lufttechnik GmbH

AC 6000 CIP – compact, automatically cleaning, long life
The AC 6000-CIP is an automatically cleanable air filter of compact design. Due to its special design, the air filter AC 6000-CIP is perfectly suited for direct machine integration. The aerosol-containing exhaust air flows through a double-stage electrostatic air filter. During this process, the particles (aerosols) contained in the air are charged, diverted by an electrical field between the collector plates and precipitated. The voltage
Industrial Environmental Protection Through Energy Efficiency
In industrial applications, environmental protection often has to give way to commercial interests although both interests may be connected by means of targeted improvements in the fields of energy efficiency. This definitely makes sense not just for technical reasons but also since the number of norms and standards is rocketing upwards. LTA pursues two strategies pertaining to the suction of machine tools in close cooperation with the machine and plant manufacturers. For
Bulk order received from Opel Szentgotthard, Hungary
LTA Industrial Air Cleaning has received a bulk order from Opel Szentgotthard (Hungary), for delivery of suction systems for two crankshaft-lines, three block- and two cylinder head lines in the engine production. While doing this the scope of supply from LTA contains the building of the total devices from the projecting, delivery, building site management, installation, start-up, training and measurements of the suction devices. The project comprises 11 high-duty filters
Energy-Conserving Suction of Aerosols & Smoke at a Dörries Scharmann Machining …
The Alstom Power Service company in Berlin is active in service, maintenance & repair of turbines for power generation. At a Dörries Scharmann machining center, a lot of emulsion mist and smoke escaping through the not 100% capsuled machine cover is produced during the turning/milling processes due to the large size of the parts. It was LTA's task to prevent just that. An LTA air filter type AC 3061 was

All 5 Releases


More Releases for Modular

Raise Business with Multifamily Modular Construction Market 2018-2023: Global To …
The report on Multifamily Modular Construction study research on the revenue, opportunities prospective and constraints to the development of the market will help the new contestants in planning their business strategies. The Multifamily Modular Construction has emerging Market study works as a enhance for all business owners trying to identify the exact size of revenue in a specific geographic location. Increasing the demand on modern construction techniques, subsequently creating growth
Global Multifamily Modular Construction Market Insights, Future and Forecast til …
A newly compiled business intelligent report, titled “Global Multifamily Modular Construction Market” has been publicized to the vast archive of Market Research Hub (MRH) online repository. The study revolves around the analysis of (Multifamily Modular Construction) market, covering key industry developments and market opportunity map during the mentioned forecast period. This report further conveys quantitative & qualitative analysis on the concerned market, providing a 360 view on current and future
Focus on modular IoT standards
Deggendorf, Germany, 04 September 2018 * * * congatec – a leading vendor of standardized and customized embedded computer boards and modules – announces its cooperation with the IoT Innovation Lab at the University of Applied Sciences (HAW) Landshut, which is supported by the Bavarian Center for Digitalization (Zentrum Digitalisierung.Bayern, ZD.B) and the State Ministry for Science and Art (StMWK). The purpose of the cooperation is to prepare
SolarMax launches modular storage system solution
Ellzee, 04.05.2017. In July 2017, inverter manufacturer SolarMax starts shipping its modular complete storage system MaxStorage TP-S, developed primarily for private applications. Since the product was first presented at Intersolar Europe 2016, the company has incorporated several improvements suggested by its customers before this market launch. The three-phase system solution unites a lithium-ion storage battery, a self-learning energy management system and a seven-kilowatt SolarMax 7TP2 inverter in one housing. Thanks to
Container and Modular Buildings
By now, the need to build numerous apartments within a short space of time is evident owing to the rapid increase in the number of immigrants and refugees in Europe. Affordable and fast accommodation has always been a latent issue, but now it has become apparent and needs to be addressed. Concrete solutions are sought after by architects. Although containers offer temporary accommodation, modular buildings are intended to achieve long-term solutions.
PaintGuru offer modular kitchen services
The future is trending towards modular kitchens. Modern modular kitchens are integrated into the rest of the home such that it allows people to cook and interact with guests and family members at the same time. Modular kitchen also opens up a space for amusement. In the end, the kitchen is the heart of the home. PaintGuru provides customized & stylish modular kitchen services. Varied range of kitchen solutions can