openPR Logo
Press release

MAUSER Strengthens Plastic Drum Portfolio in Europe

03-18-2013 01:41 PM CET | Industry, Real Estate & Construction

Press release from: MAUSER-Werke GmbH

Bruehl/Germany, March 14, 2013

MAUSER Group, a worldwide leading company in industrial packaging, strengthens its comprehensive plastic drum portfolio in Europe. Following the start of additional plastic drum operations in Poland and Turkey in the year 2012, MAUSER announced a harmonized portfolio on plastic tight head and plastic open head drums to be supplied from its multiple European operations.

To even better serve its customer base in Europe, MAUSER strengthens its product portfolio for plastic tight head and plastic open head drums by focusing on product quality, supply security and cost efficiency. The new European MAUSER plastic drum portfolio builds on a two product line strategy – a fit for purpose standard and high performance range of plastic drums. While not compromising on quality and supply security both product lines differ in UN-homologation level and packaging weight. In total the new MAUSER plastic drum portfolio reflects an increased diversification of packaging requirements by multiple industries that use plastic drums.

As the European market leader in plastic drums, MAUSER today is producing the well-known one piece blow moulded plastic tight head drum – MAUSER L-Ring Drum PLUS® design – out of more than fifteen cavities being installed in six locations across Europe. For the production of plastics open head drums – MAUSER O-Top® Drum design – in the complete volume range from 20 – 220 l the company operates more than 30 cavities in six European countries.

“Not only in terms of installed capacity, but especially towards production flexibility we consider our operational setup for production of plastic drums in Europe unique,” says Frank Schillinger, Head of Operations Europe at MAUSER Group. “As we are not depending on a limited number of high output machinery only, we are prepared to switch volumes to multiple backup units. Supported by a central logistics department and based on a unified quality management system in all our manufacturing locations, we produce our packaging at highest quality and most reliable supply security. With overall seven locations across Europe we always are close to our customers. This not only helps to optimize transport costs but it also reduces the environmental impact coming from the transport of empty packaging to our customers.”

Not compromising on product quality the MAUSER plastic drum portfolio comes with a unified UN-homologation certificate per drum type. Issued by the German competent authority, BAM (Bundesanstalt für Materialforschung und -prüfung), the certificates cover multiple production locations under the same reference number. “As a long time player in industrial packaging designed for the transport of dangerous goods we know about the difficulties and risks involved,” states Michael Schieck, Regulatory Affairs Packaging Europe, MAUSER Group. “We are one hundred percent aware of our responsibility as a manufacturer and that our products have to be in conformity with the latest regulations all the time. Even for long term standard products we continuously update relevant certification and try to improve wherever possible. UN-homologation certificates for our new plastics drum portfolio in Europe therefore not only come with a unified reference number but also cover multiple high quality HMW-HDPE materials. We and our clients do not want to be at any supply risk in case of potential raw material shortage for a specific HDPE grade.”

With its new plastic drum portfolio approach MAUSER addresses its customers’ unchanged interest in highest possible standardization while at the same time reflecting varying performance requirements by different applications. “To reduce complexity in their packaging portfolio our customers ask to have standardized high quality packaging across the region,” remarks Marc Loeffler, Head of Technical Service Europe at MAUSER. “But at the same time they more and more see the need to carefully reflecting what packaging requirement is needed for which specific application. It is not only the commercial aspects that make them look into fit for purpose packaging but also the growing awareness, that the UN-marking on a drum only tells part of the story when it comes to packaging performance and quality. Facing no problems in daily transport to our customers is much more important than seeing their goods being packed into packaging with the potentially highest UN-rating marked on it. Based on our extensive experience we estimate that 95% of all market applications for our plastic tight head drums are to be covered by our standard tight head drum at Y1.9/200 UN-rating. Quite similar situation applies to our open head drum range. We see our standard being rated for transportation of solids up to packaging group I, maximum density at 1.3 g/cm3, covering 85% of all market needs.”

Besides the comprehensive portfolio of standard and high performance drums MAUSER continues to supply its clients with multiple special and customized plastic packaging. “The implementation of the new portfolio for our European plastic drums comes with the clear intention to further optimize our product and service portfolio,” summarizes Juergen Scherer, General Manager SBU Europe, MAUSER Group. “During the last years we did a lot to enlarge and optimize our European footprint for the production of plastic drums. As the market leader we do not compromise on supply security, product quality and technical support coming with our plastic drums while at the same time we have to face a highly competitive market surrounding. Our new portfolio structure will help to even better address the European customers’ needs and sets the basis for more initiatives in this important product segment of ours to come. It highlights the strength of our company and is in line with our intention to be the most sustainable choice when it comes to industrial packaging.”

For more information on the European MAUSER plastic drum portfolio please refer to www.mausergroup.com or contact our European sales team under info@mausergroup.com.

About MAUSER Group
MAUSER Group is a worldwide leading producer of industrial packaging with approx. 4,000 employees and consolidated revenue of some EUR 1 billion. Founded in 1896 and headquartered in Bruehl near Cologne (Germany), the company has influenced the international market through innovative packaging technologies. The portfolio for customers in the chemical, agrochemical, petrochemical, and pharmaceutical sectors as well as in the food and beverage industries includes plastic packaging, fiber drums, steel drums, Intermediate Bulk Containers (IBC), and reconditioning services through the National Container Group (NCG), a MAUSER subsidiary. MAUSER therewith provides sustainability-oriented full cycle services – from production to recycling (“ECO-CYCLE®”). With 60 MAUSER/NCG sites and multiple Joint Ventures in Europe, the Americas and Asia plus two licensee networks for plastic and steel packaging, the company is a presence around the globe. www.mausergroup.com

