openPR Logo
Press release

Technological Advancements to Influence Automotive Timing Belt Market Growth

08-08-2017 03:56 PM CET | Business, Economy, Finances, Banking & Insurance

Press release from: Future Market Insights

Technological Advancements to Influence Automotive Timing

The automotive timing belt is an essential part of any internal combustion engine. The function of these timing belts or chains is to coordinate the rotation of camshafts and crankshaft in such a way that the inlet and outlet valves open and close at correct and suitable times during an engine’s exhaust and intake cycles. The timing belt or timing chain is very crucial as it prevents the pistons from hitting the valves. Automotive timing belts are basically either toothed belts or drive belts with teeth on the inside surface. The timing chain is a simple roller chain.

Timing belts are usually made from polymers, rubbers or metal chains. These days, manufacturers are focusing on creating timing belts or chains which facilitate proper synchronization of crankshaft rotation with camshaft rotation. However, some still old engines use gears for driving the camshaft. There are many advantages of using timing belts or timing chains instead of direct gears for the placement of camshaft away from the crankshaft. Additionally, engines with multiple camshafts have a timing chain or belt that enables the engine designer to place camshafts away from each other. Timing chains were quite popular in automobiles through the 1980’s. However, timing chains have become increasingly popular again in recent years. Timing chains are normally more robust than timing belts, but, neither is as strong as the direct gear drive. However, since timing belts are less expensive, operate more quietly and are lighter, they are preferred over direct gear drive.

Request For Report Sample@ http://www.futuremarketinsights.com/reports/sample/rep-gb-3758

Automotive timing Belt Market dynamics:

The market for automotive engine timing drives is composed principally of belt- and belt-based products, with belts being currently used in a majority of engines. In recent years, however, the automotive engine manufacturers are leaning towards more reliable and lower fuel consumption models. Therefore, their interest in belts, which are more durable and compact, has increased. Technological modernization has assisted in the expansion of new belts that are quieter, lighter and smaller than conventional belts and as a result, automakers are increasingly choosing to use belts in new engines. The market share of automotive belts is expected to surpass that of driving gears in the next five years.

The market for automotive timing belts is anticipated to grow at a healthy CAGR in the coming future. Furthermore, growing applications of automotive belts in the automotive industry is expected to propel the growth of the automotive timing belt market in near future.

Automotive timing Belt Market segmentation:

Automotive timing belts can be segmented on the basis of type of chemicals and application.

By Product type, the automotive timing belt Market can be segmented into:

Timing Belts

Timing Chains

On the basis of Sales Channels, the automotive timing belt market can be segmented into:

OEM

Aftermarket

On the basis of Vehicle Type, the automotive timing belt market can be segmented into:

Passenger Cars

LCV

HCV

Automotive timing Belt: Regional Outlook:

Owing to increasing global vehicle production and manufacturing, adoption of fuel competent technologies, developments in materials in reference to their durability and stern emission guidelines and norms, the market for timing belts is estimated to grow at a swift pace in coming future. The demand for timing chains or belts is also projected to grow due to the implementation of new fuel saving technologies and the growing government regulations on tail pipe emissions globally. The demand for timing belts and chains is coming from emerging nations such as India, China, Brazil, Russia and South Africa. Additionally, the increasing demand for automobiles in these regions is expected to grow at a very rapid rate, which in turn, is estimated to fuel the growth of the overall timing belt market globally. In terms of the global demand, the Asia Pacific region is anticipated to be largest market for the automotive timing belts and chains due to the growing vehicle production in China, followed by India. The demand for automotive timing belts in European countries is also anticipated to be high owing to the increasing production of automobiles in this region.

Visit For TOC@ http://www.futuremarketinsights.com/toc/rep-gb-3758

Automotive timing Belt: Market Participants

Some of the market participants in the Automotive timing Belt market are:

B&B Manufacturing

Dayco

Ningbo Beidi Synchronous Belt

NingBo Fulong Synchronous Belt

SKF

Tsubaki

Carlstar Group

ContiTech (Continental AG)

Fenner

Gates

ACDelco

Bando

Beck Arnley

ABOUT US:
Future Market Insights (FMI) is a leading market intelligence and consulting firm.We deliver syndicated research reports, custom research reports and consulting services, which are personalized in nature. FMI delivers a complete packaged solution, which combines current market intelligence, statistical anecdotes, technology inputs, valuable growth insights, an aerial view of the competitive framework, and future market trends

