openPR Logo
Press release

Foam Dressing: Recent Study including Growth Factors, Applications, Regional Analysis, Key Players and Forecasts

06-12-2017 10:46 AM CET | Business, Economy, Finances, Banking & Insurance

Press release from:

Foam Dressing: Recent Study including Growth Factors,

Foam dressings are extremely absorbent and were first introduced approximately 25 years ago. These dressing are generally made up of polyurethane, and also silicone, and are available is different shapes, sizes and compositions. Foam dressings are soft and cushion-like absorbent dressing for granulating wounds of different etiologies and intensity.

Ask for Sample copy @

Also, these dressings are gas-permeable, give thermal insulation and assist in maintaining a moist wound environment. Foam dressing can be used as either primary or secondary dressing on different types of wound, ranging from leg ulcers to cavity wound where exudation is a problem. Dissimilar to gauze, foam dressings do not cast off fibers particles, and therefore depending on their preparation they can be used on light, moderate or heavy wounds.

This report studies sales (consumption) of Foam Dressing in Global market, especially in United States, China, Europe, Japan, focuses on top players in these regions/countries, with sales, price, revenue and market share for each player in these regions, covering

• 3M Healthcare (US)
• Medtronic Plc (US)
• Coloplast A/S (Denmark)
• CONMED Corporation (US)
• ConvaTec, Inc. (US)
• Molnlycke Health Care AB (Sweden)
• Organogenesis, Inc. (US)
• Derma Sciences, Inc. (US)
• Paul Hartmann AG (Germany)
• Smith & Nephew Plc (UK)

Furthermore, foam dressings can be left in a wound for several days without causing any kind of softening and thereby increasing their cost-efficiency. Let us put some light on a few advantages of foam dressings.
Advantages of Foam Dressings are that, they…
…do not stick to the wound directly
…act as cushion to protect the wound
…can be used in case of an infection
…might be used at the time of compression therapy
…are suitable for wounds with hypergranulation

A wide range of foam dressings which include both self-adhesive and non-adhesive, is available and their quality to adjust and match according to the size and shape of a wound makes them predominantly useful for cumbersome anatomical surfaces such as heel and sacrum. Based on the composition, foam dressings have the ability to absorb and soak-up form light to heavy amounts of fluid which oozes from the wound.

Also, because these foam dressings help in maintaining a moist environment, they can be removed with bare minimum to no pain. Foams are versatile materials which can be used in combination with other dressing materials, e.g., for diabetic foot ulcers, compression bandages are used along with foam dressings.

Read More:

About Us:
QY Research Groups is a company that simplifies how analysts and decision makers get industry data for their business. Our unique colossal technology has been developed to offer refined search capabilities designed to exploit the long tail of free market research whilst eliminating irrelevant results. QY Research Groups is the collection of market intelligence products and services on the Web. We offer reports and update our collection daily to provide you with instant online access to the world's most complete and current database of expert insights on Global industries, companies, products, and trends.

Contact us:
Follow Us:
LinkedIn | Twitter| Facebook

This release was published on openPR.

Permanent link to this press release:

Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Foam Dressing: Recent Study including Growth Factors, Applications, Regional Analysis, Key Players and Forecasts here

