Common Causes of 304 Stainless Steel Pipe Corrosion
1.1 Surface contamination: attached to the surface of the oil, dust and acid, alkali, salt and other under certain conditions into the corrosive medium, react chemically with some elements of stainless steel pipe, chemical corrosion and rust.
1.2 Surface scratches: various scratch destruction of the passive film, reduced ability to make stainless steel protection, prone to chemical reaction medium, chemical corrosion and rust.
1.3 Cleaning: Cleaning is not clean after pickling passivation resulting residue retention, direct corrosion of stainless steel (chemical etching).
2.2.1 Carbon pollution: in contact with the corrosive medium scratches caused by carbon steel with a galvanic cell to produce electrochemical corrosion.
2.2.2 Cutting: cutting slag, spatter and so easy to produce electrochemical corrosion rust and corrosion medium adhesion material form the original cells.
2.2.3 Roasted school: Ingredients flame heating zone to produce electrochemical corrosion and microstructure changes and uneven, and corrosive media, a galvanic cell.
2.2.4 Welding: physical defects (undercuts, pores, cracks, lack of fusion, incomplete penetration, etc.) and chemical defects in the weld zone (coarse grains, the grain boundary chromium depletion, segregation, etc.) and corrosive media, a galvanic cell generated electrochemical corrosion.
2.2.5 Material: stainless steel chemical defects (uneven composition, S, P impurities, etc.) and physical surface defects (loose, sand holes, cracks, etc.) in favor of a galvanic cell with the corrosive medium to produce electrochemical corrosion.
2.2.6 Passivation: stainless steel pickling passivation effect caused by bad or uneven surface passivation film is thin, easy to the formation of electrochemical corrosion.
2.2.7 Cleaning: product and stainless steel parts remaining residue with a stainless steel pickling passivation chemical corrosion formation of electrochemical corrosion.
2.3 stress concentration is liable to cause stress corrosion In short, due to its special stainless steel microstructure and surface passivation film, making it generally more difficult to react chemically with the medium is corrosive, but not not to be under any conditions corrosion. In corrosive media and incentives (such as scratches, splashes, cutting slag, etc.) the presence of stainless steel and corrosion can occur to produce medium slow chemical corrosion and electrochemical reactions, but under certain conditions the corrosion rate is quite fast corrosion phenomenon, especially pitting and crevice corrosion. Corrosion mechanism of stainless steel mainly electrochemical corrosion.
Therefore, industrial stainless steel pipe products should take all effective measures in the course of processing operations, to avoid corrosion conditions and incentives to produce. In fact, many corrosion conditions and incentives (such as scratches, splashes, cutting slag, etc.) also have a significant adverse effect on the appearance of product quality, and should also to be overcome.
Hunan Great Steel Pipe Co.,Ltd
Address: Hunan Steel Industrial Zone,No.9 Xiangfu Road, Yuhua District, Changsha, Hunan, China
Stainless Steel Pipe:
Industrial Stainless Steel Pipe:
Hunan Great Steel Pipe Co.,Ltd is a world-class production and service provider of submerged arc straight seam welded pipe as the first subsidiary of Shinestar Group. Hunan Great Steel Pipe Co.,Ltd pays more attention to in the pipeline engineering research areas as a pioneer of China Petroleum Pipeline & Gas Pipeline Science Research Institute, Such as: the use of oil and gas pipelines, pipe welding technology innovation, high-end plumbing materials research and development, as well as special tools technological innovation pipeline construction, pipeline corrosion protection science and technology research, science and technology research pipeline non-destructive testing, pipeline quality assessment, and research pipeline standards and so on. In the future, we will try to use new technology to create new business value and to contribute to research and product development for the pipeline.
22nd Floor, Royal Wing Tower, Long Champ International Building, No.9 Xiangfu Road, Changsha
No.9 Xiangfu Road,
This release was published on openPR.
