Automotive Jounce Bumper Research: the global Automotive Jounce Bumper market size is projected to reach USD 3.38 billion by 2031

QY Research Inc. (Global Market Report Research Publisher) announces the release of 2025 latest report "Automotive Jounce Bumper- Global Market Share and Ranking, Overall Sales and Demand Forecast 2025-2031". Based on current situation and impact historical analysis (2020-2024) and forecast calculations (2025-2031), this report provides a comprehensive analysis of the global Wire Drawing Dies market, including market size, share, demand, industry development status, and forecasts for the next few years.

The global market for Automotive Jounce Bumper was estimated to be worth US$ 2577 million in 2024 and is forecast to a readjusted size of US$ 3383 million by 2031 with a CAGR of 3.9% during the forecast period 2025-2031.

【Get a free sample PDF of this report (Including Full TOC, List of Tables & Figures, Chart)】
https://www.qyresearch.com/reports/4914838/automotive-jounce-bumper



Automotive Jounce Bumper Market Summary



An automotive jounce bumper (also known as a bump stop or jounce cushion) is a crucial component in a vehicle's suspension system. It is designed to absorb shock and prevent damage when the suspension reaches the end of its travel, such as during compression (when the vehicle is lowered or when weight is added) or when it encounters a large bump or obstacle.

There are three main materials for buffer blocks: rubber, polyurethane material, and thermoplastic polyurethane elastomer (TPU), with rubber gradually being replaced. At present, the buffer blocks of vehicles are mainly made of polyurethane materials, which have the advantages of small mass, large deformation, and aging resistance. They have good nonlinear characteristics and can better absorb loads. However, with the increase of vehicle load, polyurethane materials begin to struggle to meet the increasingly high absorption energy requirements. TPU, which has good resilience, toughness, and aging resistance, is a mature environmentally friendly material that can better improve the absorption energy of buffer blocks.

According to the new market research report "Global Automotive Jounce Bumper Market Report 2025-2031", published by QYResearch, the global Automotive Jounce Bumper market size is projected to reach USD 3.38 billion by 2031, at a CAGR of 3.9% during the forecast period.

Figure00001. Global Automotive Jounce Bumper Market Size (US$ Million), 2019-2030



Above data is based on report from QYResearch: Global Automotive Jounce Bumper Market Report 2024-2030 (published in 2024). If you need the latest data, plaese contact QYResearch.

Figure00002. Global Automotive Jounce Bumper Top 19 Players Ranking and Market Share (Ranking is based on the revenue of 2023, continually updated)



Above data is based on report from QYResearch: Global Automotive Jounce Bumper Market Report 2024-2030 (published in 2024). If you need the latest data, plaese contact QYResearch.

According to QYResearch Top Players Research Center, the global key manufacturers of Automotive Jounce Bumper include BASF, KYB, Vibracoustic, Trelleborg, DONGYANG P&C, etc.

In 2024, the global top five players had a share approximately 76.0% in terms of revenue.

Figure00003. Automotive Jounce Bumper, Global Market Size, Split by Product Segment

Based on or includes research from QYResearch: Global Automotive Jounce Bumper Market Report 2024-2030.



Based on or includes research from QYResearch: Global Automotive Jounce Bumper Market Report 2024-2030.

In terms of product type, currently Polyurethane Material is the largest segment, hold a share of 80.2%.

In terms of product application, currently Passenger Cars is the largest segment, hold a share of 66.5%.

Key Market Trend Analysis:

I. Passenger Car Market

Overall, the passenger car market is placing greater emphasis on ride comfort and reducing noise, vibration, and harshness (NVH):

1. Improving Comfort: Growing consumer demand for a smoother, more comfortable ride is driving innovation in suspension systems. Shock absorbers, as a crucial component of the suspension system, are designed to enhance comfort by absorbing impact and reducing harshness. There is increasing emphasis on developing shock absorbers that reduce vibration and enhance the overall ride experience.

2. Improving NVH: Improved materials and designs in shock absorbers help reduce NVH levels. As manufacturers strive to meet consumer expectations for a quieter, more refined ride, shock absorbers are playing an increasingly important role in reducing noise and vibration, especially on rough roads.

