openPR Logo

Press Releases from GOEPEL electronics Ltd. (109 total)

PXI 6161 - new Communication Controller for MOST150

GOEPEL electronic provides PXI 6161, an all-new communication controller supporting MOST150 based on the highly powerful Series 61. Using this new hardware platform, users are able to individually and flexibly configure the controller according to their individual needs. That means, GOEPEL electronic provides one-stop solutions in software and hardware supporting MOST150. Using PowerPC architecture, the host PC is relieved and valuable bandwidth for additional application is obtained, enabling complex and CPU-intensive

Automated Inspection of Bonding Pads

GOEPEL electronics’ OptiCon AOI systems can now be utilised for automated inspection of bonding pads for solder splashes, deformations and any other impurities in the micrometer range. Meeting these test tasks, an additional camera module with a resolution of 3 µm is available in the AOI systems. An adaptive illumination system and particularly developed inspection functions enable highest fault detection at extremely low false-call rate. The high-resolution camera system can be

GOEPEL electronic will exhibit leading Test Equipment at NEPCON China 2011

At this year’s NEPCON China in Shanghai, GOEPEL electronics Ltd. Asia will present its latest offerings in Multi-Dimensional Boundary Scan Instrumentation as well as chip embedded test, debug and programming tools. By visiting booth 1C10, visitors can learn how to enable straightforward control of on-chip or on-system test, debug and programming functions of any complexity, based on the IEEE 1149.1 test bus protocol – fully synchronous with other JTAG/Boundary Scan

GOEPEL electronic extends Boundary Scan Platform SCANFLEX® by scalable multifun …

At the Boundary Scan Days® 2011 in Germany, GOEPEL electronic introduces SFX/COMBO1149-(x), the first desktop controller within the framework of the Boundary Scan hardware platform SCANFLEX®. The multifunctional controller enables the combination of numerous strategies for testing, programming as well as design validation, and is ready to support new and upcoming standards such as IEEE 1149.7 and chip embedded instrumentation (IEEE P1687). Highest scalability and future reliability are ensured by

GOEPEL electronic combines Boundary Scan with analogue Opens/Shorts Tests

During the Boundary Scan Days® 2011 in Germany, GOEPEL electronic introduced the TIC02/PMU, another TAP Interface Card (TIC) within the frame of the technologically leading JTAG/Boundary Scan hardware platform SCANFLEX®. The new module enables the test of peripheral networks in particular for shorts and open connections without powering up the UUT. Using this option, dangerous solder faults can be detected before possibly leading to latent or permanent damages of the

Parallel ECU Test by powerful FlexRay Interface Module

The recently introduced communication controller series PCI/PXI 6191 from GOEPEL electronic suits perfectly for the parallel test of ECUs (electronic control units) in end-of-line test systems, and specific tasks in testing network characteristics and integration utilities. To enhance their performance, they can be upgraded by up to two dual channel FlexRay interfaces. Both FlexRay nodes are cold-start capable. In addition to starting a FlexRay cluster, the functional range includes cyclical

High-performance 3D Void Inspection with inline X-Ray System

GOEPEL electronics’ inline x-ray inspection system OptiCon X-Line 3D provides the powerful opportunity to detect voids with in various layers of large volume solder joints. In particular in the areas of power electronics for wind power, solar electricity or electro mobility the solder quality is highly important for the components’ thermal coupling, as high reliability and long service life must be guaranteed by maximum heat dissipation.

GOEPEL electronic provides new Test strategies for Altera NIOS™ Soft Processor

GOEPEL electronic has developed a special VarioTAP® IP’s in cooperation with Altera to support the chip vendor‘s FPGA embedded NIOS soft processors. The solution enables the utilisation of dynamic processor emulation tests (PET) for fault detection, diagnostics and flash programming at both board and system level. “The advancement of FPGA based systems is increasingly accompanied by the utilisation of embedded processors”, explains Steffen Koehler, Team Manager in GOEPEL electronic’s Emulation

GOEPEL electronics runs 9th UK Technology Day in 2011

Electronic and optical test issues from experts for experts GOEPEL electronics, leading vendor of JTAG/Boundary Scan equipment and Automated Inspection systems (AOI/AXI) will run its 9th UK Technology Day. This event will take place on the 5th May 2011 in Duxford. The seminars will be covering latest developments, applications and outlooks in JTAG/Boundary Scan, Functional Test and optical inspection technologies. During the Technology Day, GOEPEL electronics Ltd. and well-known partner companies such

