openPR Logo
Press release

CO2, T and RH room transmitter with new housing colours

12-02-2016 09:18 AM CET | Industry, Real Estate & Construction

Press release from: E+E Elektronik Ges.m.b.H.

EE800 room transmitter from E+E Elektronik

EE800 room transmitter from E+E Elektronik

The EE800 room transmitter from E+E Elektronik combines CO2, temperature (T) and relative humidity (RH) measurement in a single device. It is ideal for use in demand-controlled ventilation and indoor climate control. In addition to the standard housing colour “signal white”, the EE800 is now also available in "anthracite grey" and "white aluminum", which are the most common colours of light switches and power sockets.

Besides modern design and new housing colours, the EE800 impresses by its technical features. The dual wavelength NDIR CO2 measuring principle with auto-calibration is highly insensitive to contamination, compensates for ageing effects and leads to outstanding long-term stability. Additionally, the multi-point CO2 and temperature factory adjustment ensures excellent CO2 measurement accuracy across the entire temperature working range.

Out of the RH and T measured values, EE800 calculates the dew point temperature. The versions with Modbus RTU or BACnet MS/TP interface calculate also further physical quantities, such as absolute humidity, mixing ratio or specific enthalpy. The digital interfaces allow for easy integration into a modern bus system for building automation.
The EE800 versions with analogue outputs (current or voltage) also feature an optional passive temperature output.
An optional USB configuration adapter facilitates easy setup and adjustment of the device.

Further room transmitters:
In addition to the EE800, the E+E portfolio also includes room transmitters for combined RH and T measurement (EE10), T measurement only (EE10-T) and a CO2 switch (EE80).

All E+E room transmitters are available in the new colours and with optional display. The innovative snap-on enclosure facilitates mounting of the device, which saves time and minimizes installation costs. The enclosure is available in two sizes corresponding to the EU and US standards.

About E+E Elektronik:
E+E Elektronik develops and manufactures sensors and transmitters for humidity, temperature, dewpoint, moisture in oil, air velocity, flow and CO2. Data loggers, hand-held measuring devices and calibration systems complete the comprehensive product portfolio of the Austrian sensor specialist. The main applications for E+E products lie in HVAC, building automation, industrial process control and the automotive industry. A certified quality management system according to ISO 9001 and ISO/TS 16949 ensures the highest quality standards. E+E Elektronik has a worldwide dealership network and representative offices in Germany, France, Italy, Korea, China and the United States. The accredited E+E calibration laboratory (OEKD) has been commissioned by the Austrian Federal Office for Metrology (BEV) to provide the national standards for humidity and air velocity.

E+E Elektronik Ges.m.b.H.
Mr. Johannes Fraundorfer
Langwiesen 7
A-4209 Engerwitzdorf
0043 7235 605 0
pr@epluse.at
www.epluse.com

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release CO2, T and RH room transmitter with new housing colours here

News-ID: 389904 • Views: 658

More Releases from E+E Elektronik Ges.m.b.H.

Miniature Sensor Module Measures CO2, Temperature and Pressure
The new EE895 sensor module from E+E Elektronik measures CO2, temperature and ambient pressure. The small 3-in-1 module is an ideal choice for measuring instruments used for ventilation and climate control, in building automation or for process control. Due to its low power consumption, the module is also suitable for battery-operated devices such as hand-held meters, data loggers or wireless transmitters. The temperature and pressure compensation ensures high CO2 measurement
Humidity and Temperature Probe with Digital Interface
The EE072 by E+E Elektronik is a highly accurate humidity and temperature probe for demanding process and climate control tasks. The probe can be used for example in agriculture and livestock farming, the food and pharmaceutical industries or in clean rooms. The digital interface with the Modbus RTU or CANopen communication protocol facilitates the design-in of the EE072. Versatile in Use and Highly Accurate A wide temperature range of -40 to 80
4 in 1 Probe Measures CO2, Humidity, Temperature and Pressure
The EE872 from E+E Elektronik measures the CO2 concentration up to 5 % (50 000 ppm) as well as relative humidity, temperature and ambient pressure. Additionally, the 4 in 1 probe also calculates the dew point temperature. It is perfectly suited for use in harsh and aggressive environment, such as agricultural applications. The active pressure and temperature compensation ensures a very high CO2 measuring accuracy. A heated probe version is
New CO2 Sensor for Railway Applications
The EE8915 from E+E Elektronik meets all relevant railway standards for reliable CO2 measurement in railway vehicles, e.g. in the passenger compartment or driver's cab. On-board sensors ensure high CO2 measurement accuracy independently of temperature, altitude or weather conditions. Due to excellent measurement performance in harsh environment, the sensor is also suitable for demanding process and climate control. Long-Term Stable CO2 Measurement The E+E NDIR dual wavelength infrared measuring principle is particularly

All 5 Releases