Press release
Types of OCTG casing
Types of OCTG casingOCTG casing is a steel pipe used to support the wall of oil and gas wells to ensure the normal operation of the entire oil well after the drilling process and completion. Each well uses several layers of casing according to different drilling depths and geological conditions. Cement is used to cement the well after the casing is run down. It is different from tubing and drill pipe and cannot be reused. It is a one-time consumable material. Therefore, casing consumption accounts for more than 70% of all oil well pipes.
Casings can be divided into pipes, surface casings, technical casings and oil casings according to their usage.
Different types of casing used in the process of oil extraction:
Surface oil casing: protect the well from being contaminated by shallow water and gas layers, support wellhead equipment and maintain the weight of other layers of the casing.
Technical oil casing: Separate the pressures at different levels so that the drilling fluid can circulate normally and protect the production casing. Install anti-burst devices, leak-proof devices and liners in the well.
Reservoir oil casing: to export oil and natural gas from the reservoir below the surface. It is used to protect wells and stratify drilling mud. When the oil casing is produced, the outer diameter is usually 114.3 mm to 508 mm.
According to SY/T6194-96 "Petroleum Casing", the types and packaging of petroleum casing are divided into short-threaded casing and its coupling and long-threaded casing and its coupling.
Eastern Steel Manufacturing Co.,Ltd: https://www.eastern-steels.com
Address: No.229, Tongzipo West Road, Lugu International Industrial Park, Yuelu District, Changsha, China
Postcode: 410221
Tel: +86 731-85591609
E-mail: sales@eastern-steels.com
Seamless Steel Pipe: https://www.eastern-steels.com/product/seamless-steel-pipe.html
Seamless Carbon Seamless pipe: https://www.eastern-steels.com/products/carbon-steel-seamless-line-pipe.html
Seamless Hydraulic Tube: https://www.eastern-steels.com/products/hydraulic-steel-tube.html
Eastern Steel Manufacturing Co.,Ltd is a leading manufacturer and distributor of seamless steel pipe, welded steel pipe, OCTG products and fittings. We supply first-step processing, semi-finished parts and finished parts to help our clients meet fabrication requirements beyond their capacity or to improve operations by moving forward the pre-production processing. For more, visit: https://www.eastern-steels.com/
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Types of OCTG casing here
News-ID: 3308035 • Views: …
More Releases for Seamless
Carbon steel seamless tube vs Stainless steel seamless tube
The difference between carbon steel seamless tube and stainless steel seamless tube mainly refers to the difference in design rules between carbon steel and stainless steel, which means that the design rules of these two types of steel cannot be used in common. These differences are summarized as follows:
Carbon steel
1. Ordinary steel is carbon steel, that is, iron-carbon alloy. According to the level of carbon content, it is divided into…
Seamless steel tube hardness testing
The hardness test is to slowly press a hard indenter into the surface of the sample under specified conditions, and then test the depth or size of the indentation to determine the hardness of the material. Hardness test is a simple, rapid and easy-to-implement method in material mechanical property test. The hardness test is non-destructive, and there is an approximate conversion relationship between the material hardness value and the tensile…
Anti-corrosion technical requirements for seamless pipes
Seamless steel pipe (SMLS) is the most widely used pipe material at present. Generally, it needs anti-corrosion treatment when it is used for chemical pipelines, oil pipelines, natural gas pipelines, water pipelines and other projects. The common anti-corrosion processes of seamless steel pipes mainly include 3PE anti-corrosion, Epoxy coal tar anticorrosion, epoxy resin anticorrosion, IPN8710 anticorrosion, cement mortar anticorrosion technology, etc.
1. Why is seamless steel pipe anti-corrosion?
Seamless steel pipe is…
seamless and welded pipe
Seamless steel pipe is a round, square and rectangular steel with a hollow section and no joints on the periphery. Seamless steel pipes are made of steel ingots or solid tube billets through perforation into capillary tubes, and then made by hot rolling, cold rolling or cold drawing.
Welded steel pipes refer to steel pipes with seams on the surface that are welded after bending and deforming steel strips or steel…
cs seamless pipe extrusion process
Structural and cs seamless pipe are both extruded. That means a billet of material is forced through a hole in a die shaped to form the two-dimensional cross-section.
Extrusion of seamless tubes
Extrusion method refers to the metal blank into the extruder barrel, extrusion molding and extrusion rod composed of "closed" container by applying pressure to force the metal extruded rod extrusion die orifice outflow from, and access to metal plastic molding…
Seamless Pipes Market 2025: Top Key Players Michigan Seamless Tube, LLC., Tenari …
Market Definition and Introduction
Seamless pipes are a type of pipe with round, hollow cross sections without seams. Generally, they are a wrought steel tubular product manufactured without a welded seam. They are conventionally manufactured using a hot forming process through either extrusion or drawing. This is generally followed by cold sizing and molding the pipe into a desired shape and proportion and giving it desirable properties. Seamless pipes are generally…
