Press release
Boosting the Automotive Fuel Tanks Market By 2021
To view complete report @ http://www.persistencemarketresearch.com/market-research/automotive-fuel-tanks-market.asp
Plastic high-density polyethylene (HDPE) fuel tanks are made by blow molding and metal (steel or aluminum) fuel tanks are welded from stamped sheets. Blow molding technology is increasingly used as it shows its capacity to obtain very low emissions of fuel. Plastic high-density polyethylene can be converted into complex shapes, allowing the tank to be mounted directly over the rear axle, saving space and improving crash safety. On the other hand, the technology used in metal fuel tank is very good in limiting fuel emissions. In the event of crash or an accident plastic fuel tanks are safer than steel fuel tanks. Unlike metal fuel tanks, many can bend and flatten, rather than tearing, rupturing and spilling gasoline, thereby safely eliminating fuel leakage as a cause of a fire or explosion. Due to the plastic fuel tanks car designers can optimize the space that is available for the fuel tank since they can be produced using very unusual shapes. Plastic can be molded around specific parts. In addition, plastic fuel tanks are corrosion resistant, whereas steel tanks require stainless steel to provide a similar level of corrosion resistance, which also means a greater cost.
A sample of this report is available upon request @ http://www.persistencemarketresearch.com/samples/3548
On the basis of type automotive fuel tanks market is divided in two broad categories: plastic fuel tank and steel fuel tank. Based on the technology automotive fuel tanks market is divided in three broad segments: Multilayer technology, barrier technology and others.
North America is the largest market for automotive fuel tanks, followed by Europe and Asia Pacific. APAC region is expected to be the fastest growing market in terms of sheer volume. China and India hold the key for future market trends in automotive fuel tanks market owing to large population, increase in living standards due to higher disposable income and high growth rate of automotive industry in these regions. Germany, France and Italy are hub for some of the major automobile manufacturers in Europe where as the U.S. is the largest market in North America.
Some of the major drivers contributing the overall market growth of automotive fuel tanks include high growth rate of automotive industry, government regulation and increase in environment friendly fuel tanks.
To view TOC of this report is available upon request @ http://www.persistencemarketresearch.com/toc/3548
Some of the major companies operating in the automotive fuel tanks market include Kautex Textron GmbH & Co KG, Benteler AG, Fuel System Solutions, Inergy Automotive Systems, Magna International Inc., TI Automotive Ltd., YAPP Automotive Parts Co Ltd, Kongsberg Automotive, Toyoda Gosei Co., Ltd. and Visteon Corporation.
About Us
Persistence Market Research (PMR) is a third-platform research firm. Our research model is a unique collaboration of data analytics and market research methodology to help businesses achieve optimal performance.
To support companies in overcoming complex business challenges, we follow a multi-disciplinary approach. At PMR, we unite various data streams from multi-dimensional sources. By deploying real-time data collection, big data, and customer experience analytics, we deliver business intelligence for organizations of all sizes.
Contact Us
Persistence Market Research
305 Broadway
7th Floor, New York City,
NY 10007, United States,
USA - Canada Toll Free: 800-961-0353
Email: sales@persistencemarketresearch.com
Web: http://www.persistencemarketresearch.com
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Boosting the Automotive Fuel Tanks Market By 2021 here
News-ID: 641805 • Views: …
More Releases from Persistence Market Research
Blood Collection Tubes Market Size, Growth, Share & Trends 2025-2032 | Global In …
The blood collection tubes market plays a pivotal role in modern healthcare by enabling safe, efficient, and accurate collection, storage, and transportation of blood samples. Extensively used in diagnostic laboratories, hospitals, and research centers, these tubes are critical for hematology, biochemistry, immunology, and molecular testing. They help maintain sample integrity, minimize contamination risks, and streamline laboratory workflows, making them indispensable in clinical diagnostics.