GOEPEL electronic extends support for Boundary Scan Applications throughout the …

At the Embedded World trade show in Nuremberg/Germany, GOEPEL electronic introduces the support of multi protocol interface chips from the British company Future Technology Devices International (FTDI) for their utilisation as native Boundary Scan controllers. The single-chip solutions with USB2.0 control will be used in the recently developed PicoTAP™ Boundary Scan controllers. Additionally, they can be included in customer designs to implement onboard system-level JTAG applications. This compatibility enables the

GOEPEL electronic extends BSDL Testbench to Multi Chip Modules and 3D Chips

GOEPEL electronic, world-class vendor of JTAG/Boundary Scan solutions announces the availability of a new option in its recently introduced EDA software TAPChecker™. Multi-Chip Modules (MCM) and 3D chips are now supported, allowing testbench generation for VHDL, Verilog and STIL output formats. Users now have the opportunity to verify more complex designs with several Boundary Scan components or dies incl. interconnections by a comprehensive behaviour simulation. “The progressive integration technologies at component

Safe inline X-Ray Inspection of BGA Solder Joints

GOEPEL electronic’s 3D x-ray inspection system OptiCon X-Line 3D enables a safe quality control of BGA solder joints in the inline production process of single-sided and double-sided equipped PCBs within one test run. After image capturing from different directions and succeeding reconstruction, OptiCon X-Line 3D provides the opportunity to analyse board top and bottom sides layer by layer. Initially, each BGA solder ball is localised in x/y-direction as well as z-direction.

GOEPEL electronic and xyco technologies force Development of new Test Strategies …

GOEPEL electronic, worldwide leading provider of JTAG/Boundary Scan solutions compliant with IEEE Std. 1149.x and xyco technologies AG, ODM vendor and Intel development house with long-term experience in utilising modern x86 processors, have entered a strategic partnership within the frame of the global alliance program GATE™ (GOEPEL Associated Technical Experts). This step is intended to position GOEPEL electronic extending the existing support of the x86 architecture. For xyco technologies the

GOEPEL electronic introduces the worldwide smallest JTAG/Boundary Scan Controlle …

At “Southern Manufacturing & Electronics Exhibition” in Farnborough/UK, GOEPEL electronic introduced PicoTAP, the world’s smallest JTAG/Boundary Scan Controller with single TAP interface. The new and extremely handy solution has been designed for simple Boundary Scan test and programming tasks and for cost-critical applications throughout the entire product life cycle. If users want to upgrade their Boundary Scan applications at a later point in time, programs generated with PicoTAP are

Fast Generation of production-oriented AOI Programs

The newest version of GOEPEL electronic’s AOI system software features a special highlight. An integrated debug statistics captures AOI relevant variations in the production process and provides them for statistical evaluations. Hence, OptiCon series AOI systems enable a highly effective and convenient optimisation of generated test programs. Increased false call rates, originated in process tolerances or component variations, can be directly counter measured. The software package OptiCon PILOT 5.1

GOEPEL electronic and Accelonix agree on Distribution Partnership in the UK & Ir …

GOEPEL electronic and Accelonix UK have entered into partnership in order to satisfy the market needs and the increasing demand for Automated Optical Inspection (AOI) systems in the UK and Ireland. The partnership started on 1st February 2011 and will be officially announced during Southern Manufacturing in Farnborough/UK on 16th February 2011. Accelonix UK will provide sales services for GOEPEL electronic’s AOI systems, including stand-alone and in-line machines, such as the

GOEPEL electronic to exhibit Industry leading Test Equipment at APEX 2011

At this year’s IPC APEX Expo in Las Vegas/NV, GOEPEL electronic will present its latest offerings in Multi-Dimensional Boundary Scan Instrumentation as well as chip embedded test, debug and programming tools. By visiting booth 1476, visitors can learn how ChipVORX® technology enables straightforward control of on-chip test, debug and programming functions of any complexity, based on the IEEE 1149.1 test bus protocol – fully synchronous with other JTAG/Boundary Scan operations.

