Press release
Sheet Molding Compound and Bulk Molding Compound Market 2018 Global Key Players: Core Molding Technologies, Continental Structural Plastics, Showa Denko K.K., Changzhou Runxia Fiberglass Products
Global Sheet Molding Compound and Bulk Molding Compound Market Information by Type (Glass Fiber and Carbon Fiber) by Application (Transportation, Electrical and Construction) and Region - Forecast to 2021
Sheet Molding Compound (SMC) is a fiber protected polymer matrix composite material which offers a range of beneficial properties that are demanded by various modern applications. Bulk Molding Compound (BMC) is any combination of cut glass components and resin in the form of a bulk pre-preg. Bulk molding compound is mainly suitable either for compression or injection molding. Transportation, electrical, construction and other applications such as aerospace, automotive, marine and consumer industries are increasing using sheet molding compound to take better advantage of its performance. Glass fiber is expected to hold the maximum market share of USD 589.5 million by 2021, growing at a CAGR of 6.7%. The global sheet molding compound and bulk molding compound market is expected to and reach USD 3,531.1 Million at the end of the forecasted period and is expected to show a staggering growth at CAGR of 6.5% from 2016 to 2021.
Request a Sample Report @ https://www.marketresearchfuture.com/sample_request/1671
Key Players
The key players of global Sheet Molding Compound and Bulk Molding Compound Market report include- IDI Composite International, Citadel Plastics Holding Inc., Menzolit GmbH, Polynt S.P.A, Core Molding Technologies Inc., Continental Structural Plastics Inc., Showa Denko K.K., Changzhou Runxia Fiberglass Products Co., Ltd., and Royal Tencate.
Regional Analysis of Global Sheet Molding Compound and Bulk Molding Compound Market
APAC will expand at a CAGR 7.2% over the forecast period with largest market size of USD 1,885.2 million by 2021. The share is attributed to the growing transportation and electrical & electronics industries in this region. China stands on the top most position as producers and consumer which account the total of around 50% of the global market.
However Europe is expected to acquire a market share of USD 923.7 million and will expand at a CAGR 4.9% by 2021. It is followed by U.S.
Browse Complete Report @ https://www.marketresearchfuture.com/reports/sheet-molding-compound-market-1671
Target Audience
Manufactures
Raw material Suppliers
Aftermarket suppliers
Research Institute / Education Institute
Potential Investors
Key executive (CEO and COO) and strategy growth manager
About Market Research Future:
At Market Research Future (MRFR), we enable our customers to unravel the complexity of various industries through our Cooked Research Report (CRR), Half-Cooked Research Reports (HCRR), Raw Research Reports (3R), Continuous-Feed Research (CFR), and Market Research & Consulting Services.
MRFR team have supreme objective to provide the optimum quality market research and intelligence services to our clients. Our market research studies by products, services, technologies, applications, end users, and market players for global, regional, and country level market segments, enable our clients to see more, know more, and do more, which help to answer all their most important questions.
Contact:
Market Research Future
+1 646 845 9312
Email: sales@marketresearchfuture.com
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Sheet Molding Compound and Bulk Molding Compound Market 2018 Global Key Players: Core Molding Technologies, Continental Structural Plastics, Showa Denko K.K., Changzhou Runxia Fiberglass Products here
News-ID: 960649 • Views: …
More Releases from Market Research Future - MRFR
Water Based Resins Market Poised to Growth USD 9857.98 Million by 2035 with Thri …
Water-based resins are polymer materials in which water is used as the primary solvent or dispersion medium instead of organic solvents. These resins are widely used in coatings, adhesives, inks, sealants, construction materials, and textiles due to their low volatile organic compound (VOC) emissions and improved environmental profile. Common types include acrylic, polyurethane, epoxy, alkyd, and polyester water-based resins.
The global water-based resins market has gained strong momentum in recent years,…
Bunker Fuel Market Set to Grow at an Impressive CAGR of 4.3% Through 2035 | USD …
Bunker fuel, also known as marine fuel, is a type of fuel oil used to power ships and marine vessels. It is a critical component of global maritime transportation, supporting international trade, commercial shipping, fishing vessels, and naval operations. Bunker fuel is typically derived from crude oil refining and is supplied in different grades depending on engine requirements, environmental regulations, and operational needs.