3. Demand from Electric Vehicles (EVs): As the global automotive market shifts toward electric vehicles, shock absorbers are becoming increasingly important in EV design. EVs, with their heavy battery packs and varying weight distribution, require specialized suspension components to maintain comfort and safety. Shock absorbers are designed to handle the additional weight of batteries and enhance the overall ride quality of electric vehicles.

4. Optimizing Electric Vehicle Suspension: The unique weight characteristics of electric vehicles, such as battery placement, have led to changes in suspension design. Shock absorbers are being developed to accommodate these new vehicle dynamics, helping to improve stability and comfort despite the added weight of batteries and other EV-specific components.

Commercial Vehicles: Commercial vehicles often operate under extreme conditions, including heavy loads, rough terrain, and long driving times. Therefore, durability and service life are key factors for shock absorbers in this sector. Manufacturers are working to develop shock absorbers that can withstand higher impact forces, increased wear, and extreme environmental conditions.

1. Extending Service Life: Commercial vehicles are expected to have longer service lives, and so too will the lifespan of their internal components. Shock absorbers designed for commercial vehicles are manufactured using high-strength materials to extend their service life, reducing maintenance costs and downtime.

2. Active and Semi-active Suspension Systems: Advanced suspension systems, such as active and semi-active suspensions, are increasingly being integrated into commercial vehicles to improve ride comfort and vehicle stability. Shock absorbers are being developed to work with these systems, providing additional impact absorption and stability control.

3. Air Suspension Systems: Air suspension systems are becoming increasingly common in commercial vehicles, particularly trucks and buses. Air suspensions can adjust ride height and improve load management. Shock absorbers are designed to complement these air suspension systems, providing improved shock absorption, a smoother ride, and greater control under varying load conditions.



The report provides a detailed analysis of the market size, growth potential, and key trends for each segment. Through detailed analysis, industry players can identify profit opportunities, develop strategies for specific customer segments, and allocate resources effectively.

The Automotive Jounce Bumper market is segmented as below:
By Company
BASF
KYB
Vibracoustic
Trelleborg
DONGYANG P&C
BASF INOAC
Shanghai Carthane
Anhui Zhongding Holdings (Group)
Bonpora Parts
AMP
AirBoss Engineered Products
Changchun Shifa
Zhejiang Sanlee
Pleiger Group
Shandong SumeiAuto Parts
Zhuzhou Times New Material Technology
Chongqing Linghui
Poly Labs
Guangdong Meirun

Segment by Type
Polyurethane Material
Others Material

Segment by Application
Passenger Cars
Commercial Vehicles

Each chapter of the report provides detailed information for readers to further understand the Automotive Jounce Bumper market:

Chapter 1: Introduces the report scope of the Automotive Jounce Bumper report, global total market size (valve, volume and price). This chapter also provides the market dynamics, latest developments of the market, the driving factors and restrictive factors of the market, the challenges and risks faced by manufacturers in the industry, and the analysis of relevant policies in the industry. (2020-2031)
Chapter 2: Detailed analysis of Automotive Jounce Bumper manufacturers competitive landscape, price, sales and revenue market share, latest development plan, merger, and acquisition information, etc. (2020-2025)
Chapter 3: Provides the analysis of various Automotive Jounce Bumper market segments by Type, covering the market size and development potential of each market segment, to help readers find the blue ocean market in different market segments. (2020-2031)
Chapter 4: Provides the analysis of various market segments by Application, covering the market size and development potential of each market segment, to help readers find the blue ocean market in different downstream markets.(2020-2031)
Chapter 5: Sales, revenue of Automotive Jounce Bumper in regional level. It provides a quantitative analysis of the market size and development potential of each region and introduces the market development, future development prospects, market space, and market size of each country in the world..(2020-2031)
Chapter 6: Sales, revenue of Automotive Jounce Bumper in country level. It provides sigmate data by Type, and by Application for each country/region.(2020-2031)
Chapter 7: Provides profiles of key players, introducing the basic situation of the main companies in the market in detail, including product sales, revenue, price, gross margin, product introduction, recent development, etc. (2020-2025)
Chapter 8: Analysis of industrial chain, including the upstream and downstream of the industry.
Chapter 9: Conclusion.

