Press release
VAG Group also successful in Italy
VAG at ACCADUEO in Italy
The VAG Group received an overwhelmingly positive feedback from visitors for the products exhibited at the stand and the solutions provided in the areas of water, waste water and industrial applications. Besides giving various presentations on the subject of pressure management, VAG was the only exhibitor of a hollow-jet valve at the trade fair, which made this product a real highlight.
With more than three times as many customer contacts made at this trade fair, the sold-out ACCADUEO 2008 was a complete success for the VAG Group.
VAG-Armaturen GmbH
Carl-Reuther-Str. 1
68305 Mannheim
Germany
Press contact: Michaela Wagner
Phone: +49 621 – 749 1680
Fax: +49 621 – 749 1338
Email: M.Wagner@vag-armaturen.com
Internet: www.vag-armaturen.com
VAG-Armaturen GmbH is a German company with more than 130 years of experience in the design and manufacturing of heavy-duty valves for all kinds of water applications. With nearly 1,000 employees worldwide the valve manufacturer is a globally active company and is setting new standards as a solution and system provider in water and wastewater technology. With over 180 sales representatives, 11 subsidiaries and 3 production facilities VAG is at home around the world.
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release VAG Group also successful in Italy here
News-ID: 46540 • Views: …
More Releases from VAG Armaturen
New air valve for sewage applications
VAG-Armaturen GmbH (vag-armaturen.com/en/) has extended its product range by an automatic air valve for sewage applications. The VAG FLOWJET Air Valve can serve as both an aeration valve for the draining of sewage water lines and a deairing valve when sewage water lines are filled. It is also suitable for continuous ventilation under system pressure during operation.
The special features of the FLOWJET Air Valve are its corrosion-free and incrustation-free…
VAG extends its knife-gate valve range
VAG-Armaturen GmbH (vag-armaturen.com/en/) has extended its product range of resilient seated knife gate valves by nominal widths DN 800 and DN 1000, making the VAG ZETA® Knife Gate Valve available in all commonly used nominal sizes which now range from DN 50 to DN 1000. Depending on its nominal width, the new VAG ZETA® Knife-Gate Valve can now be used for working pressures of up to 10 bar.
This valve’s…
Control valves used for bottom outlets in dams and in hydro-power plants
VAG-Armaturen (vag-armaturen.com/en/) - Normally butterfly valves are used as on-off valves and are usually installed in a valve chamber on the water side of bottom outlet lines in dams or in gravity lines leading to water treatment plants or hydro-power plants. In the best case the butterfly valves are assembled with brake and lift cylinders, working as pipe brake devices for emergency quick closing by lever and weight in case…
Replacement of valves in the gate valve house of the Schwammenauel dam and hydro …
The Rur dam with the Schwammenauel hydropower station is located in the Nordeifel mountains near the city of Heimbach. With its storage volume of 203 million m³ it is one of Germany's largest dams. After more than 65 years of service, the valves at the bottom outlet had to be replaced. The old plunger valves were replaced by hollow jet valves with a much higher capacity.
The Rur dam and…