News-ID: 571053 • Views: 104

More Releases from

Digital Advertising Market Analysis, Market Size, Application Analysis, Regional …
A Global Emergence of New Aged Digital Advertising What does that mean to us? There has been a major increase in the number of start-ups across the globe today. People have well thought out ideas, the sense of doing perfect business, maintaining their ethics and being very accurate and spectacular entrepreneurs. Innovation has taken yet another turn and has worked out in everyone’s favour, especially since the kinds of ideas that have
Latest Report On Magnetic Resonance Imaging (MRI) Systems Market, Forecast To 20 …
Magnetic resonance imaging is a radiological non invasive medical imaging technique by which the anatomy and physiology of different organs of the body is captured. The device was invented by Paul C. Lauterbur in September of 1971. It differs from CT scan by the fact that it does not use x-rays. Hence it is safer, but it takes longer time that CT scan is louder and people with implants such
Latest Market Analysis On Neuroendovascular Coil Market, Top Manufacturers Are S …
Endovascular coiling is a procedure is performed to hinder the flow of blood into an aneurysm which is a weakened area in the wall of an artery. Recently, this method is more frequently used in treating brain aneurysms and the process if termed as Neuroendovascular Coil or aneurysm coil embolization. The coiling method was first introduced in the 1990s as a way of treating ruptured or unruptured aneurysms without the
Orthopedic Surgical Robots Market - Global Trends, Market Share, Industry Size, …
Robotic Surgery is a breakthrough in the field of medical science, aiming to improve the accuracy and precision of surgical procedures. In case of orthopaedics, robots are mainly focused on increasing the precision of preparing bony surfaces, which cannot, otherwise, be achieved by human surgeons. Robots were first used for hip replacement and on successful execution of it, it was also used for knee arthroplasty. It has been observed that

All 5 Releases

More Releases for Foam

Foam Blowing Agents Market - Product-based Foam Industry 2017 - 2025
Global Foam Blowing Agents Market: Snapshot Development in automotive industry is anticipated to expand the global market for foam blowing agents. Foam blowing agents are used for enhancing the properties of polymers. They provide the polymer matrix a cellular structure that strengthens the foam. Polymeric foams have optimum flexibility, low heat transfer, and low density. The various foam blowing agents available in the global market are methylal, inert gases, methyl formate,
Global Anti-Foam Market
Anti-foam market: Drivers The applications of anti-foam agents are extensive and varied. The demand is rising with time. The antifoam market will grow and shine in the coming few years. Staggering expansion of the pharmaceuticals industry, packaged food industry, textile industry will drive the overall development of the antifoam markets spread across the globe. To compliment this soaring demand, several new players are foraying in the antifoam production market. Funds are
Technical Foam Services Develops Innovative New Scaffold Foam
Northamptonshire, United Kingdom (8th February, 2013) - Technical Foam Services Ltd, a leading independent engineer-based manufacturer and foam producer, announces the creation of a new scaffold foam. Technical Foam Services Ltd and their strategic construction partner have been working in unison to develop the Closed Cell PE Scaffold Foam, which uses high density polyethylene foam to offer protection against work equipment damage to decorated surfaces. The scaffold foam also uses a
Technical Foam Services Creates Foam Inserts for Rak Ceramics
Northamptonshire, United Kingdom (18th February, 2013) - Technical Foam Services Ltd, a leading independent engineering-based manufacturer and foam producer, earlier this month secured a contract with leading ceramic tile design and manufacturer Rak Ceramics. Rak Ceramics specialises in offering a range of high-quality ceramic tiles, distributing their products to DIY retailers and kitchen designers nationwide. Sales representatives from the company were becoming increasingly concerned with the loss and damage of these tiles
Technical Foam Services Manufactures Cancer Prevention Foam
Northamptonshire, United Kingdom (17 June, 2011) - Technical Foam Services, a leading independent engineering-based manufacturer and foam producer, is proud to have been part of an exciting new development in the world of cancer prevention. A far cheaper and more patient-friendly method has been developed by the UK Medical Research Council, which involves the use of a reticulated foam sponge encapsulated within a pill. Once the pill is swallowed, it dissolves
Technical Foam Services Expand Range of Foam Insert Fabrics
Northamptonshire, United Kingdom (19th May, 2011) – Technical Foam Services, a leading independent engineering-biased manufacturer and foam producer, has expanded their range of fabrics to be used with foam inserts. Technical Foam Services have long been recognised as the UK’s leading supplier of foam inserts, producing them for a wide variety of applications, such as large suitcase inserts suitable for holding ceramics and glassware through to small inserts used