openPR Logo
Press release

Core advantages (compared to traditional fuel vehicles with water heating defrosting and low-pressure defrosting)

07-10-2026 11:14 PM CET | Logistics & Transport

Press release from: ABNewswire

Core advantages (compared to traditional fuel vehicles with

1. Compared to traditional engine water heating defrosting (fuel powered buses)

No engine dependency

Pure electric vehicles have no engine waste heat, and high-pressure defrosting is the only independent heating solution; The vehicle can defrost normally during idle, parking charging, and standby. In winter, the defrosting during parking at the station is not limited by engine start stop.

Extremely fast startup speed

Fuel powered cars need to heat up for 3-5 minutes before there is hot air; High voltage PTC produces high-temperature hot air within 30 seconds of startup, increasing defrosting efficiency by more than 4 times during cold start.

Simple system structure and low failure rate

Dry type models have no hidden dangers of engine water pipes, thermostats, warm air water valves, and antifreeze leakage, with fewer pipelines and simple maintenance;

Uniform temperature control without damaging the glass

PTC automatic constant temperature, with a fluctuation of hot air temperature difference of less than or equal to plus-minus 2 , to avoid the risk of windshield cracking caused by traditional engine sudden cold and hot changes.

2. Compare low-voltage 24V resistance wire defrosting

High heating power and defrosting efficiency

The power upper limit of low-voltage models is only 2-3kW, and large buses have weak defrosting capabilities; High voltage models can reach 10-30kW and are suitable for large-area front windshields of 12 meter and 18 meter articulated buses.

Lower energy consumption and higher heating efficiency

PTC electric thermal conversion efficiency>95%, ineffective heating without resistance wire; Under the same heating capacity, the high-voltage line current is smaller, the harness loss is lower, and the winter power consumption of the whole vehicle is reduced by 20% -30%.

Significant increase in security level

PTC self limiting temperature never turns red, eliminating the risk of resistance wire overheating and fire;

Standard HVIL high voltage interlock, insulation monitoring, multi-stage overheating fuse, IP67 waterproof and dustproof;

Double independent temperature protection, forced power-off when the fan stops running, and far superior anti dry burning performance compared to resistive type.

3. Comprehensive advantages of the product itself

Energy saving and energy-saving, extending winter battery life

Intelligent segmented power regulation, no need for continuous operation at full power; Cycling in high-altitude regions can save thousands of kilowatt hours of electricity per month in winter.

Long service life and resistance to harsh working conditions

PTC ceramics have no oxidation or erosion issues, with an average MTBF time between failures exceeding 12000 hours; The anti-corrosion of the shell has passed the 720 hour neutral salt spray test and is suitable for high humidity salt spray environments in northern ice and snow, coastal areas.

Flexible installation and high integration

Dry independent box can be arranged on both sides of the instrument panel and inside the air duct; The water heating model can integrate a vehicle thermal management module, adapt to various types of bus chassis, and support customization of multiple air outlet ducts.

Environmentally friendly, reliable, no combustion, no exhaust, no risk of fuel leakage, zero emissions; No open flames, it is safer to use in a closed environment at bus stops.

Intelligent adaptation to vehicle standard CAN2.0 communication, compatible with mainstream bus controllers, supports remote monitoring of defrosting status and fault reporting for fleets, and is compatible with intelligent buses and autonomous driving buses.

Applicable vehicle models

6-18 meter pure electric city buses, tourist buses, commuter buses, hybrid buses, fuel cell buses, especially mandatory standard for operating vehicles in the high-altitude regions of Northeast and Northwest China.

Media Contact
Company Name: Hebei Nanfeng Automobile Equipment (Group) Co., Ltd.
Email:Send Email [https://www.abnewswire.com/email_contact_us.php?pr=core-advantages-compared-to-traditional-fuel-vehicles-with-water-heating-defrosting-and-lowpressure-defrosting]
Country: China
Website: https://www.hvh-heater.com/

Legal Disclaimer: Information contained on this page is provided by an independent third-party content provider. ABNewswire makes no warranties or responsibility or liability for the accuracy, content, images, videos, licenses, completeness, legality, or reliability of the information contained in this article. If you are affiliated with this article or have any complaints or copyright issues related to this article and would like it to be removed, please contact retract@swscontact.com



This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Core advantages (compared to traditional fuel vehicles with water heating defrosting and low-pressure defrosting) here

News-ID: 4574376 • Views:

