openPR Logo
Press release

NET-BOX – Elegant central control unit

The flat design of the new NET-BOX series of wall-mounted enclosures gives you plenty of scope for installing many different electronics assemblies, smaller displays and large-volume connectors. The highlight is located in the lower part: wall mounting is effected on the right and left, and in between there is a large-volume surface for interfaces. When the wiring for the electronics has been completed, the connectors are elegantly covered with a trim – all this without any visible screw connections.
However, the connections always remain accessible.

From stock, the NET-BOX with its curved appearance consists of 3 individual components: a bottom part in the colour lava as well as a top part and a trim, both in light grey (RAL 7035). Thanks to the V0 ASA+PC material used and the IP 65 protection class (sealing kit available as an accessory) for the electronics compartment, the NET-BOX can also be used for terminal units outdoors. The enclosures are available in 3 different sizes – version 140 in 140 x 140 x 46.5 mm (L x W x H), 180 x 180 x 48.5 mm for the 180 version and the NET-BOX 220 in 220 x 220 x 50.5 mm. There is a PCB level in the top as well as in the bottom part, each with the appropriate attachment domes. This is a significant advantage for the individual planning of the electronics installation. Wall mounting is very easy: mount the bottom part on the wall at 3 points. Then bolt the top part and the trim to the bottom part using corrosion-free stainless steel Torx screws. A cover available in the range of accessories makes it possible to create an additional compartment, for example for greater installation volume, to protect the connections or simply to visually close the bottom part of the enclosure.

On account of the clean lines, the elegant colours and the exciting solution, the NET-BOX fits ideally into modern surroundings as a data acquisition system, central control unit, supervision terminal or for data systems engineering, measuring and control engineering as well as medical technology etc.

Odenwälder Kunststoffwerke
Gehäusesysteme GmbH
Friedrich-List Str. 3
74722 Buchen/Germany

Kay Hirmer
E-Mail pr@okw.com
Internet www.okw.com

The core competences of OKW Gehäusesysteme are the development and distribution of solution-oriented plastic enclosures and tuning knobs.

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release NET-BOX – Elegant central control unit here

News-ID: 268126 • Views:

More Releases from OKW Odenwälder Kunststoffwerke Gehäusesysteme GmbH

BODY-CASE – New enclosure size and cradle to match
BODY-CASE – New enclosure size and cradle to match
The wearable enclosure BODY-CASE range by OKW Gehäusesysteme has been extended by a smaller size. In addition, a cradle is also available now to let you put down the enclosure safely or, if necessary, to be able to charge it. Possible applications of the BODY-CASE include mobile data recording and data transmission, measuring and control engineering, digital communications technology, emergency call and notification systems as well as bio-feedback sensors in
SMART-TERMINAL – Aluminium profile enclosure for robust display applications
SMART-TERMINAL – Aluminium profile enclosure for robust display applications
With the new SMART-TERMINAL enclosure range, OKW Gehäusesysteme offers an elegant, flexible and robust aluminium profile enclosure in its standard product programme. A uniform profile cross-section with variable length design as well as matching accessories allow a flexible variety of applications as a table-top or wall-mounted version. The new SMART-TERMINAL range of enclosures consists of a C-shaped top profile made of anodised, glass bead-blasted aluminium. It includes a recessed area for
Extension of the STYLE-CASE enclosure range
Extension of the STYLE-CASE enclosure range
For the STYLE-CASE range of hand-held enclosures, OKW Gehäusesysteme has enlarged its programme with two more sizes, thus rounding off the range with practical products. The special feature of the enclosure family is the elegant, brilliant gloss finish and the ergonomic shape. In addition to the STYLE-CASE in the L version, the sizes S and M are now also available. The enclosures are designed as three-part units, with a top and
Bundled competences for an optimum product solution – OKW, ANSMANN AG and Hoffmann + Krippner
Bundled competences for an optimum product solution – OKW, ANSMANN AG and Hoff …
An electronic device consists of many different components, which all have be efficiently combined with each other to ensure optimum, user-oriented functionality. The joint distribution partnership between OKW Gehäusesysteme, ANSMANN AG and Hoffmann + Krippner offers an individual and efficient product solution. In principle, the basic structure of every electronic device is always the same. First you need the relevant electronics that are to be installed. Then they need protection by

All 5 Releases


More Releases for RAL

Point-Of-Care Or Rapid Diagnostics Market Application, Trend, Type, Growth Oppor …
Point-Of-Care Or Rapid Diagnostics Market is a professional and complete report focusing on primary and secondary drivers, market share, competitor analysis, leading segments, and geographical analysis. This market research report has been structured by thoroughly comprehending the specific requirements of the business. Further, for an unequivocal and better understanding of facts and figures, the data is symbolized in the form of graphs, tables, and charts. This Point-Of-Care Or Rapid Diagnostics
New Hinges from Elesa get the best out of reinforced technopolymers
Elesa have long been market leaders in the use of reinforced technopolymers for robust industrial applications and specialised environments – so they are again delighted to announce new hinge products in this material. The Elesa range of hinges in engineering plastics are designed for protective enclosures, cabinets and frames where strength, lightness, cost and corrosion resistance are key factors in provision of doors or access panels. New CFTX-PP hinges in glass
Metal and visually detectable components from Elesa for food and pharmaceutical …
The designated High-Performing lines of standard components, from the global manufacturing group Elesa, are focused on the exceptional requirements of specific niche industries. In the case of these metal and visually detectable lines, they are designed to be especially easy to detect and remove in the unlikely event that fragments might be accidentally broken off or dislodged and thus fall into a food or pharmaceutical processor. Elesa metal and visually
Feel completely free to select a colour of your choice
Awnings are now available with the fabric in the customer’s favourite colour People love colours. Colours have more influence on our lives than we realise, and a favourite colour can quickly cause our personal well-being barometer to rise. For this reason, we clothe ourselves in certain colour shades or decorate our residences with them. As of now, it is even possible to obtain the awning fabric for a patio in a
Happy Birthday SanTRAL®: 25 years of quality and reliability in public washroom …
Stainless steel complete range meets the requirements for robust and sustainable solutions in public washrooms Continuous development based on close dialogue with customers and users Issum, February 26th. The success story of SanTRAL® began in 1991. The sturdy stainless steel series established itself wherever reliability and robustness are important - in catering establishments and hotels, in public and semipublic buildings, in stadiums, in train stations and airports, in schools or universities. Today SanTRAL®
Enclosure made of special material
In addition to its diverse range of standard plastic enclosures and tuning knobs, OKW Gehäusesysteme also offers production in other special materials. Depending on requirements and intended use, the enclosures can be produced in special colours, in flame-resistant material or in an environment-friendly bio-plastic. Individual colours Enclosures and tuning knobs in your own company colours create a unique impression. Individual components can be accentuated, or the product can be designed in one