Why need a hydraulic oil purifier machine?

What causes the deterioration of oil ?
1.There are two forms of water and gas in oil - DISSOLVED WATER AND GAS(below saturation point) mostly exist in oil systems, while free water and gas (above saturation point) exist in oils.

2.Due to system leakage, lax sealing, oil under long-term heat load, and open storage, finally the moisture and gas in the air settle in the oil, the oil contains with water and gas.

3.Due to the entrance of particles and dust in the air leakage of the system, the falling off of the system abrasion dust, long-term operation of the oil under high temperature and water content will inevitably lead to the decomposition of part of the oil and the separation of gelatinous substances.

The hazard of water, gas, and impurities in oil
The oil is rapidly oxidized and deteriorated to produce acidic substances, which corrode the metal surface
The additives in the oil precipitation will be invalid, then the thickness of the lubricating film is reduced, and mechanical wear is intensified.
Reduced lubrication cooling and flow properties will accelerate the fatigue of metal surface.
The ice crystals formed at low temperature block the components and reduce the rigidity of the system
The system responds slowly and is accompanied by irregular actions with reduced conduction performance.
The higher oil temperature does not provide cooling effect
Oil pumps and power equipment are damaged due to cavitation.

The maintenance of hydraulic oil is very essential, and it is the basic maintenance to ensure the operation system of hydraulic/lubrication equipment.

By Using The ASSEN Hydraulic Oil Purifier Machine You Will Benefit By The Following:
1).Extended Lubricating Oil Life, Reduce friction and save energy
2).Less Equipment Maintenance, Economic benefits from increased production efficiency
3).Reduced Machine Downtime, Prevent losses due to downtime

TECHNICAL FEATURES
1. Strong demulsification ability, the average demulsification time is within 15 minutes.
2. High-precision filtration can effectively remove impurities smaller than 1μm.After several times of filtration, the cleanliness of the oil can be stably maintained at the NAS1638 6 level without block.it is suitable for precision hydraulic systems.
3. Reducing equipment error and losses of shutdown, save the maintenance cost.
Greatly extend the life of oil, reduce 90-99% production of waste oil, and protect the environment at the same time.
4. Perfect auto protection system ensures the plant can continuous work without people, It is a low maintenance cost and best economic benefit machine.
5. Extend the service life of the parts and reduce the replacement cost 44.7%
6. Prevent losses due to downtime 22.3%
7. Economic benefits from increased production efficiency 4.1%

No.31-7 Center Plaza, Shapingba District, Chongqing, China

A professional oil purification system manufacturer
Email:assenoilpurifier@gmail.com
sales@assenpe.com
Whatsapp:+86-15223801122
https://www.assenpe.com

This release was published on openPR.