Modular PXI Solution for CAN Communication

GOEPEL electronic recently introduced PXI 6153, a modular communication controller for CAN, based on the powerful well established Series 61. The scalable architecture provides an extensive range of options for individual and flexible controller configurations and functional upgradability at a later date. The basic configuration features two separate CAN communication interfaces. Optionally, they can be extended with up to four additional ports (CAN, LIN/K-line, FlexRay). The result is a

GOEPEL electronic continues Webinar Series on Automated Optical Inspection

GOEPEL electronic will run four additional webinars about Automated Optical Inspection (AOI) issues on throughout February 2011. The events will start at 11 am EST and will last about one hour each. The first webinar on February 3rd will provide an overview of test/inspection capabilities of Automated Optical Inspection (AOI) systems in general, with a discussion of technology specific advantages and limitations of various AOI methodologies. The second webinar on February 10th

In-System Emulation Technology VarioTAP® meets TigerSHARC® DSP from Analog Dev …

GOEPEL electronic, worldwide leading vendor of JTAG/Boundary Scan solutions compliant to IEEE Std.1149.x, has developed a dedicated model library for the TigerSHARC® series of Digital Signal Processors (DSP) from Analog Devices™ to support the innovative emulation technology VarioTAP®. VarioTAP’s functional range goes from programming of external Flash devices, interlaced bus emulation tests (BET) up to emulation tests on system level. It is based on processor specific library models in software

Boundary Scan Test Vector Migration into SPEA 3030 Board Testers

In cooperation with its German GATE™ program partner TAP (Tietjen Automatisierte Prueftechnik) GOEPEL electronic has developed a software tool that converts test vectors, generated in SYSTEM CASCON™, into executable test pattern of the SPEA 3030 In-Cicruit tester (ICT). The new method converts the JTAG bus’ serial vectors as well as the parallel I/O vectors to the board test system’s pin electronics. The utilisation of the SPEA 3030 test channels

New Boundary Scan Relays Card for Integration into ICT Adapter Systems

GOEPEL electronic introduces a special relay card for integration into fixture adapter systems for In-Circuit Testers (ICT). The card is named CION ICT Adapter, and was specifically developed to meet customer requirements for Boundary Scan integration into ICT adapter systems. The module enables the switching of 32 test channels from the ICT to GOEPEL electronic’s JTAG/Boundary Scan hardware platform SCANFLEX®. In quiescent state the ATE channels are connected to the ICT

Vector Link connects Agilent In-Circuit Tester with JTAG/Boundary Scan Software …

GOEPEL electronic, world-class vendor of JTAG/Boundary Scan solutions compliant with IEEE Std1149.x, introduces a special link software to migrate test vectors to Agilent In-Circuit Testers (ICT). The vector link was developed in cooperation with the GATE™ Program member WG-Test and supports the transfer of hybrid Boundary Scan test sets to the parallel pin electronics at parallel pin level fault diagnosis. „A direct takeover of test vectors, which have already been

New AOI System with integrated 3D Solder Paste Inspection

The world of Automated Optical Inspection has been enriched by a new system. A new version of GOEPEL electronic’s well-proven inline AOI system OptiCon AdvancedLine, unique in terms of a reworked design and the opportunity to inspect even larger PCBs. Special emphasis was placed on the opportunity to increase the inspection area as well as an easy access to the system components during maintenance works. A solid basic frame, clear system

New Generation EDA Software improves Testbench Quality for BSDL Verification

Austin, TX - At the 2010 International Test Conference (ITC), GOEPEL electronic, a global leader in JTAG/Boundary Scan solutions, introduces TAP Checker™ a new generation EDA software tool for verification of BSDL (Boundary Scan Description Language) files and validation of JTAG implementations in integrated circuits. The innovative tool suite enables the automatic generation of simulation vectors and test patterns for chip-level validation and verification of IEEE 1149.1 and IEEE

FPGA embedded ChipVORX® IP enables ultra fast Flash Programming

At the International Test Conference (ITC) GOEPEL electronic, world-class vendor of JTAG/Boundary Scan solutions compliant with IEEE Std.1149.x announces the development of special ChipVORX® model library series for FPGA accelerated in-system programming (ISP) of Flash components. The ChipVORX® models developed in cooperation with the Tallinn/Estland based Company Testonica, within the frame of the GATE alliance are structured modularly as intelligent IP. They enable the ultra fast in-system programming of every

