openPR Logo
Press release

Concentration and variety - 15 years of market shares of servo suppliers in the German machinery industry

01-20-2014 07:01 PM CET | Industry, Real Estate & Construction

Press release from: Quest Trend Magazine

Market shares of servo suppliers in the German machinery industry 1999 - 2013

Market shares of servo suppliers in the German machinery industry 1999 - 2013

A new survey made by Quest TechnoMarketing shows how servo suppliers’ market shares in the German machinery industry developed from 1999 to 2013.

The results of this survey are currently published in the Quest Trend Magazine. They are based on three representative market surveys regarding the use of servo drives in the German mechanical engineering industry carried out by Quest TechnoMarketing in the years 1999, 2006 and 2013.

The results document two contradictory tendencies of variety of the suppliers and their concentration in the use.

The variety appears by the fact that the number of main suppliers of servo converters with the machine-builders doubled in the 15 years from 1999 to 2013. So innovations and product differentiation in the servo market open new applications with the machine-builders that can be operated even by smaller suppliers.

The analysis divides the servo suppliers into three groups, i.e. the group of servo suppliers used with 10% and more machine-builders, the group with a market share of over 5% but below 10% and finally the group with a market share of 5% and less.

This structural analysis makes the effect of the concentration in the use of servo suppliers visible. Because in the year 2013 each second machine-builder of servo converters used suppliers with 10% and more market share. Since 2006 more machine-builders have been relying on relatively fewer and larger servo suppliers. The group of these servo suppliers covers 2013 in alphabetical order Lenze, SEW and Siemens.

Each sixth machine-builder used servo suppliers with over 5% and below 10% market share. This group of the servo suppliers showed a stable position with the machine-builders.

A third of the machine-builders preferred servo suppliers with a market share of 5% and less. This group strongly increased their proportion at all denominated servo suppliers from 63% to 84% in the course of 15 years. Here the duplication of the supplier denominations came fully into effect. Even the tendency showed up that a little fewer machine-builders used a larger variety of servo suppliers.

So concentration as well as differentiation is the two trends that were formed by the machine-builders deciding on servo suppliers.

The article is published on http://www.quest-trendmagazin.de/Marktanteile-Servolieferanten.269.0.html?&L=1.

About Quest Trend Magazine:
Quest Trend Magazine publishes trends in automation from the users's point of view mainly in machinery industry, automotive and F&B industry. The economic backdrop of these trends is highlighted as well.

The trends in automation technology are based on market surveys by Quest TechnoMarketing. The economic backdrop is analyzed by Quest Research, a department of Quest TechnoMarketing.

About Quest TechnoMarketing:
Quest TechnoMarketing, Bochum, London, is specialized in market surveys and marketing for the automation technology for more than 20 years and the publisher of the Quest Trend Magazine.

Thomas Quest
Quest Trend Magazine
Hunscheidtstr. 87
44789 Bochum, Germany
Phone +49 234-34777
Fax +49 234-33 22 02
Email: media@quest-trendmagazine.com
Internet: http://www.quest-trendmagazine.com

Quest TechnoMarketing
Thomas Quest
Hunscheidtstr. 87
44789 Bochum, Germany
Phone +49 234-34777
Fax +49 234-33 22 02
Email: media@quest-technomarketing.com
Internet: http://www.quest-technomarketing.com

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Concentration and variety - 15 years of market shares of servo suppliers in the German machinery industry here

News-ID: 280079 • Views: 2334

More Releases from Quest Trend Magazine

China, the USA increase market share in world car production, Japan, Germany los …
The new Quest Trend Report establishes the ranking of the world market shares of the automotive countries and lists their market shares for 2018 and in comparison to 2010. In the ranking of the ten largest automotive countries in the period from 2010 to 2018, only first place, China, and tenth place, France, remained unchanged. The eight other automotive countries changed their position among the ten largest automotive countries. The world's
Global automobile production has been stagnating since the global economic crisi …
The new Quest Trend Report analyzes global auto production since the global economic crisis of 2007 to 2018 and the contribution of China and its market share to global auto production. World car production plunged to its crisis low in 2009. But one year later it had not only left this crisis low behind it, it had even surpassed its pre-crisis level! The jump in world car production was not primarily
Automobile production in Germany: Trend change from growth to decline – new Qu …
The change in trend has been taking place in the German automotive industry since mid-2018, as the updated economic report in the Quest Trend Magazine shows. The monthly updated economic report covers the period from 2008 to 2019 May. The trend in production and sales in the German automotive industry is methodically determined as the average of the last twelve months. The trend in automobile production in Germany surpassed its pre-crisis
Germany's industrial production growing at 2% p.a., stagnation likely for 2019
The new Quest Economic Report examines the trend growth of industrial production in Germany and combines the current situation with a trend forecast. The new Quest Economic Report examines the trend growth of industrial production in Germany. The trend is defined as the moving average of the last 12 months. The report divides the trend in industrial production into two phases since 2008. Only at the end of 2015 the trend

All 5 Releases


More Releases for German

German Maritime Security 2018, German Government Statement!
Despite all international and national efforts, piracy remains a serious peril for the international shipping industry. Especially in Asia (i.e. Chittagong/Bangladesh or on the Strait of Malacca), but also in South America (e.g. Bay of Santos/Brazil or in the port of Callao/Peru) robbery or piracy there has recurred in the recent past. At the West African coast the number of incidents had raised even by 50% with 66 incidents this
More German Investments Mean More German Translations
Why Language Continues to be an Obstacle for Investing in Germany Germany is one of the prime markets for foreign investments, with an estimated 4% of global direct investment making its way into the country. In fact, the world’s second richest man, Warren Buffett, who is only beaten to the top spot on the financial leaderboard by Microsoft Founder Bill Gates, believes Germany to be a ‘great market’, and confirms the
German Design Award 2015
German Design Council Awards a Special Mention to the LR 1000 Laboratory Reactor and Nominates the Tube Mill Staufen, Germany, February 23, 2015 — For the second time, a device produced by IKA® Werke has received the "Special mention for exceptional design quality" award from the German Design Council. The company was presented with the award in the "Excellent Product Design — Industry" category as part of the German Design Award 2015
German Local Trade Tax
All the companies in Germany are liable to pay not only corporate income tax, whose rate is nowadays about 15% of the annual profit of the company, but also trade tax (Gewerbesteuer), which is a tax of German characteristics. Why would we say that trade tax is of German characteristics? Because it is different from the corporate income tax, which is charged by the German Federal Government and it is difficult
Integral Launches German Bureau
Integral Launches German Bureau Appoints Suchit Manchanda as the Head of Operations January 4, 2010: Germany: Integral Fusion, a leading software services firm, has launched operations in Germany and announced the appointment of Suchit Manchanda as their Managing Director. The German bureau will be responsible for strategic business development in European Union organizations and client servicing. Suchit a world class MBA from Hochschule Nürnberg, Germany and a Masters in IT from Jamia
ISPA – German Masters 2008
Magdeburg – Over the long weekend of the 4. Mai more than 1.000 Skat players filled the Mittelland hall in Barleben. The tournaments of the 30. German Mastery and the 27. open International German Single Mastership were held by the International Skat Players Association, ISPA Germany. Patrons of the Games were the 1st Barleber Skat sports club e.V. and the Skat club \"Burger Ihleskater\", whose good organization together with the