Press release
Automotive Cylinder Liner Market Analysis, Trends, Forecast, 2017-2027
Acts as a sliding surface: Cylinder liner acts as a sliding surface for piston rings and retains the lubricant within. They possess high anti-wear properties due to which there is less wear on piston rings.
Automotive cylinder liner acts as a heat transfer medium as it receives heat from piston and piston rings and it transfers it to the coolant.
Automotive cylinder liner acts as a sealing material as it does not allow compressed and combustion gas to escape from the cylinder due to which efficiency increases.
As the piston slides at a very high speed, high temperature and high pressure are created inside the cylinder. So it is necessary for the cylinder liner to withstand such high temperature and pressure. For this purpose, most of the automotive cylinder liners are made up of cast iron as it possesses excellent thermal and wear resistance properties. Also, it can bear high temperature and high pressure.
Market Trends, Drivers, Restraints
Various materials can be used for the manufacturing of automotive cylinder liner viz, cast iron, aluminum alloys, stainless steel, titanium alloy, etc. The selection of material for automotive cylinder liner depends upon various parameters such as ultimate tensile strength, maximum working pressure and temperature. Out of these materials, most of the manufacturers use cast iron as it is cheaper and possesses various properties. Aluminum liners are preferred where body is made up of aluminum.
Request For Report Sample: http://www.futuremarketinsights.com/reports/sample/rep-gb-3387
As the demand for automobile is increasing significantly, automotive cylinder liner market is expected to witness significant growth. Various automotive cylinder liner manufacturers are using advanced technologies to reduce the cost of production of cylinder liner. Cylinder liner is an important part of an engine as it also contributes towards the engine efficiency. Companies are trying to manufacture cylinder liners, which will reduce oil consumption. Also, many automotive cylinder liner manufacturers are investing in research and development so that it provides less friction. Mergers and acquisitions are the key strategies that have been adopted by leading companies in order to strengthen their position in the global OEM market and in the aftermarket segment to increase their market share.
Nowadays, many automobile manufacturers prefer lightweight material to be used in the assembly of an automobile. As automotive cylinder liner adds weight to the engine, overall weight of the automobile increases due to automotive cylinder liner. So, rather than using additional cylinder liner, many OEMs are using new technologies such as mirror bore coating technology and twin-wire arc spraying process, which eliminates the use of cylinder liner and allows improved performance of an engine. This acts as a threat to the growth of the global automotive cylinder liner market.
Market Segmentation
The global automotive cylinder liner market can be segmented by type, material, vehicle type used and application.
On the basis of cylinder liner type, the global automotive cylinder liner market is segmented as:
Dry Cylinder Liner
Wet Cylinder Liner
On the basis of application, the global automotive cylinder liner market is segmented as:
Diesel Engine
Gasoline Engine
On the basis of material used, the global automotive cylinder liner market is segmented as:
Cast iron cylinder liner
Aluminum alloy cylinder liner
Stainless steel cylinder liner
Titanium alloy cylinder liner
On the basis of vehicle type, the global automotive cylinder liner market is segmented as:
Light duty vehicle cylinder liner
Heavy duty vehicle cylinder liner
Request For TOC: http://www.futuremarketinsights.com/toc/rep-gb-3387
Market Participants
Examples of some of the market participants in the global automotive Cylinder Liner market identified across the value chain include
Federal-Mogul LLC
MAHLE GmbH
GKN China Holding Co. Ltd.
Melling Cylinder Sleeves
TPR CO. LTD.
Westwood Cylinder Liners Ltd.
Darton International, Inc.
ZYNP
LAYSTALL ENGINEERING COMPANY LIMITED.
ADVANCED SLEEVE
Kusalava.
Metallic Auto Liners.
India Pistons Ltd.
Cooper Corp.
Liners India Ltd
Browse Full Report: http://www.futuremarketinsights.com/reports/automotive-cylinder-liner-market
ABOUT US:
Future Market Insights (FMI) is a leading market intelligence and consulting firm. We deliver syndicated research reports, custom research reports and consulting services, which are personalized in nature. FMI delivers a complete packaged solution, which combines current market intelligence, statistical anecdotes, technology inputs, valuable growth insights, an aerial view of the competitive framework, and future market trends.
