Cold Rolling Oils/Lubricants Market: Opportunity Assessment Research Study 2017 - 2027

Metal rolling is the method of stretching a piece of metal sheet to a certain thickness by increasing its length. Metal rolling can be done in two ways, by cold rolling process and by hot rolling process. Cold rolling oils/ lubricants are used in cold rolling processes, is described as the life blood of the process because of their impact on product quality and mill productivity. The ability of a cold rolling lubricant is observed in terms of its effect on rolling mill performance. It is defined on the basis of the coefficient of friction it offers in the roll bite region. By reducing the friction, rolling oils increase the reduction in thickness obtainable with a roll load. However, the friction must not fall below the limit necessary to carry out the desired deformation. Thus, cold rolling lubricants should provide optimum frictional conditions in order to reduce the rolling force and to cut energy demands to the minimum. Moreover, the friction in the roll bite seriously affects the quality of the material being rolled, since too high friction results in surface defects, eg, friction pickup. Cold rolling oil are also used for enhancing the surface quality by lubrication and cooling the frictional and plastic deformation heat generated during the cold rolling process.

Global Cold Rolling Oils/ Lubricants Market: Dynamics

Growing metal & mining industry and automotive industry is expected to drive the global cold rolling oils/ lubricants market. Increasing usage of metal sheets in different application like container manufacturing, automobile manufacturing, metal sheets used in roofing purpose and other application is expected to uplift the global cold rolling oils/ lubricants market as manufacturing of all this application products requires cold rolling oils for the reduction of friction resistance as well as reduction of heat generated due to friction.

Request For Report Sample: https://www.futuremarketinsights.com/reports/sample/rep-gb-5131

Global cold rolling oils/ lubricants market is mainly affected due to high manufacturing cost of cold rolling process as compared to hot rolling process. Therefore preference towards hot rolling process is going to create major challenge for the cold rolling oils/ lubricants manufacturers. Since cold rolling oils/ lubricants are only used in cold rolling process, affecting the global cold rolling oils/ lubricants market.

Global Cold Rolling Oils/ Lubricants Market: Segmentation

Global cold rolling oils/ lubricants market can be segmented on the basis of product type, material type, applications and region

On the basis of product type, global cold rolling oils/ lubricants market can be segmented as

Full Synthetic

Semi-Synthetic

Mineral Based

On the basis of material type, global cold rolling oils/ lubricants market can be segmented as

Ferrous Metals

Non Ferrous Metals

On the basis of application, global cold rolling oils/ lubricants market can be segmented as

Metal Processing

Container Manufacturing

Automotive Industry

Others

Global Cold Rolling Oils/ Lubricants Regional Outlook

Asia Pacific is estimated to be the dominating market for cold rolling oils/ lubricants market in the forecasted period. This is mainly due to presence of large number of metal manufacturing industries in this region, owing to which there is high presence of cold rolling mills in this region. Therefore with the high presence of cold rolling mills there is high usage of cold rolling oils/ lubricants in this region. Europe is also anticipated to hold significant market share of global cold rolling oil/ lubricants market due to growing automotive industry in this region. Here automotive parts are manufactured, and hence cold rolling oils/ lubricants are being extensively used in this industry.

Request For Report Table of Content (TOC): https://www.futuremarketinsights.com/toc/rep-gb-5131

Global Cold Rolling Oils/ Lubricants Market: Market Participants

Some of the main manufacturers of cold rolling oil/ lubricants are namely

Q8Oils

Wallover Metalworking Fluids, Inc.

United Oil Company

PRO-CHEM-CO

Eastern Petroleum Pvt. Ltd.

Houghton International I

Exxon Mobil Corporation

DANA Lubricants Factory LLC

Buhmwoo

Hindustan Petroleum

TOTAL Lubrifiants

PETROYAG

FRATELLI RICCI S.r.l.

Quaker Chemical Corporation

Indian Oil Corporation Ltd

ABOUT US:
Future Market Insights (FMI) is a leading market intelligence and consulting firm. We deliver syndicated research reports, custom research reports and consulting services, which are personalized in nature. FMI delivers a complete packaged solution, which combines current market intelligence, statistical anecdotes, technology inputs, valuable growth insights, an aerial view of the competitive framework, and future market trends.

CONTACT:
Future Market Insights
Abhishek Bhudoliya
616 Corporate Way, Suite 2-9018,
Valley Cottage, NY 10989,
United States
T: +1-347-918-3531
F: +1-845-579-5705
Email: sales@futuremarketinsights.com
Website: www.futuremarketinsights.com

This release was published on openPR.