Revolutionary IP Technology enhances Utilisation of chip-embedded Test and Debug …

Austin, TX - At the 2010 International Test Conference (ITC), GOEPEL electronic introduces ChipVORX®, an entirely new in-system technology for the configuration and control of chip embedded test, debug, and programming functions. In its core this powerful solution is based on the utilization of a new communication interface in the software platform SYSTEM CASCON™, combined with special function libraries (ChipVORX® models) structured as intelligent IP. As a result, ChipVORX® enables

Net2Run - revolutionary Software Suite for Bus Communication

GOEPEL electronic introduces Net2Run, an innovative powerful software suite for the comfortable configuration and data administration for utilising the communication controller series 61xx for CAN, LIN and FlexRay. The user’s main benefit is the continuous signal based communication via a C-API or a generic user interface. In addition to the automatic generation of output messages from imported databases in FIBEX, dbc or ldf formats, the extended rest bus simulation provides

GOEPEL electronics and Geotest to host Seminars in the Baltimore and Washington …

Combining Design for Test Analysis Methods with Boundary Scan and Functional Test – Advantages and Techniques GOEPEL electronics LLC and Geotest will run free seminars and workshops that review the most recent advances in JTAG/Boundary Scan technology and Functional Test strategies. The events will take place in Linthicum, MD, and Rockville, MD, on October 27th and 28th, respectively. Attendees will learn how JTAG/Boundary Scan test methods can be used for not only

Boundary Scan Platform SCANFLEX® enables Applications with electrical Isolation

GOEPEL electronic recently introduced TEM/ISO, another new component within the frame of the revolutionary Boundary Scan hardware platform SCANFLEX®. The newly developed TAP Extension Modules (TEM) has been designed particularly for applications in critical signal environments and enables a complete galvanic isolation of the TAP transceiver from the target unit under test. “The new TEM/ISO module guarantees our TAP interfaces’ stability in critical signal environments, whereby signal transmission speed is

In-System Emulation Technology VarioTAP® powers Energy Micro® EFM32 Gecko MCU …

GÖPEL electronic, leading vendor of JTAG/Boundary Scan solutions compliant to IEEE1149.x announces the extension of the innovative emulation technology VarioTAP® for the support of the ARM’s Serial Wire Debug (SWD) interfaces. VarioTAP’s functional range includes on-chip programming up to emulation tests at system level, and is based on processor specific library models in the form of software IP. The new VarioTAP models’ first implementation covers the ultra low energy MCU

Free Board Analysis - GOEPEL electronics Ltd. offers free service in the UK

GOEPEL electronics Ltd. offers a free board analysis for Design for Testability (DfT) and opportunities to increase test coverage with Boundary Scan. Application engineers of the Cambridge based Company will provide an analysis of Boundary Scan chain and ICs, project analysis focusing on resolving test issues and optimising test coverage. As a result, there will be recommendations how to increase test coverage, reduce test points and increase the performance of

GOEPEL electronics will run next Technology Day in UK

Electronics Design, Manufacture and Test issues in the Centre of Interest GOEPEL electronics, vendor of JTAG/Boundary Scan equipment and Automated Inspection systems (AOI/AXI) will run another Technology Day in the UK in 2010. The event will take place on the 5th October 2010 at Uttoxeter Racecourse. The seminar will be covering the latest developments, applications and outlooks in JTAG/Boundary Scan, Functional Test, optical inspection technologies and automotive test solutions. During the Technology

Cooperation between GOEPEL electronic and IPextreme accelerates Support of IEEE1 …

GOEPEL electronic, globally leading vendor of JTAG/Boundary Scan solutions compliant with IEEE Standard 1149.x and IPextreme, a supplier of high-quality IP (Intellectual Property) for System-on-Chip (SoC) Design worldwide, have verified new instrumentations for the recently adopted debug and test standard IEEE 1149.7 within the frame work of a long-term cooperation. As a result, the total compatibility of GOEPEL electronic’s JTAG/Boundary Scan hardware platform SCANFLEX® with the IPextreme’s IEEE 1149.7 JTAG