More Releases from ABNewswire

What Battery Buyers Prioritize in 2026 - Industry Trends and Best Practices
What Battery Buyers Prioritize in 2026 - Industry Trends and Best Practices
Battery technology has become a critical part of modern infrastructure. From connected devices and healthcare equipment to industrial automation and backup power systems, batteries are now expected to deliver far more than energy alone. Buyers increasingly evaluate suppliers based on manufacturing consistency, quality assurance, environmental responsibility, and the ability to support long-term business growth. As market expectations continue to evolve, manufacturers face growing pressure to improve transparency, production standards, and operational
MIA Dynamics USA Introduces Smart Electric Mobility Solutions for Modern Golf Course Operations
MIA Dynamics USA Introduces Smart Electric Mobility Solutions for Modern Golf Co …
MIA Dynamics USA introduces the MIA FOUR, an all-terrain electric mobility platform engineered to help golf courses improve efficiency, sustainability, and daily operations. Designed for maintenance crews, rangers, security, and hospitality staff, the zero-emission platform delivers quiet performance, low operating costs, extended range, and flexible fleet solutions for modern golf facilities. Golf courses across the country are embracing innovative technologies to improve operational efficiency, reduce environmental impact, and elevate the member
US LLC Light Launches Compliance-First Platform for Non-U.S. Solo Founders
US LLC Light Launches Compliance-First Platform for Non-U.S. Solo Founders
The new platform connects U.S. LLC formation with a structured yearly compliance workflow designed for international freelancers, consultants, agency owners, and independent digital entrepreneurs. ST. PETERSBURG, Fla. - US LLC Light, a specialized U.S. LLC formation and compliance platform for international entrepreneurs, has opened Founding Client Access as it prepares for its public launch. Created specifically for non-U.S. solo founders, the platform is designed to address a problem that often begins after
New Research Reveals Why Enterprise AI Projects Fail Without Effective User Documentation
New Research Reveals Why Enterprise AI Projects Fail Without Effective User Docu …
Image: https://www.abnewswire.com/upload/2026/07/499d8f16e7dc4332d20881852d063eb0.jpg Why Enterprise AI Fails Without Proper User Documentation I've watched more Enterprise AI rollouts stall than I'd like to admit, and almost none of them died because the model was bad. They died quietly, usually about three months after launch, when nobody was logging in and everyone had drifted back to the spreadsheet they already trusted. Here's the number that stopped me cold. MIT's Project NANDA studied the state of AI

All 5 Releases


More Releases for PTC

PTC Heating Ceramic Market Size and Forecast
𝐔𝐒𝐀, 𝐍𝐞𝐰 𝐉𝐞𝐫𝐬𝐞𝐲- The global PTC Heating Ceramic Market is expected to record a CAGR of XX.X% from 2024 to 2031 In 2024, the market size is projected to reach a valuation of USD XX.X Billion. By 2031 the valuation is anticipated to reach USD XX.X Billion. The PTC (Positive Temperature Coefficient) heating ceramic market is experiencing notable growth due to its extensive use in various applications, including consumer electronics, automotive,
PTC Heaters Market Size 2024 to 2031.
Market Overview and Report Coverage PTC heaters, or Positive Temperature Coefficient heaters, are self-regulating heating elements used in various applications like automotive, appliances, and industrial equipment. They provide efficient and consistent heating by automatically adjusting their power output based on temperature changes. The future outlook for the PTC heaters market is bright, with a projected CAGR of 19.40% during the forecasted period. This growth can be attributed to the increasing
Ceramic PTC and Polymer PTC Market to Witness Huge Growth by 2029 | Polytronics, …
The Ceramic PTC and Polymer PTC report compiles the market information depending upon market development and growth factors, optimizing the growth path. In addition, it highlights the strategies and market share of the leading vendors in the particular market. The report follows a robust research methodology model that helps to make informed decisions. It obtains both qualitative and quantitative market information supported by primary research. The Ceramic PTC and Polymer PTC
Rapid Sheet Metal Introduces “SolidQuote PTC Creo”
Free & simple instant sheet metal quoting add-in for PTC Creo users Nashua, NH – Rapid Sheet Metal, a dedicated rapid prototype sheet metal shop, is excited to announce the release of SolidQuote for PTC Creo. SolidQuote allows product development engineers to quote and order sheet metal parts and assemblies instantly. Recognizing many mechanical engineers and designers don’t have the time to sit around waiting for quotes, Rapid has developed
Pipeline Technology Conference, ptc moves to Berlin
Having grown up as part of HANNOVER MESSE, Europe’s leading pipeline conference and trade show, Pipeline Technology Conference (ptc), will move to the capital Berlin next year. The ptc has grown steadily over the years and, in addition to the conference itself and the accompanying exhibition, it is now also directly followed by several special workshops and in-depth seminars. International participants from over 30 different countries use the opportunity to
euroscript to resell PTC leading PLM solutions
New solution offering to drive shortened project cycles and cost savings Bertrange, 29 July 2009 – euroscript International, a leader in providing global solutions in content lifecycle management, announced today that it has joined the PTC (Nasdaq: PMTC) Advantage Network Program as Enterprise Solution Provider – Gold. The partnership is especially significant for manufacturers who already benefit from euroscript’s solutions and services in the field of technical authoring, documentation, translation and