Challenge Europe Rivets make assembly quicker and cheaper

Rivets from Challenge Europe offer a quick, simple, reliable and low cost ex-stock way to join sections of material – either similar – metal to metal, or dissimilar – metal to plastic. Blind rivets are stocked in depth by the expert team at Challenge Europe who aim to partner manufacturers through the design/development/production cycle with standard or custom specifications.

Many rivets are available with a choice of head forms from the standard dome head to large, extra-large and countersunk. A full range of setting tooling is available, including simple handtools for smaller volume work, and sophisticated hydropneumatic equipment to meet intensive production line working. For example, Blind Rivet Nuts which offer the facility to provide an internal thread to the work piece and are set in a similar way to that of a blind rivet. Rivet nuts are available in a comprehensive range of body and head types with material options of steel, stainless steel and aluminium. They provide advantages of being able to be easily set in thin material, but have the same properties as a tapped thread in fuller thickness material.

Blind rivets are offered in a range of fixings designed to allow the riveting operation to be conducted from one side of the workpiece. Variable in type, according to the application, some typical examples are listed below:

Open End – Provides strong, low cost fastenings ideal for a wide range of applications within the general engineering industry. Available in aluminium, steel, stainless steel, monel and copper alloy.

Closed (Sealed) End – Specifically designed to provide a waterproof seal after the rivet has been set. Available in aluminium, steel, stainless steel, monel and copper alloy.

Multigrip – Designed to clamp a wide range of material thicknesses as well as having excellent filling characteristics where hole form proves inconsistent. Additional benefit of allowing reduced rivet inventory. Traditionally available in aluminium, but steel and stainless steel versions have been recently introduced.
Structural – Designed to provide high tensile and shear strengths for more demanding applications. Available in steel and aluminium.

Grooved – Used in conjunction with fibrous materials (e.g. wood) where upon setting the body of the rivet expands and the grooves bite into the material. Available in aluminium.

Load Spreading – Suitable for soft or brittle materials where upon setting the rivet body folds back into segments preventing produce damage. Available in aluminium.

Peel – Similar to the Load Spreading rivet in design and application, excepting that the rivet body splits open into a ‘petal’ arrangement upon setting. Available in aluminium.

Further information on Challenge Europe rivets can be found at www.challenge-europe.co.uk/rivets-pins/.

Challenge (Europe) Ltd is an ISO 9001 stockist and distributor of threaded fasteners, with an emphasis on supplying manufacturing companies located within the UK with specialist standard or custom components.

This includes extensive stock and application specific supply capability for screws and bolts of all types including machine screws, self-drilling screws, hammer drive screws, wood screws, self-tapping, thread-forming screws and sems. Bolts include Hex head, construction floor anchors, coach bolts and studding. They have an extensive stock of socket head screws as well as nuts, cage nuts, rivet nuts, Tee nuts, weld nuts, u nuts, wing nuts, barb nuts and combi nuts. Washers are stocked in depth from flat and shake proof to mudguard, copper grip and terminal cup types, to crinkle washers, sealing and Bellville washers, spring and cup washers, as well as O rings. Rivets include blind and tubular, alongside split cotter pins, dowel/groove pins, weld studs, tension pins, self-clinching and brass threaded inserts.

Challenge also carry useful ancillary products such as grommets, plugs and screw caps, carrying handles, valve knobs, cable ties and the range of Action Can lubricants, sprays and aerosols.

Challenge operates Project Manufacturing Partnerships for sub-contract manufacture, sub-assembly and logistic supply. These have developed over many years from simple kitting processes to cover supply chain management including co-operative product development, tooling control and global sourcing through to stock monitoring.

Challenge (Europe) Ltd
Shuttleworth Road
Bedford
MK41 0EP
Tel: 01234 346242
email: sales@challenge-europe.co.uk
www.challenge-europe.co.uk
Press contact: Kevin Moorcroft

This release was published on openPR.