GOEPEL electronic appoints Datest Corp. as next Center of Expertise

GOEPEL electronic has appointed Datest Corp. as Center of Expertise (COE) for the service and support of the company’s worldwide unrivalled JTAG/Boundary Scan technology compliant with IEEE Std. 1149.x. Located in Fremont, CA, Datest offers comprehensive PCBA test, inspection and rework services. The new strategic alliance expands the resources available for local application support and test program development service for GOEPEL electronic’s JTAG/Boundary Scan products in the North American market. The

In-System Emulation Technology VarioTAP® extended to Freescale ColdFire Archite …

GOEPEL electronic, worldwide leading vendor of JTAG/Boundary Scan solutions compliant to IEEE Std.1149.x, has developed a dedicated model library for the Freescale MCF5225x micro controller with ColdFire® V2 architecture to support the innovative emulation technology VarioTAP®. The libraries, described as VarioTAP® models, are structured modularly as intelligent IP and enable a complete fusion of Boundary Scan test and JTAG emulation by employing the BDM debug interface. VarioTAP® covers various functions

In-System Emulation Technology VarioTAP® supports ARM11® Core

GOEPEL electronic, worldwide leading vendor of JTAG/Boundary Scan solutions compliant to IEEE1149.x has developed a dedicated model library for processors with ARM11® architecture that supports the innovative emulation technology VarioTAP®. The libraries, described as VarioTAP® models, are structured modularly as intelligent IP and enable a complete fusion of Boundary Scan test and JTAG emulation. Employing this technology, embedded or external Flash can be in-system programmed via the native processor function. Furthermore,

GOEPEL electronic expands GATE program in China

GOEPEL electronic, worldwide leading vendor of JTAG/Boundary Scan solutions compliant with IEEE1149.x announces the extended incorporation of Vayo Technology Co., Ltd into the global alliance program GATE™ (GOEPEL Associated Technical Experts). The focus of the cooperation is the development and practical implementation of new products and modules based on JTAG/Boundary Scan instrumentation as well as enhancements in the integration of the leading JTAG/Boundary Scan solution SCANFLEX® related to SYSTEM CASCON™ as

GENESIS becomes GOEPEL electronic’s new GATE Partner in Singapore

GOEPEL electronic, worldwide leading vendor of JTAG/Boundary Scan solutions compliant with IEEE1149.x announces the extended incorporation of Genesis Test Integration PTE Ltd (GTI) into the global alliance program GATE™ (GOEPEL Associated Technical Experts). The focus of the cooperation is the integration of the leading JTAG/Boundary Scan solutions SCANFLEX® related to SYSTEM CASCON™ as well as SCANBOOSTER™ technology in their functional test fixtures. Thus, the customer will get a total test and

Boundary Scan Software Platform SYSTEM CASCON™ provides Test Vector Link for I …

GOEPEL electronic, world-class vendor of JTAG/Boundary Scan solutions compliant with IEEE Std.1149.x introduces a new test vector interface as a new extension of its software platform SYSTEM CASCON™. The newly developed vector link is based on IEEE1450 – Standard Test Interface Language (STIL) – and enables the seamless coupling during test pattern export, in particular to chip testers. “A whole series of chip manufactures already use our system to validate prototypes

In-System Emulation Technology VarioTAP® supports Analog Micro Controller from …

GOEPEL electronic, world-class vendor of JTAG/Boundary Scan solutions announces the development of model libraries for Precision Analog ADµC706x micro controllers from Analog Devices for support of GOEPEL electronic’s innovative emulation technology VarioTAP®. VarioTAP® model libraries are structured modular with IP (Intellectual Property) functions and enable a complete fusion of Boundary Scan test and JTAG Emulation. On this basis on-chip Flash can be in-system programmed. Additionally, VarioTAP® supports interlaced Bus Emulation Tests

GOEPEL electronic expands GATE Partner Program in Asia

GOEPEL electronic, worldwide leading vendor of JTAG/Boundary Scan solutions compliant with IEEE1149.x announces the extended incorporation of Everett Charles Technologies (ECT) into the global alliance program GATE™ (GOEPEL Associated Technical Experts). The focus of the cooperation is the development and practical implementation of new products and modules based on JTAG/Boundary Scan instrumentation as well as enhancements in the integration of JTAG/Boundary Scan products in existing test systems supported by Everett Charles

GOEPEL electronics, Geotest and Aster Technologies to host Seminars on Design fo …

