Press release
Global Sheet Molding Compound and Bulk Molding Compound Market by Key players, Growth Analysis & Forecast to 2021
Market Scenario:
Sheet Molding Compound (SMC) is a fiber protected polymer matrix composite material which offers a range of beneficial properties that are demanded by various modern applications. Bulk Molding Compound (BMC) is any combination of cut glass components and resin in the form of a bulk pre-preg. Bulk molding compound is mainly suitable either for compression or injection molding. Transportation, electrical, construction and other applications such as aerospace, automotive, marine and consumer industries are increasing using sheet molding compound to take better advantage of its performance. Glass fiber is expected to hold the maximum market share of USD 589.5 million by 2021, growing at a CAGR of 6.7%. The global sheet molding compound and bulk molding compound market is expected to and reach USD 3,531.1 Million at the end of the forecasted period and is expected to show a staggering growth at CAGR of 6.5% from 2016 to 2021.
Request a sample @ https://www.marketresearchfuture.com/sample_request/1671
Key Players
The key players of global Sheet Molding Compound and Bulk Molding Compound Market report include- IDI Composite International, Citadel Plastics Holding Inc., Menzolit GmbH, Polynt S.P.A, Core Molding Technologies Inc., Continental Structural Plastics Inc., Showa Denko K.K., Changzhou Runxia Fiberglass Products Co., Ltd., and Royal Tencate.
Regional Analysis of Global Sheet Molding Compound and Bulk Molding Compound Market
APAC will expand at a CAGR 7.2% over the forecast period with largest market size of USD 1,885.2 million by 2021. The share is attributed to the growing transportation and electrical & electronics industries in this region. China stands on the top most position as producers and consumer which account the total of around 50% of the global market.
However Europe is expected to acquire a market share of USD 923.7 million and will expand at a CAGR 4.9% by 2021. It is followed by U.S.
Segments
Global Sheet Molding Compound and Bulk Molding Compound market is segmented on the basis of Type, Application, and Region. On the basis of type it is segmented as glass fiber and carbon fiber. On the basis of application it is segmented as transportation, electrical and construction. Additionally on the basis of region, it is segmented as North America, Europe, APAC and Rest of the World.
Browse report @ https://www.marketresearchfuture.com/reports/sheet-molding-compound-market-1671
About Market Research Future:
At Market Research Future (MRFR), we enable our customers to unravel the complexity of various industries through our Cooked Research Report (CRR), Half-Cooked Research Reports (HCRR), Raw Research Reports (3R), Continuous-Feed Research (CFR), and Market Research & Consulting Services.
Contact:
Market Research Future
Office No. 524/528, Amanora Chambers
Magarpatta Road, Hadapsar
Pune - 411028
Maharashtra, India
+1 646 845 9312
Email: sales@marketresearchfuture.com
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Global Sheet Molding Compound and Bulk Molding Compound Market by Key players, Growth Analysis & Forecast to 2021 here
News-ID: 905005 • Views: …
More Releases from Market Research Furture
Global Wireless Microphone Market to Reach USD 4.5 Billion by 2035, Growing at 6 …
The global Wireless Microphone Market was estimated at USD 2.17 Billion in 2024 and is projected to reach USD 4.5 Billion by 2035, growing at a CAGR of 6.94% during the forecast period from 2025 to 2035. The market growth is fueled by increasing adoption of wireless audio solutions in live events, conferences, and entertainment, alongside the surging popularity of streaming platforms and content creation, which require high-quality, reliable audio…
Global Security Cameras Market to Reach USD 51.44 Billion by 2032, Growing at a …
The global Security Cameras Market was valued at USD 11.34 billion in 2023 and is projected to reach USD 51.44 billion by 2032, growing at a robust CAGR of 18.30% during the forecast period from 2024 to 2032. The market growth is driven by increasing consumer interest, heightened security concerns, and a shift towards advanced smart surveillance systems.
