openPR Logo
Press release

Plastic Coatings Market - Global Industry Analysis, Size, Share, Growth, Trends and Forecast 2016 – 2024

11-08-2016 02:50 PM CET | Industry, Real Estate & Construction

Press release from: TMR – Research Reports

Plastic Coatings Market - Global Industry Analysis, Size,

Plastic coatings are used in various applications in different sectors such as automotive, oil & gas, building & construction, electronics, aerospace and defense. Some Functional uses of plastic coatings include corrosion inhibition, abrasion resistance, thermal resistance, chemical resistance, UV resistance, lubrication, mechanical property enhancement, surface finish, and esthetics. Implementation of higher number of environmentally-friendly regulations is expected to encourage manufacturers in the coatings industry to opt for water-based plastic coatings.

Plastic coatings can be classified based on their application into architectural coatings, industrial coatings, and special purpose coatings. Architectural coatings account for around 50% share of the global coatings industry. These include consumer paints. Industrial coatings are used at the time of manufacture of products. Special coatings comprise a wide range of functional coatings and can be sub-divided into automotive refinish coatings, industrial maintenance coatings, traffic marking paints, and marine paints. Plastic coatings can be applied to substrates in many ways. These include chemical & electrochemical techniques, spraying, roll-to-roll coating, and spin coating.

Download And Get Sample PDF File Of Plastic Coatings Industry : http://www.transparencymarketresearch.com/sample/sample.php?flag=B&rep_id=16592

Polyurethane, polyester, epoxy, and PTFE are the most widely used plastic coatings. PU coatings are recommended for application on surfaces requiring good wear resistance along with excellent chemical & physical resistance. Epoxy coatings are harder, more durable, and possess higher compression strength than polyurethanes; however, they have lower resistance to abrasion and low freezing temperature. Polyester coatings are widely used to provide wear & tear resistance, water resistance, and chemical resistance to wood. They also possess the fastest curing time. PTFE coatings have high temperature and chemical resistance and low surface energy. Thus, they are ideal materials to be used in ‘non-stick’ applications. Chlorinated rubber coatings are employed in marine environments, as they are resistant to salts, alkalis, mineral oils, moisture, and fungal growth. Various plastics incorporated with carbon particles or metallic particles are used in conductive coatings or EMI shielding. Other applications of plastic coatings include barrier protection, antiglare, super hydrophobicity, anti-contamination, and esthetic finishes.

Increase in demand for plastic coatings in the automotive end-use segment is anticipated to drive the plastic coatings market in the next few years. Europe accounts for significant share of the plastic coatings market due to the rise in demand from automobile manufacturers concentrated in the region. Consumption of protective plastic coatings is high in Asia Pacific primarily due to the prevalence of hot and wet climatic conditions and increase in oil & gas and mining activities in the region. Plastic coatings are predominantly used in China due to the rapid growth of the civil and marine industries in the country. The per capita consumption of plastic coatings in India remains low with only architectural paints being widely used. These factors coupled with renewed focus on industrialization in India under the ‘Make in India’ campaign make plastic coatings one of the most highly attractive growth markets in Asia Pacific. Japan and Taiwan are key players in the plastic coatings market as they are one of the leading manufacturers of electricals and electronics. The outlook of the plastic coatings market in the U.S appears positive, due to the recovery of construction and automobile industries from the economic recession of 2008. In addition, water based coatings are expected to become increasingly used as manufacturers seek solutions to the recent environmental regulations against polluting petroleum based coatings.

Browse Market Research Report with ToC & Free Analysis : http://www.transparencymarketresearch.com/plastic-coatings-market.html

Key players operating in the plastic coatings market are Bayer SE, PPG Industries, Eastman, Azko Nobel, Sherwin-Williams, Bayer A.G, Axalta Coating Systems, Kansai Painting Co,. Ltd, Asian Paints, and RPM International Inc.

The report offers a comprehensive evaluation of the market. It does so via in-depth qualitative insights, historical data, and verifiable projections about market size. The projections featured in the report have been derived using proven research methodologies and assumptions. By doing so, the research report serves as a repository of analysis and information for every facet of the market, including but not limited to: Regional markets, technology, types, and applications.

The study is a source of reliable data on:
Market segments and sub-segments
Market trends and dynamics
Supply and demand
Market size
Current trends/opportunities/challenges
Competitive landscape
Technological breakthroughs
Value chain and stakeholder analysis

About Us

Transparency Market Research (TMR) is a market intelligence company, providing global business information reports and services. Our exclusive blend of quantitative forecasting and trends analysis provides forward-looking insight for thousands of decision makers. TMR's experienced team of Analysts, Researchers, and Consultants, use proprietary data sources and various tools and techniques to gather and analyze information.

Our data repository is continuously updated and revised by a team of research experts, so that it always reflects the latest trends and information. With a broad research and analysis capability, Transparency Market Research employs rigorous primary and secondary research techniques in developing distinctive data sets and research material for business reports.

