Automatic Cleaning - New Cleaning System by LTA

The large modules starting from the type AC 800X size versions may now optionally be equipped with an innovative cleaning system. With this system, the individual filter levels are cleaned via installed nozzle fittings with appropriate full-cone nozzles. Such cleaning may only be made with the system stopped so that the logical interconnection with the production line must be taken into account. In order to minimize any carry-over of the cleaning fluid, the filter system is sealed off during the cleaning process using electrically controlled shut-off flaps.

What is so special about the new cleaning system is the fact that the cleaning process takes place without chemical additives or acqueous solutions. As cleaning agent, just a special oil is used which is recirculated in operation and reprocessed using a cleaning centrifuge (see picture). Only evaporation and carry-over losses must be compensated for.

The new cleaning system is mainly used for the new large-type series with a very short life of the filter cells, as e.g. with presses and hardening systems where the aerosol contents is low and the polluting load is high.

LTA Lufttechnik is a renowned partner for complete solutions in air technology. The company projects, builds and delivers air filter and fire protection systems for trade and industry. For over 30 years, LTA has been researching, developing and manufacturing aerosol separation products. The electrostatic separation method is eco-friendly and has continuously been further developed and improved.

Portfolio:
- Separation and cleaning of oil- and emulsion mist at machine tools
- Gathering and separation of sold-, weld- and oil smoke
- Dust- and chip suction
- Special applications, for example suction of plastic-, silicone- & releasing agent vapours
- Explosion- and fire protection at oil-cooled machine tools
- Suction at source, group suction, centralized air suction, hall air cleaning
- High-duty filter units, ventilation, heat recovery
- 24/7 Service with 15 support points in 11 countries

Available in independant or central suction plants, our equipments are used for exhaust air, air supply or hall air suction, purification. The plants are mounted as initial equipments on machines of well-known automotive manufacturers or as retrofits on already available machines of small and medium size enterprises.

Keywords: Airfilter, suction-devices, electrofilter, emulsionmist-filter, oilmist-filter, dustfilter , chipfilter, welding-fume-filter, solder-smoke-filter, safety-technics, fire-protection, machine-tools

LTA Lufttechnik GmbH
Junkerstraße 2
D - 77787 Nordrach

Tel.: +49/7838/84-245
Fax: +49/7838/84-308
Email: info@lta.de
Homepage: www.lta.de

press contact:
Philipp Fehrenbach
sales office-duty and marketing-manager
Tel.: +49/7838/84-331 (Fax: -308)
Email: philipp.fehrenbach@lta.de

This release was published on openPR.