The rapid adoption of IoT technologies in smart homes further boosts the…
UV Curable Ink Market to Surpass USD 10.6 Billion by 2034, Growing at 7.0% CAGR
The UV Curable Ink Market is poised for substantial growth, projected to increase from USD 5.79 billion in 2025 to USD 10.66 billion by 2034, growing at a compound annual growth rate (CAGR) of 7.0% during the forecast period. This market expansion is driven by rising demand across multiple industries including packaging, publishing, textiles, electronics, and industrial printing due to UV curable inks' eco-friendly profile, fast-drying properties, and superior durability.
UV…
Bio-Based Foam Market Set to Surge to USD 8.74 Billion by 2034, Driven by 10.40% …
The bio-based foam market is entering a phase of accelerated growth, driven by the rising global emphasis on sustainability, stringent environmental regulations, and the growing demand for eco-friendly alternatives across industries. In 2024, the market was valued at approximately USD 3.25 billion, and it is forecasted to reach USD 8.74 billion by 2034, expanding at a robust CAGR of 10.40% during the forecast period.
Bio-based foams are manufactured from renewable biological…
More Releases for Molding
LSR Molding: Understanding Silicone Rubber Injection Molding
Liquid Silicone Rubber (LSR) molding is a specialized manufacturing process used to create flexible, durable, and heat-resistant silicone parts. This technique is widely used across industries such as automotive, medical, electronics, and consumer goods. Its ability to produce high-quality parts with precision and consistency makes it a top choice for many manufacturers.
• What Is LSR Molding?
LSR molding, or Liquid Silicone Rubber injection molding (https://www.newtopcustomsilicone.com/capabilities/liquid-silicone-injection-molding/), involves injecting two-component platinum-cured silicone into…
Molding the Future: Plastic Injection Molding Machine Market Forecast (2023-2033 …
The global plastic injection molding machine market size was $10.3 billion in 2021 and is anticipated to reach $16.4 billion in 2031, growing at a rate of 4.8% from 2022 to 2031.
Market Outlook:
The Plastic Injection Molding Machine Market anticipates molding the future with a positive outlook from 2023 to 2033. As industries across the globe witness a surge in demand for plastic products, the market expects significant growth in the…
HDPE Blow Molding and Injection Molding Containers Market
Persistence Market Research (PMR) has published a new research report on HDPE blow molding and injection molding containers. The report has been titled "HDPE Blow Molding and Injection Molding Containers Market: Global Industry Analysis 2013-2017 and Forecast 2018-2026." The proliferating demand for HDPE blow molding and injection molding containers is largely from the beverage, chemical & petrochemicals, and pharmaceuticals industries, owing to the barrier properties of HDPE and convenience in…
Sheet Molding Compound and Bulk Molding Compound Market - Growth Prophesy 2025 | …
Global Sheet Molding Compound and Bulk Molding Compound Market: Snapshot
The global market for sheet molding compound and bulk molding compound is expected to advance with the launch of superior quality, lightweight, and more durable bulk molding and sheet molding compounds. By virtue of their higher line throughputs and lower production costs, these compounds are increasingly preferred by several leading manufacturers. As an augmenting number of advanced automobiles and luxury brands…
HDPE Blow Molding and Injection Molding Containers Market 2026
Due to its intrinsic physical and mechanical properties, high density polyethylene (HDPE) is highly used as packaging materials in different industries including food, beverages, pharmaceuticals, cosmetics, homecare, chemicals, and petrochemicals. Urbanization, changing consumer preferences, and expanding middle class have significantly contributed to the rising demand for consumer goods. Increased demand for consumer goods has, in turn, revolutionized the packaging industry, especially plastic packaging.
Polyethylene is most commonly used in the packaging…
Sheet Molding Compound and Bulk Molding Compound Market 2017-2025 : Polynt S.P.A …
Global Sheet Molding Compound and Bulk Molding Compound Market: Snapshot
The global market for sheet molding compound and bulk molding compound is expected to advance with the launch of superior quality, lightweight, and more durable bulk molding and sheet molding compounds. By virtue of their higher line throughputs and lower production costs, these compounds are increasingly preferred by several leading manufacturers. As an augmenting number of advanced automobiles and luxury brands…