Benefits of purchasing QYResearch report:

Competitive Analysis: QYResearch provides in-depth Automotive Jounce Bumper competitive analysis, including information on key company profiles, new entrants, acquisitions, mergers, large market shear, opportunities, and challenges. These analyses provide clients with a comprehensive understanding of market conditions and competitive dynamics, enabling them to develop effective market strategies and maintain their competitive edge.

Industry Analysis: QYResearch provides Automotive Jounce Bumper comprehensive industry data and trend analysis, including raw material analysis, market application analysis, product type analysis, market demand analysis, market supply analysis, downstream market analysis, and supply chain analysis.

and trend analysis. These analyses help clients understand the direction of industry development and make informed business decisions.

Market Size: QYResearch provides Automotive Jounce Bumper market size analysis, including capacity, production, sales, production value, price, cost, and profit analysis. This data helps clients understand market size and development potential, and is an important reference for business development.

Other relevant reports of QYResearch:
Global Automotive Jounce Bumper Market Outlook, In‐Depth Analysis & Forecast to 2031
Global Automotive Jounce Bumper Sales Market Report, Competitive Analysis and Regional Opportunities 2025-2031
Global Automotive Jounce Bumper Market Research Report 2025
Automotive Jounce Bumper- Global Market Share and Ranking, Overall Sales and Demand Forecast 2025-2031
Global Automotive Rubber Jounce Bumpers Sales Market Report, Competitive Analysis and Regional Opportunities 2025-2031
Automotive Rubber Jounce Bumpers- Global Market Share and Ranking, Overall Sales and Demand Forecast 2025-2031
Global Automotive Rubber Jounce Bumpers Market Research Report 2025
Automotive Polyurethane Jounce Bumper - Global Market Share and Ranking, Overall Sales and Demand Forecast 2025-2031
Global Automotive Polyurethane Jounce Bumper Market Outlook, In‐Depth Analysis & Forecast to 2031
Global Automotive Polyurethane Jounce Bumper Sales Market Report, Competitive Analysis and Regional Opportunities 2025-2031
Global Automotive Polyurethane Jounce Bumper Market Research Report 2025
Automotive Polyurethane Jounce Bumper- Global Market Share and Ranking, Overall Sales and Demand Forecast 2025-2031
Global Automotive Jounce Bumper Market Insights, Forecast to 2030
Global and India Automotive Jounce Bumper Market Report & Forecast 2024-2030
Global Automotive Jounce Bumper Market Research Report 2024
Automotive Jounce Bumper - Global Market Share and Ranking, Overall Sales and Demand Forecast 2024-2030
Global and United States Automotive Rubber Jounce Bumpers Market Report & Forecast 2024-2030
Global Automotive Rubber Jounce Bumpers Market Insights, Forecast to 2030
Global Automotive Rubber Jounce Bumpers Market Research Report 2024
Automotive Rubber Jounce Bumpers - Global Market Share and Ranking, Overall Sales and Demand Forecast 2024-2030

Contact Us:
If you have any queries regarding this report or if you would like further information, please contact us:
QY Research Inc.
Add: 17890 Castleton Street Suite 369 City of Industry CA 91748 United States
EN: https://www.qyresearch.com
Email: global@qyresearch.com
Tel: 001-626-842-1666(US)
JP: https://www.qyresearch.co.jp

About Us:
QYResearch founded in California, USA in 2007, which is a leading global market research and consulting company. Our primary business include market research reports, custom reports, commissioned research, IPO consultancy, business plans, etc. With over 18 years of experience and a dedicated research team, we are well placed to provide useful information and data for your business, and we have established offices in 7 countries (include United States, Germany, Switzerland, Japan, Korea, China and India) and business partners in over 30 countries. We have provided industrial information services to more than 60,000 companies in over the world.

This release was published on openPR.