Permanent link to this press release:
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Common Causes of 304 Stainless Steel Pipe Corrosion here
News-ID: 539158 • Views: 468
More Releases from Hunan Great Steel Pipe Co.,Ltd
How to Detect High Quality Coating Steel Pipe
Coating steel pipe is now a very high rate of a pipe, we racked our brains, in order to allow you to pick a better coating steel pipe to provide you with a test method. 1.Impact test In addition to the appropriate room temperature range, but also in accordance with the relevant national standards, the impact of its operation, in order to see the changes in the coating. 2. Visual inspection This is the
How to Strengthen the Stability of SSAW Steel Pipe
1) Small and medium-sized steel, wire rod, steel, medium diameter steel pipe, wire and wire rope, etc., can be stored in a well-ventilated shed, but must be under the pad. 2) Some small steel, thin steel, steel, silicon steel, small diameter or thin-walled steel pipe, all kinds of cold-rolled, cold-drawn steel and high prices, easy to corrode the metal products can be stored. 3) Storage of SSAW steel pipe(Spirally Submerged Arc Welded
Shortcomings of Duplex Stainless Steel Pipe
Compared with austenitic stainless steel pipe, duplex stainless steel pipe's shortcomings are as follows: 1) the universality of the application and multi-faceted as austenitic stainless steel, for example, its use temperature must be controlled at 250 degrees Celsius. 2) its plastic toughness than the austenitic stainless steel low, cold, hot processing technology and forming performance as austenitic stainless steel. 3) the existence of moderate temperature brittle area, the need for strict control of
Installation Method of Coating Composite Steel Pipe
General provisions 1, pipeline installation should have the following conditions ① construction drawings and other relevant technical documents complete, and has been technical to the end; ② the installation of the required plastic pipe, fittings and other visual inspection and check the product certification, specifications, variety and quantity; 2, the construction staff should understand the performance of coated steel pipe and the connection, to master the basic operating skills. 3, coated composite steel pipe should
More Releases for Stainless
Stainless Steel & Aluminium Supplier
Euro Steel is one of the largest suppliers of corrosion-resistant metals which includes stainless steel, aluminium, special steels and other metals. Euro Steel mainly operates in South Africa but is also active in the sub-Saharan region. The company provides plates, sheets, coils, valves, sections, pipes, tubes and many other forms of metal which are used commercially. The company is well known for its reliable services and high-quality products. Common Products Offered
What's driving the Stainless Steel Market Growth? Jindal Stainless, ArcelorMitta …
Europe driven by France, UK and Germany stainless steel market may witness high growth owing to positive application outlook in automotive industry owing to its high strength that allows for thinner containers, saving fuel costs, whereas its resistance to corrosion helps in minimizing the maintenance and cleaning costs. North America led by U.S. stainless steel market may witness significant growth by increasing application scope in medical, oil & gas and heavy
Stainless Steel Tube Market Global Forecast 2018| Studied By Outokumpu, Acerinox …
UpMarketResearch published an exclusive report on “ Stainless Steel Tube market” delivering key insights and providing a competitive advantage to clients through a detailed report. The report contains 128 pages which highly exhibits on current market analysis scenario, upcoming as well as future opportunities, revenue growth, pricing and profitability. This report focuses on the Stainless Steel Tube market, especially in North America, Europe and Asia-Pacific, South America,
Stainless Steel Market 2018-2024 | Global Key Player; Jindal Stainless, ArcelorM …
Strong application outlook in architecture and construction industry for sustainable building will stimulate stainless steel market growth. Stainless steel in a grain or polished finish helps in bringing natural light into the building by reducing overall energy consumption. Shift in focus towards aesthetic appearance of buildings will play a vital role in industry growth. Global Stainless-Steel Market may witness significant gains over forecast period owing to positive growth in the automotive
Difference Between Duplex Stainless and Industrial Stainless Steel Pipe
Difference between duplex Stainless steel pipe and industrial stainless steel pipe. 1) Comprehensive mechanical properties better industrial stainless steel pipe, especially plastic toughness, not as industrial stainless steel pipe as brittle sensitive. 2) In addition to stress corrosion resistance, the other resistance to local corrosion is better than industrial stainless steel pipe. 3) Cold processing technology and cold forming performance is much better than industrial stainless steel pipe. 4) Welding performance is also far
Stainless Steel Pipe and Industrial Stainless Steel Pipe
Stainless steel pipe is divided into two series: decorative stainless steel pipe(stainless steel pipe) and industrial stainless steel pipe. Decorative stainless steel pipe(stainless steel pipe(SS)): usually outside the wall will be bright tube, hence the name of thinking, stainless steel pipe(SS) is used for decorative purposes. Stainless steel pipe(SS) mainly used to decorate, such as railings, staircase handrails, windows, etc., the wall thickness is very thin. As with the industrial stainless