PSM&W Kommunikation GmbH
Birgit Woelker / Annette Spiegel
PR Agency
Leipziger Str. 59
60487 Frankfurt am Main, Germany
Tel.: +49 (0)69-970705-71 /-35
Fax: +49 (0)69-970705-55
mauser@psmw.de
www.psmw.de

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release MAUSER Strengthens Plastic Drum Portfolio in Europe here

News-ID: 255180 • Views: 17726

More Releases from MAUSER-Werke GmbH

MAUSER Poland Celebrates 5th Anniversary
Bruehl/Germany, June 27, 2017 MAUSER Group, a worldwide leading company in industrial packaging, celebrates the 5th anniversary of its factory in Gliwice, Poland. Ideally located in the industrial heartland of Upper Silesia, and operated by a strong local management team, the plant offers high-quality industrial packaging solutions and services. MAUSER Poland serves customers with a comprehensive product range of Composite Intermediate Bulk Containers (CIBCs) and plastic tight-head drums. In line with
MAUSER launches innovative barrier concept for IBCs and rigid plastics packaging …
Bruehl/Germany, April 11, 2017 MAUSER Group, a worldwide leading company in industrial packaging, presented its new skINliner™ barrier technology during a recent customer event in Heidelberg, Germany. The MAUSER skINliner™ barrier technology combines the advanced barrier performance of multilayer plastic film technology, e.g. against hydrocarbons and/or oxygen, with the logistical and lifecycle benefits of rigid packaging. The new modular packaging design provides best-in-class reuse and recyclability. “To date, the integration of flexible
MAUSER Group and NCG at FachPack 2015: The Success Story Continues
Brühl/Germany, October 15, 2015 The innovative and sustainable packaging concepts of MAUSER Group and its subsidiary National Container Group (NCG) generated great interest at this year's FachPack exhibition in Nuremberg, Germany. Customers and prospective customers were able to experience first-hand, how the life cycle of industrial packaging is closed. From September 29th until October 1st, FachPack, one of the leading European trade fairs for products and services in the fields of packaging,
MAUSER and IBA partner on new IBC packaging concept for the food industry
Bruehl/Germany, March 24, 2014 - MAUSER Group, a worldwide leading company in industrial packaging, introduces an innovative IBC packaging concept for the food industry. The new MAUSER FP15 Aseptic combines the strength and robustness of the MAUSER SM IBC series with an innovative aseptic flex bag developed by Intermediate Bulk Alliance (IBA), a German based specialist in food supply chain solutions. With its latest product innovation MAUSER provides a one

All 5 Releases


More Releases for MAUSER

TIME MAUSER expands footprint in India
Mumbai/India, August 23, 2017 TIME MAUSER INDUSTRIES PVT. LTD., a joint venture of Time Technoplast and MAUSER Group, announced today that it has opened its second production site for tight head international standard steel drums and open head steel drums at its new state-of-the-art production facility in Jambusar, India. "The new site in Jambusar is a logical extension of our footprint in India and another milestone in our cooperation with Time Technoplast.
MAUSER Poland Celebrates 5th Anniversary
Bruehl/Germany, June 27, 2017 MAUSER Group, a worldwide leading company in industrial packaging, celebrates the 5th anniversary of its factory in Gliwice, Poland. Ideally located in the industrial heartland of Upper Silesia, and operated by a strong local management team, the plant offers high-quality industrial packaging solutions and services. MAUSER Poland serves customers with a comprehensive product range of Composite Intermediate Bulk Containers (CIBCs) and plastic tight-head drums. In line with
MAUSER Announces Acquisition of Berenfield Containers
Bruehl/Germany, April 1, 2016 On March 31, 2016, MAUSER Group, a worldwide leading company in industrial packaging based in Bruehl, Germany, announced the acquisition of Berenfield Containers by its US subsidiary, MAUSER USA, LLC. Established in 1914, Berenfield Containers operates six manufacturing facilities in five cities in the United States, producing a variety of steel and fiber drums. The Berenfield operations will be combined with the MAUSER network of twenty North
MAUSER Acquires Greif Brazil Plastic Drum and IBC Business
Bruehl/Germany, May 6, 2015 MAUSER Group, a worldwide leading company in industrial packaging based in Bruehl, Germany, acquired the plastic drum and IBC business of Greif in Sao Paulo, Brazil. The acquisition was effective May 1, 2015 with the newly added business providing MAUSER a broader customer base to supply its industry leading line of plastic packaging as well as its line of IBCs. The investment made by MAUSER to
MAUSER Announces Acquisition of IBC NA and Clean Tide Container
MAUSER Group, a worldwide leading company in industrial packaging based in Bruehl, Germany, announces the acquisition of family owned and operated IBC North America (IBC NA) and Clean Tide Container. IBC NA operates three manufacturing and five reconditioning facilities across the United States. This acquisition provides MAUSER and NCG (MAUSER’s reconditioning subsidiary) the ability to better serve their combined markets in North America, specifically the agricultural-chemicals (AgChem) industry. In addition
MAUSER increases shareholding in IBC Joint Venture Fanshun MAUSER Shanghai Packa …
Bruehl/Germany, March 28, 2014 MAUSER Group, a worldwide leading company in industrial packaging, is increasing its shareholding in its Shanghai based IBC joint venture Fanshun MAUSER Shanghai Packaging Co., Ltd. Mauser Holding International GmbH and Shanghai Fanshun Company, Ltd., a leading rigid packaging producer in China, agreed to increase the MAUSER stake in their mutual joint venture for IBCs, Fanshun MAUSER Shanghai Packaging Co., Ltd., from 32.5% to 50%. The agreement