Request a Sample:
https://www.persistencemarketresearch.com/samples/35126
Market Overview
According to a recent study…
Frozen Pastries Market to Reach $3.8 Bn by 2032 Driven by Convenience and Ready- …
The global frozen pastries market is set for consistent expansion over the next decade, driven by the growing demand for convenient, ready-to-bake bakery products and evolving consumer lifestyles. According to market projections, the global frozen pastries market size is likely to be valued at US$ 2.6 billion in 2025 and is estimated to reach US$ 3.8 billion by 2032, growing at a CAGR of 5.7% during the forecast period from…
Cookies Market to Reach US$ 54.4 Bn by 2032 Driven by Rising Demand for Premium …
The global cookies market is witnessing steady growth, with its valuation expected to reach US$ 38.3 billion in 2025. According to projections, the market is set to rise significantly and reach approximately US$ 54.4 billion by 2032, expanding at a compound annual growth rate (CAGR) of 5.1% between 2025 and 2032. This growth trajectory is fueled by evolving consumer lifestyles, increasing demand for convenient and on-the-go snacks, and the rising…
Flaxseeds Market Growth Driven by Health Trends | Valued at US$ 1,284.7 Mn in 20 …
The global flaxseeds market is witnessing substantial expansion, driven by the growing consumer awareness of health benefits associated with flaxseed consumption and its increasing use across diverse industries such as food and beverages, pharmaceuticals, and cosmetics. According to recent industry analysis, the global flaxseeds market size is likely to be valued at US$ 1,284.7 million in 2025, and is projected to reach US$ 2,145.3 million by 2032, expanding at a…
More Releases for Automotive
Automotive Grommet Market set for explosive growth: Cooper Standard Automotive, …
According to HTF MI, "Global Automotive Grommet Market: Industry Trends, Share, Size, Growth, Opportunity and Forecast 2024-2030". The Global Automotive Grommet Market is anticipated to grow at a compound annual growth rate (CAGR) of 5.96% from 2024 to 2030, reaching USD 100 Billion in 2024 and USD 150 Billion by 2030.
Automotive grommets are protective rings or eyelets made from rubber or plastic, used to protect or cover holes in metal…
KSA Automotive Market | KSA Automotive Industry | KSA Automotive Industry Resear …
Saudi Arabia’s automotive market faced a decline in new car sales due to tripling of value-added tax (VAT) rates. Effective in July 1, 2020, Saudi Arabia hiked its VAT from 5% to 15%.
Vision 2030 trying to attract foreign investment to kick start Dammam manufacturing city to aid re-exports & fulfill domestic demand
Surge in Domestic Manufacturing to gain independence of Imports: With Vision 2030, KSA is trying to gain impendence of…
Automotive Fuel Injectors Market: Growing Automotive Sales Fueling Automotive Fu …
Automotive fuel injectors market is likely to grow at a steady pace in the long run, according to a new report by Fact.MR. The demand for automotive fuel injectors continues to remain influenced with a multitude of industry-specific and macroeconomic factors. Significant growth in the automotive sector, coupled with increasing vehicle fleet remain instrumental in driving the demand for automotive fuel injectors worldwide. Fact.MR estimates that the sales of automotive fuel injectors are expected…
Global Automotive Safety Market 2019 Worldwide Outlook By Autoliv, Delphi Automo …
Automotive safety systems are designed to comply with the standards and regulations prescribed by government agencies and transport authorities worldwide. Passive safety systems are designed to protect passengers, drivers, and pedestrians during an accident.
In terms of region, the global Automotive Passive Safety Systems market can be segmented into North America, Europe, Asia Pacific, and Middle East & Africa. Asia Pacific is likely to hold a prominent share of the global…
Global Oil Pump for Automotive Market 2018 Analysis -Bosch,Denso,Aisin Seiki,Del …
According to this study, over the next five years the Oil Pump for Automotive market will register a xx% CAGR in terms of revenue, the global market size will reach US$ xx million by 2023, from US$ xx million in 2017. In particular, this report presents the global market share (sales and revenue) of key companies in Oil Pump for Automotive business.
Get Sample Copy of this Report for more Information…
Global Automotive Body Welded Assembly Market 2018 - Daesan, Baylis Automotive, …
Accord Market, recently published a detailed market research study focused on the “Automotive Body Welded Assembly Market” across the global, regional and country level. The report provides 360° analysis of “Automotive Body Welded Assembly Market” from view of manufacturers, regions, product types and end industries. The research report analyses and provides the historical data along with current performance of the global PP Pipe industry, and estimates the future trend of…