Focus on combining Design for Test Analysis Methods with Boundary Scan and Functional Test in Upstate New York, Metro New Jersey and New York GOEPEL electronics LLC, Geotest, and Aster Technologies will run free seminars and workshops that review the most recent advances in Boundary Scan technology and Functional Test strategies. The events will take place in Rochester, NY, Plainview, NY and Fairfield, NJ on June 22nd through 24th. Attendees will learn

New Boundary Scan Integration Solution into Agilent In-Circuit Tester

GOEPEL electronic and Agilent Technologies announce Availability of UCM3070 Boundary Scan plug-on Module for the Agilent Utility Card - GOEPEL electronic GmbH and Agilent Technologies Inc. (NYSE: A) announced the release of the UCM3070 Boundary Scan plug-on module for the Agilent Utility Card of the Agilent Medalist i3070 Series 5 In-Circuit tester. It is the first Boundary Scan solution for the Agilent Utility Card worldwide and a part of a

New low cost Boundary Scan Controller for PCI Express

At the SMT/Hybrid/Packaging trade show GOEPEL electronic, world-class vendor of JTAG/Boundary Scan solutions compliant with IEEE Std. 1149.x, introduced the SCANBOOSTER/PCIe-DT, a new high-performance, and low cost Boundary Scan controller, as an addition to the company’s SCANBOOSTER™ product line. The new Boundary Scan controller is compliant with the PCI Express bus specification and supports JTAG/Boundary Scan tests, VarioTAP® emulation tests, in-system programming (ISP) for PLD and FPGA, as well as in-system

Functional Extensions in GOEPEL electronic’s AOI/AXI Systems

At this year’s SMT/Hybrid/Packaging in Nuremberg/Germany, GOEPEL electronic once again introduces new functions in its AOI/AXI systems for quality assurance in electronics manufacturing. The OptiCon series in-line systems newly feature the opportunity of a 3D solder paste inspection and AOI, combined in one system. The inspection machines can efficiently be utilised for both test tasks – integrated in a production line or offline as so called “isle solution”. The combination of

Boundary Scan Software Platform SYSTEM CASCON™ automatically generates Project …

At the trade show SMT/Hybrid/Packaging GOEPEL electronic, world-class vendor of JTAG/Boundary Scan solutions compliant with IEEE Std.1149.x introduced a special documentation generator within the frame of the Boundary Scan software platform SYSTEM CASCON™. The newly developed tool named CASCON ProjectPublisher™ enables a full automation in generating complete project documentations and involves all relevant design and application information. “Based on the new ProjectPublisher™ our system software is the very first to

New Boundary Scan fixture enables structural test of AMC modules for ATCA system …

Cambridge/Birmingham UK – At the National Electronics Week (NEW) GOEPEL electronic, worldwide leading vendor of JTAG/Boundary Scan solutions compliant with IEEE1149.x, announces the launch of CION Fixture™ /AMC, a new interface test fixture on the basis of the popular CION Fixture™ family. The new low-cost fixture is compatible with the standard of Advanced Mezzanin Cards (AMC) for ATCA systems (Advanced Telecommunication Computing Architecture) and comes with a preset AMC slot, in

Boundary Scan Platform SCANFLEX® accesses new Debug Interfaces for Processor Em …

GOEPEL electronic introduces TIC020, another TAP Interface Card (TIC) within the frame of the JTAG/Boundary Scan hardware platform SCANFLEX®. The new TIC module features a programmable multi bus interface, which enables a nearly unlimited compatibility to numerous standardised and proprietary test and debug protocols and, consequently, several thousand micro controllers. “Our new TIC hardware enables a completely new quality in the fusion of Boundary Scan and processor emulation. Now we can support

In-System Emulation Technology VarioTAP® extended to non JTAG Debug Interfaces …

During its „Boundary Scan Days® Germany“, GOEPEL electronic introduced the further development of the innovative emulation technology VarioTAP® for the support of non JTAG debug interfaces. The new features enable the broad coverage of various proprietary debug architectures of different chip manufacturers without utilising processor specific pods. The first interfaces to be supported are the so called BDM interface (Background Debug Mode) and the MCU of the Freescale MPC5xx series with

Go To Page:    1 2 3 4 5 6 7 8 9 10