Room Sensors Become Digital
The EE10 room sensors family includes models for humidity and temperature measurement as well as for temperature measurement only. Featuring analogue (current/voltage) or digital (Modbus RTU / BACnet) outputs, EE10 is particularly versatile.
Digital EE10 devices calculate additional physical quantities such as absolute humidity, mixing ratio, enthalpy, frost point temperature and water vapor partial pressure. The analogue models are optionally available with a passive temperature output.
The stylish, functional enclosure offers significant advantages during installation. The back cover with the screw terminals can be mounted and wired first. At a later moment, the front cover containing all measuring electronics simply snaps onto the back cover. This way the electronics is never exposed to construction site pollution. The active part of the device can also be replaced in just a few seconds without tools, while the wiring remains intact.
The EE10 sensors are available in two sizes (EU and US standard) and in three different colours. The measured data can be read directly on the optional LC display.
E+E Elektronik develops and manufactures sensors and transmitters for humidity, temperature, dewpoint, moisture in oil, air velocity, flow and CO2. Data loggers, hand-held measuring devices and calibration systems complete the comprehensive product portfolio of the Austrian sensor specialist. The main applications for E+E products lie in HVAC, building automation, industrial process control and the automotive industry. A certified quality management system according to ISO 9001 and ISO/TS 16949 ensures the highest quality standards. E+E Elektronik has a worldwide dealership network and representative offices in Germany, France, Italy, Korea, China and the United States. The accredited E+E calibration laboratory (OEKD) has been commissioned by the Austrian Federal Office for Metrology (BEV) to provide the national standards for humidity and air velocity.
E+E Elektronik Ges.m.b.H
T: +43 (0) 7235 605-0
F: +43 (0) 7235 605-8
Mr. Johannes Fraundorfer
T: +43 (0)7235 605-217
This release was published on openPR.
Permanent link to this press release:
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Room Sensors Become Digital here
News-ID: 986585 • Views: 266
More Releases from E+E Elektronik Ges.m.b.H.
4 in 1 Probe Measures CO2, Humidity, Temperature and Pressure
The EE872 from E+E Elektronik measures the CO2 concentration up to 5 % (50 000 ppm) as well as relative humidity, temperature and ambient pressure. Additionally, the 4 in 1 probe also calculates the dew point temperature. It is perfectly suited for use in harsh and aggressive environment, such as agricultural applications. The active pressure and temperature compensation ensures a very high CO2 measuring accuracy. A heated probe version is
New CO2 Sensor for Railway Applications
The EE8915 from E+E Elektronik meets all relevant railway standards for reliable CO2 measurement in railway vehicles, e.g. in the passenger compartment or driver's cab. On-board sensors ensure high CO2 measurement accuracy independently of temperature, altitude or weather conditions. Due to excellent measurement performance in harsh environment, the sensor is also suitable for demanding process and climate control. Long-Term Stable CO2 Measurement The E+E NDIR dual wavelength infrared measuring principle is particularly
Digital CO2, Humidity and Temperature Sensor
The EE850 duct mount sensor from E+E Elektronik combines the CO2, relative humidity (RH) and temperature (T) measurement in a single device. The sensor can be easily integrated into a bus system via the RS485 interface (Modbus RTU or BACnet MS/TP). The 3-in-1 device is dedicated for building automation as well as for demanding process control. The EE850 features the E+E dual wavelength NDIR CO2 sensing cell, which is particularly insensitive
Humidity Transmitters with Stainless Steel Enclosure
The high-end EE310 and EE360 industrial transmitters from E+E Elektronik are now available with stainless steel or with polycarbonate enclosure. The EE310 humidity and temperature transmitter is dedicated for demanding industrial processes control. The EE360 measures the moisture content of industrial oils and thus enables predictive maintenance of machines and plants. Display with Data Logger Function Both devices feature an optional 3.5" TFT color display, which offers an optimal view
More Releases for EE10
Data Virtualization Market 2019 Global Key Leaders: IBM Corporation, Cisco syste …
Data Virtualization Market Synopsis: The detailed report published by Market Research Future (MRFR) projects that the global data virtualization market is marked to exhibit remarkable expansion at a CAGR of 15% during the forecast period of 2017-2023. The global data virtualization market is also anticipated to reach the valuation of USD 278 Bn by the end of the review period. Increased adoption of technologically advanced devices that provide internet connectivity, high
CO2, T and RH room transmitter with new housing colours
The EE800 room transmitter from E+E Elektronik combines CO2, temperature (T) and relative humidity (RH) measurement in a single device. It is ideal for use in demand-controlled ventilation and indoor climate control. In addition to the standard housing colour “signal white”, the EE800 is now also available in "anthracite grey" and "white aluminum", which are the most common colours of light switches and power sockets. Besides modern design and new housing