openPR Logo
Press release

ENEX Power Plant Commissioned in Sakhalin

12-08-2016 06:58 PM CET | Energy & Environment

Press release from: BPC Engineering

BPC Engineering completed a project for mini CHP plant installation in Nysh village, Sakhalin Region. The plant consists of a 600-kW ENEX 600 power system and a UT-65 heat recovery system with 0.75MW of thermal output as the main source of heat supply. Two hot-water boilers, 0.42MW each, supply additional thermal energy during peak demand. The equipment is arranged in a single building located in the territory of the village. Within the framework of the project BPC Engineering manufactured the ENEX power system and performed equipment supply, installation supervision and the commissioning of the mini CHP plant.
The installation of the new CHP plant was motivated by laying a new gas pipeline to the village. The plant replaced an outdated diesel power plant that was the reason for multiple outages in the remote community. The Customer – Nogliksk District Administration – chose ENEX power system as being the most reliable, efficient and proven equipment in the conditions of the Far East. The CHP plant runs on the natural gas producing 1.2kW of thermal energy per each 1kW of power. Modular design of the power system comprising 3x 200-kW microturbine modules ensures high load flexibility for daily peaks. Each module is serviced independently allowing for the continuous operation of the plant. Highly automated ENEX power systems do not require constant presence of technical personnel with maintenance intervals of 8 000 hours. This CHP plant also provides significant savings for the community since it has small quantity of moving parts and does not use lubricants and coolants for operation reducing the cost of generated power by almost 10 times in comparison with 1 kilowatt generated by a diesel engine. With low noise (60 dBA at 10-m distance) and low greenhouse emissions (CO and NOx less than 9 ppm) the plant complies with the most stringent environmental requirements.
As for today, the mini CHP plant covers all needs in electricity and heat of the 500-people community. The generated thermal power is used for hot water supply and heating of a school, administration building, surrounding houses and other facilities. The obsolete diesel engines serve as a backup source. The new facility ensures continuous and reliable energy supply providing new opportunities for the development of railway communications on the Sakhalin Island.

BPC Engineering is an integrated engineering company specializing in the construction and operation of distributed energy systems. As an EPC company, BPC Engineeing design, install and operate Capstone microturbine-based distributed power plants with power output range from 10-15 kilowatts to 20 megawatts. As an OEM at own factory in Tutaev, Yaroslavl region, company manufactures microturbine units and packaged power plants based on Capstone microturbines and Dresser-Rand gas turbines under own brand ENEX (Energy Expert) as well as under brand COMPEX (Compressor Expert) produces screw, reciprocating, centrifugal gas compressors; equipment for associated and flare gas treatment; wellhead gas compression systems for legacy wells operation extension; single-stage, low-temperature and scalable desulfurization systems; zero-flaring systems, gas reinjection, LPG and aromatics extraction; waste-to-energy systems based on proprietary fast pyrolysis technology.

BPC Engineering
Bld. 2, 50A/8 Zemlyanoy Val St., Moscow, Russia, 109028
Tel: +7 (495) 780-31-65
Fax: +7 (495) 780-31-67
www.bpcenergy.ru
PR Manager Alena Serdukova

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release ENEX Power Plant Commissioned in Sakhalin here