Contact

Transparency Market Research
90 State Street, Suite 700
Albany, NY 12207
Tel: +1-518-618-1030
USA - Canada Toll Free: 866-552-3453
Email: sales@transparencymarketresearch.com
Website: http://www.transparencymarketresearch.com/
Visit : http://globalresearchanalysis.blogspot.in/

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Plastic Coatings Market - Global Industry Analysis, Size, Share, Growth, Trends and Forecast 2016 – 2024 here

News-ID: 380212 • Views:

More Releases from TMR – Research Reports

Power Line Communication Market to Present Highly Lucrative Opportunities for Market Players
Power Line Communication Market to Present Highly Lucrative Opportunities for Ma …
Power Line Communication (PLC) is an emerging communication technology which enables data exchange over existing power cables. It uses power grids to communicate between two end-points. PLC technology allow users to control or retrieve data in a half-duplex manner. Furthermore, in this communication method, sender modulates the data, and injects in power cables which can be retrieved by de-modulation at the receiving end. PLC technology is widely used for home
Wood Coatings Market - Roof coatings to Register High Demand | 2025
Wood Coatings Market - Roof coatings to Register High Demand | 2025
The global wood coatings market is choc-o-bloc with players and this has served to intensify the competition over the years. Product differentiation is a key tool leveraged by players to steal a march over their competitors. Key factors promoting growth in the market are the soaring construction activities across the globe and the increasing spending capacity of people which has stoked sales of furniture. Another factor catalyzing growth in the global
Welding Materials Market - Thriving Growth In Industrial Application Segments By 2024
Welding Materials Market - Thriving Growth In Industrial Application Segments By …
The global welding materials market is growing on account of the thriving growth of application segments such as transportation, building and construction, marine, and automobiles. The growing urbanization in developing nations will drive the growth of this market. The increasing infrastructure development in Asia Pacific will also fuel the growth of the welding materials market. The technological advancements in the automobile industry will also aid the growth of this market.
Intumescent Coatings Market Demand for Improved Fire Safety to Fuel Growth By 2024
Intumescent Coatings Market Demand for Improved Fire Safety to Fuel Growth By 20 …
The global intumescent coatings market has remained moderately concentrated as nearly 45% of its overall share was held by three enterprises in 2015. These companies were Sherwin-Williams Co., PPG Industries Inc., and Nobel N.V., finds Transparency Market Research (TMR) in a new study. These companies, besides other prominent market players are continuously making efforts to expand their regional footprint by establishing new manufacturing units. While expanding operations across emerging nations has

All 5 Releases


More Releases for Plastic

Agriculture Film Market SWOT Analysis of Leading Key Players Shandong Tianhe Pla …
HTF MI recently introduced Global Agriculture Film Market study with in-depth overview, describing about the Product / Industry Scope and elaborates market outlook and status to 2023. The market Study is segmented by key regions which is accelerating the marketization. At present, the market is developing its presence and some of the key players from the complete study are British Polythene Industries (BPI), Trioplast, Berry Plastics, Armando Alvarez, Polypak, Barbier
Building Materials Market 218 : Hepworth, National Plastic Industry, Hira Indust …
Building materials in this report covered the PVC pipes and fittings, PPR pipes and fittings, PE pipes and fittings, fabrication, ducts systems for infrastructure, valves and pumps and electrical conduits PVC systems. At present, Hepworth, National Plastic Industry, Hira Industries, Florance Plastic Industries, Polyfab Plastic Industry, MPI, Union Pipes Industry, ANABEEB, Borouge and ACO Group are the UAE leading suppliers of the building materials, and top ten of them shared about
Yazheng Plastic Netting combined type plastic netting machine
Yazheng Plastic Netting developed combined type plastic netting machine.The combined type plastic netting machine can produce plastic deer fencing, anti bird netting, erosion control netting and plastic filtration netting. The combined type plastic netting machine is 30m long, it is be composed of polypropylene grinding miller, extruding machine, high temperature machine, stretch machine, rolled machine and cut machine. The horizontal thread and vertical thread of nettings that produced by
Global Plastic Pails (Plastic Bucket) Market 2018 Key Players: Jokey Group, BERR …
Qyresearchreports include new market research report "Global Plastic Pails (Plastic Bucket) Sales Market Report 2018" to its huge collection of research reports. In this report, the global Plastic Pails (Plastic Bucket) market is valued at USD XX million in 2017 and is expected to reach USD XX million by the end of 2025, growing at a CAGR of XX% between 2017 and 2025. Several regional and global trends account for the attractive
Plastic Closure Market – Analysis of Plastic Closure Test Growth, Plastic Clos …
The latest market intelligence study on Plastic Closure market relies on statistics derived from the application of both primary and secondary research to present insights pertaining to the operational model, opportunities and competitive landscape of Plastic Closure market for the forecast period, 2017 - 2022. Get Access to Sample Pages@ https://www.marketexpertz.com/sample-enquiry-form/142 Importantly, the research taps critical data about the niche segments, market share, size, and growth rate to offer business
Recycled Plastic & Plastic Waste to Oil Market Analysis : TMR
There is a growing need for recycling the plastic and plastic waste. Various major companies are now concentrating on developing new waste-conversion technologies. Some of the major corporates in the global recycled plastic and plastic waste to oil market are Agilyx Inc., Cynar Plc, Vadxx Energy LLC, Nexus Fuels LLC, Clean Blue Technologies Inc., JBI Inc., RES Polyflow, PK Clean, Plastic Advanced Recycling Corporation (PARC), and MK Aromatics Ltd. These