CONTACT:
Future Market Insights
616 Corporate Way, Suite 2-9018,
Valley Cottage, NY 10989,
United States
T: +1-347-918-3531
F: +1-845-579-5705
Email: sales@futuremarketinsights.com
Website: www.futuremarketinsights.com

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Technological Advancements to Influence Automotive Timing Belt Market Growth here

News-ID: 659750 • Views: 81

More Releases from Future Market Insights

How Changing Dynamics of Cable Testing Market are Reflecting on Growth Strategie …
Global Cable Testing Market: Introduction The cost of the substitution of cables that are concealed is very high. Faults in the cable, bending, kinking, and crushing, are not always visible, which has created the requirement for cable testing. Thus, cable testing helps check the cable functionality, cable quality, and cable conformity. Several times, cable testing by visual inspection is an effective way of identifying the actual problem before it causes any
How Transformative Trends in Self-Organising Network Market are Molding Strategi …
Self-Organising Network: Introduction With accelerated advancements and increasing complexities in the radio network technologies, such as those utilised for the development of LTE and 5G networks, which are used for planning, management, configuration, healing and optimisation, are required to be automated to facilitate efficiency. At present, suppliers are offering self-organising networks that possess the ability to offer optimum performance. Self-organising networks are use cases that perform network governance, including network planning,
Mining Vehicle AC Kits Market: Exploring the Impact of Trends on Strategies of K …
Mining Vehicle AC Kits Market: Introduction Cabin space in mining equipment has become more sophisticated in the recent past. The installation of mining vehicle AC kits has evolved from an optional feature to a necessary feature. Mining equipment manufacturers have made advancements in technology related to efficiency, performance and cost of air conditioning systems in order to make them affordable and economical to enable low-budget and compact installations without compromising on
Key Factors to Fuel Growth of the Talent Acquisition & Staffing Technology and S …
With the growing importance of recruiting and retaining top talent effectively and efficiently, smart hiring processes are the need of the hour. It is about time organisations move beyond merely scrutinising resumes. Salaries and benefits are important factors, but adopting ways that would make candidates an important part of the hiring process will attract the best talent. Studies reveal that due to discrepancies in existing Applicant Tracking Systems (ATS), hiring

All 5 Releases


More Releases for Automotive

Automotive Sunroof Market
Automotive Sunroof is a fixed or operable opening in vehicle that allows light or fresh air to enter inside a car. Sunroof are of many shapes and sizes and styles and they are either manually driver or motor driven. Increasing demand for premium cars and growing need to control light inside the vehicle is fueling the growth of automotive sunroof market. The major driver influencing the growth of automotive sunroof is
Automotive MEMS Sensor
The Insight Partners added “Laser Technology Market to 2025” to its research database. The report is spread across 150 pages and supported by 10 company leaders. A laser is a coherent and focused beam of photons; coherent, in this context, means that it is all one wavelength, unlike ordinary light which showers on us in many wavelengths. Laser technology is used for an extensive range of professional field measurement applications which
Automotive Air Filter Market
An automotive air filter is a device that is made up of fibrous materials that removes solid particulates like pollen, dust, bacteria, and mould from the intake air. A chemical type of air filter consist of a catalyst or absorbent for removing molecular contaminants like ozone or volatile organic compounds. Air filters are being used in applications where air quality is of vital importance, notably in building ventilation systems and
Automotive Fasteners Market
Fasteners are the mechanical components that holds, joins or affixes two or more parts together, automotive industry is the largest market for the fastener. Automotive fasteners are made up of various materials such as Iron, Aluminum, Brass, Nickel, Stainless steel, Plastic, they are further classified with their distinct characteristics. Automotive fasteners are generally used for the clamping parts of vehicle together to avoid their separation or wobbling, transmitting loads as
Automotive Tires Market
The automotive tires play a very important role in vehicle performance along with the vehicle engine. A tire should be fine enough to carry vehicle weight and pressure on any road with superior breaking performances. The manufacturers focus on enhancing the production and performance capabilities of tires to meet with the growing demands of OEMs as well as secondary market.The automotive tires market is expected to grow rapidly in the
Automotive Actuators Market 2017 - AK, FTE automotive
MarketReports.biz’s Automotive Actuators market research report provides the newest industry data and industry future trends, allowing you to identify the products and end users driving Revenue growth and profitability. The industry report lists the leading competitors and provides the insights strategic industry Analysis of the key factors influencing the market. Request for sample @ https://goo.gl/auN0LC The Players mentioned in our report AK FTE automotive The report includes the forecasts, Analysis and discussion of important industry trends,