CONTACT:
Future Market Insights
616 Corporate Way, Suite 2-9018,
Valley Cottage, NY 10989,
United States
T: +1-347-918-3531
F: +1-845-579-5705
Email: sales@futuremarketinsights.com
Website: http://www.futuremarketinsights.com/
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Automotive Cylinder Liner Market Analysis, Trends, Forecast, 2017-2027 here
News-ID: 535439 • Views: …
More Releases from Future Market Insights
Global Lithium Ion Battery Separator Market Projected to Reach US$ 3,256.7 Milli …
The lithium-ion battery separator is a critical component in lithium-ion batteries, responsible for preventing short circuits and ensuring safe and efficient battery performance. It acts as a physical barrier between the positive and negative electrodes, allowing lithium ions to pass through while blocking the flow of electrons. With advancements in separator technology, these separators play a key role in enhancing battery capacity, cycle life, and overall safety in various applications,…
Industrial Drums Market on a Trajectory to Reach US$ 17.6 Billion by 2027, Bolst …
The Industrial Drums Market is experiencing a steady and promising trajectory, with an estimated value of US$ 12.5 billion in 2022, projected to escalate to US$ 17.6 billion by 2027 at a commendable Compound Annual Growth Rate (CAGR) of 7.1%. This growth is substantiated by a 6.6% CAGR in volume during 2022-27, as per Future Market Insights. Anticipated to expand 1.5 times within this period, the market presents alluring prospects for industry…
Supermarkets, Convenience Stores, and Eco-friendly Choices Fuel the Expansion of …
The metal cans market is predicted to grow at a CAGR of 5% over the forecast period, according to research by Future Market Insights. The industry's estimated value is expected to increase from US$ 56 Bn in 2023 to US$ 91.1 Bn by 2033.
The market for metal cans has been driven by the heightened demand for the product in food and beverages industry. Metal cans helps prolong shelf-life of perishable…
Folding IBCs Market Poised for Growth: Expected to Reach US$ 528 Million by 2027 …
The folding intermediate bulk containers (IBCs) market is on a growth trajectory, with an estimated value of US$ 418 million in 2022, projected to reach US$ 528 million by 2027, showcasing a Compound Annual Growth Rate (CAGR) of 4.8%. Remarkably, the China folding IBCs market defied initial pandemic-related skepticism and is anticipated to grow by 6.9% year on year in 2022. Despite global challenges, China's folding IBCs market is poised to contribute…
More Releases for Cylinder
Pneumatic Cylinder Market Expected to Reach $23,850.4 Million by 2030 | Product …
Pneumatic Cylinder Market Analysis By 2030
The intelligence report by Allied Market Research is the solid outcome of deep study and arduous assessment of numerous dynamics modeling the growth of the Pneumatic Cylinder market. Allied Market Research fosters a highly efficient team of experts, strategists, analysts, and industry specialists who provide proper frameworks and approaches to make efficient decisions. Their systematic analysis and insights help executives steer through their critical priorities…
Automotive Cylinder Liners & Cylinder Sleeves Market Professional Analysis Repor …
A cylinder is the central working part of a reciprocating engine or pump, the space in which a piston travels.[1] Multiple cylinders are commonly arranged side by side in a bank, or engine block, which is typically cast from aluminum or cast iron before receiving precision machine work. Cylinders may be sleeved (lined with a harder metal) or sleeveless (with a wear-resistant coating such as Nikasil). A sleeveless engine may…
Automotive Cylinder Liners & Cylinder Sleeves Market forecast 2019 – 2025 illu …
A cylinder is the central working part of a reciprocating engine or pump, the space in which a piston travels.[1] Multiple cylinders are commonly arranged side by side in a bank, or engine block, which is typically cast from aluminum or cast iron before receiving precision machine work. Cylinders may be sleeved (lined with a harder metal) or sleeveless (with a wear-resistant coating such as Nikasil). A sleeveless engine may…
Global Cylinder Liner Future Market 2018-2023 Darton, KSPG, Cummins, Westwood Cy …
The research report “Cylinder Liner Market Report 2018-2023” offers comprehensive knowledge on the Cylinder Liner market. It analyses the important factors of the Cylinder Liner based on present industry situations, Cylinder Liner demands, business strategies utilized by Cylinder Liner players and the future prospects from various angles in detail.
Industry analysis is a market assessment tool used by business and analysts to understand the complexity of an industry. Optical Pulse…
Cylinder Head & Cylinder Block Market Size 2017 Yanmar, Nemak, Cummins, Dongfeng …
Cylinder Head & Cylinder Block Market Research 2017
A market study ” Global Cylinder Head & Cylinder Block Market ” examines the performance of the Cylinder Head & Cylinder Block market 2017. It encloses an in-depth Research of the Cylinder Head & Cylinder Block market state and the competitive landscape globally. This report analyzes the potential of Cylinder Head & Cylinder Block market in the present and the future prospects from…
Cylinder Head & Cylinder Block Sales In Global Market During 2017 | Research Rep …
Researchmoz added Most up-to-date research on "Cylinder Head & Cylinder Block Sales In Global Market During 2017 | Research Report" to its huge collection of research reports.
In this report, the global Cylinder Head & Cylinder Block market is valued at USD XX million in 2016 and is expected to reach USD XX million by the end of 2022, growing at a CAGR of XX% between 2016 and 2022.
Geographically, this report…