The bunker fuel market plays a vital role…
Heavy Duty Telehandler Market Projected to Hit USD 13.8 Billion by 2035, at a Ex …
Heavy duty telehandlers are versatile material-handling machines widely used across construction, mining, agriculture, ports, and industrial sectors. Equipped with a telescopic boom, these machines can lift, move, and place heavy loads at significant heights and distances, combining the functionality of a crane, forklift, and loader. Heavy duty telehandlers are specifically designed to handle higher load capacities, operate in rugged environments, and support demanding applications where standard telehandlers may not be…
Prefabricated Buildings Market Size, Growth Drivers and Forecast 2035 | At a Thr …
Prefabricated buildings are structures manufactured off-site in a controlled factory environment and then transported to the construction site for assembly. Unlike traditional construction methods, prefabrication allows building components such as walls, floors, roofs, and entire modules to be produced simultaneously with site preparation. This approach significantly reduces construction time, labor dependency, material waste, and overall project costs.
The prefabricated buildings market has gained strong momentum globally due to rapid urbanization, rising…
More Releases for Molding
Differences Between Flaskless Molding Machines and Flask Molding Machines
Flaskless molding machines [https://www.junengmachinery.com/servo-molding-machine-products/] and flask molding machines are two primary types of equipment used in foundry production for making sand molds (castings molds). Their core distinction lies in whether they use a flask to contain and support the molding sand. This fundamental difference leads to significant variations in their processes, efficiency, cost, and applications.
Key Differences
Core Concept:
Flask Molding Machine: Requires the use of a flask during mold making. A flask…
LSR Molding: Understanding Silicone Rubber Injection Molding
Liquid Silicone Rubber (LSR) molding is a specialized manufacturing process used to create flexible, durable, and heat-resistant silicone parts. This technique is widely used across industries such as automotive, medical, electronics, and consumer goods. Its ability to produce high-quality parts with precision and consistency makes it a top choice for many manufacturers.
• What Is LSR Molding?
LSR molding, or Liquid Silicone Rubber injection molding (https://www.newtopcustomsilicone.com/capabilities/liquid-silicone-injection-molding/), involves injecting two-component platinum-cured silicone into…
HDPE Blow Molding and Injection Molding Containers Market
Persistence Market Research (PMR) has published a new research report on HDPE blow molding and injection molding containers. The report has been titled "HDPE Blow Molding and Injection Molding Containers Market: Global Industry Analysis 2013-2017 and Forecast 2018-2026." The proliferating demand for HDPE blow molding and injection molding containers is largely from the beverage, chemical & petrochemicals, and pharmaceuticals industries, owing to the barrier properties of HDPE and convenience in…
Sheet Molding Compound and Bulk Molding Compound Market - Growth Prophesy 2025 | …
Global Sheet Molding Compound and Bulk Molding Compound Market: Snapshot
The global market for sheet molding compound and bulk molding compound is expected to advance with the launch of superior quality, lightweight, and more durable bulk molding and sheet molding compounds. By virtue of their higher line throughputs and lower production costs, these compounds are increasingly preferred by several leading manufacturers. As an augmenting number of advanced automobiles and luxury brands…
HDPE Blow Molding and Injection Molding Containers Market 2026
Due to its intrinsic physical and mechanical properties, high density polyethylene (HDPE) is highly used as packaging materials in different industries including food, beverages, pharmaceuticals, cosmetics, homecare, chemicals, and petrochemicals. Urbanization, changing consumer preferences, and expanding middle class have significantly contributed to the rising demand for consumer goods. Increased demand for consumer goods has, in turn, revolutionized the packaging industry, especially plastic packaging.
Polyethylene is most commonly used in the packaging…
Sheet Molding Compound and Bulk Molding Compound Market 2017-2025 : Polynt S.P.A …
Global Sheet Molding Compound and Bulk Molding Compound Market: Snapshot
The global market for sheet molding compound and bulk molding compound is expected to advance with the launch of superior quality, lightweight, and more durable bulk molding and sheet molding compounds. By virtue of their higher line throughputs and lower production costs, these compounds are increasingly preferred by several leading manufacturers. As an augmenting number of advanced automobiles and luxury brands…