News-ID: 392999 • Views: 614

More Releases from BPC Engineering

Power plant ENEX 65 has been shipped to Uzbekistan
BPC Engeneering has shipped equipment for APG utilization project on Uzbekneftegaz oilfields. The project is carried out under the World Bank-led Global Gas Flaring Reduction Partnership (GGFR). Power plant ENEX 65 will be placed on Turtsari oilfield in Qashqadaryo province. The equipment is designed for the utilization of APG from the flare system to generate electrical energy for the oil field's own needs. A gas containing 0.05% of H2S will
Microturbine CHP Plant Provides Power to Ski Resort in Belarus
BPC Engineering commissioned an advanced CHP plant for Silichi Ski Resort located in the Minsk Region, Belarus. The plant generates heat and electricity for a restaurant, hotel complex and other facilities of the resort. Within the framework of the project BPC Engineering performed equipment supply, installation supervision and commissioning. The new mini CHP plant runs in parallel with the utility grid that covers peak loads. The plant consists of a 65-kW
BPC Engineering to Manufacture COMPEX Compressors for Cryogenmash Laboratory Com …
BPC Engineering signed a contract to manufacture and supply two COMPEX reciprocating compressor stations for Cryogenmash Laboratory Complex located in the Moscow Region. The equipment will be a part of a pilot natural gas liquefaction system developed by the customer within the framework of import phase-out program. In accordance with the contract BPC Engineering will manufacture a COMPEX 2Y3.5 reciprocating compressor station with capacity of 280-680 nm3/hr and a 90-kW drive
BPC Engineering Was Awarded with Prize for the Best Distributed Generation Proje …
BPC Engineering won the International Award «Distributed Power Generation – Great Achievements» in the category «Advanced Development in the Sphere of Power Industry». The award ceremony was conducted in Moscow on December 1, 2016. The «Golden Lightning» prize and honorary diploma were presented to Alexander Skorokhodov, BPC Engineering's CEO, by Sergey Esyakov, the First Deputy Chairman of the State Duma Energy Committee. 52 projects from Russia, Kazakhstan, Lithuania and Belarus participated

All 5 Releases


More Releases for CHP

Micro Combined Heat & Power (Micro CHP) Market 2022 | Detailed Report
The Micro Combined Heat & Power (Micro CHP) research report combines vital data incorporating the competitive landscape, global, regional, and country-specific market size, market growth analysis, market share, recent developments, and market growth in segmentation. Furthermore, the Micro Combined Heat & Power (Micro CHP) research report offers information and thoughtful facts like share, revenue, historical data, and global market share. It also highlights vital aspects like opportunities, driving, product scope,
Micro Chp Market Size & Growth Analysis Report, 2019-2025
The Global Micro Chp Market size is expected to grow at an annual average of 13.3% during 2019-2025. Carbon emission technology is a major factor driving the market. Micro CHP technology helps reduce electricity costs and is also ideal for boiler replacement. The following players are covered in this report: By Type Engine-based Fuel Cell-based By Technology Internal Combustion Engine Rankine Cycle Engine Stirling Engine PEMFC (Proton Exchange Membrane Fuel Cell) SOFC (Solid Oxide Fuel Cell) By Application Residential Commercial A full report of
CHP (Combined heat and power) Installation Market Report, 2027
Key Highlights Combined heat and power (CHP) installation capacities have increased on the back of the growing inclination of governments in numerous countries to increase the share of CHP in modern energy generation. The drive for CHP, also called cogeneration, installation stems from the urge to meet the burgeoning needs of electricity. Advances in CHP configurations have reduced the cost and complexity of their deployment in manufacturing facilities, especially in developed nations,
Global Micro CHP Market Research and Forecast, 2018-2023
Global Micro CHP Market Industry Analysis, Market Size, Market Player, Opportunities and Forecast- 2018-2023 | Manufacturer- Aegis Energy Services, LLC, General Electric Co., and Honda Motor Co., Ltd. According to OMR analysis, the global micro CHP (combined heat and power) market is estimated to expand at a significant CAGR during the forecast period (2018-2023). Factors motivating the growth of this market is increasing government support & initiative for generation of renewable
Micro CHP Market Share, Supply, Analysis and Forecast to 2023
Global Micro CHP Industry New Study On “2019-2023 Micro CHP Market Global Key Player, Demand, Growth, Opportunities and Analysis Forecast” Added to Wise Guy Reports Database Micro combined heat and power (micro-CHP) is a combined technology which generates heat and electricity by using the fuel cell or through an internal combustion engine. The produced energy supports in providing power in individual homes, complexes and buildings. Heat is the main output of a
Combined Heat and Power (CHP) Installation Market| combined heat and power, chp …
In order to study the various trends and patterns prevailing in the concerned market, Market Research Reports Search Engine (MRRSE) has included a new report titled “CHP installation market” to its wide online database. This research assessment offers a clear insight about the influential factors that are expected to transform the global market in the near future. This research study analyzes the market for CHP installation in terms of revenue (US$