openPR Logo
Press release

Valve Lifter Market Poised to Garner Maximum Revenues during 2021-2027

11-16-2021 11:03 AM CET | IT, New Media & Software

Press release from: Transparency Market Research

Valve Lifter Market

Valve Lifter Market

Automotive Valve Lifter: Introduction

A valve lifter, also known as tappet, or cam follower, is a key component in an internal combustion engine. A valve lifter is located between valve lifting mechanism and camshaft lobe.

A valve lifter eliminates the need for mechanical clearance in the engine’s valve train. It also protects the engine valve from thermal expansion normally witnessed in an engine, which is caused due to high temperature generated in the combustion chamber.

Key Drivers of Global Automotive Valve Lifter Market

Demand for high performance engines and high power in automobiles is driving the market for automotive valve lifter. For instance, high performance vehicles, such as racing cars, that require the engine to deliver high power and performance, require a valve lifter with accurate timing, which ensures timely opening and closing of an engine valve. When a vale lifter is not functioning properly, the engine produces a knocking sound while starting. This indicates that either the engine oil needs to be replaced or valve lifter needs to be cleaned.

Government regulations and standards have mandated an increase in fuel efficiency of vehicles, which in turn is driving the global automotive valve lifter market. For instance, Corporate Average Fuel Economy (CAFE) regulations across the globe are prompting automakers to enhance fuel efficiency of their vehicles in the time frame proposed by government and regulatory authorities. The National Highway Traffic Safety Administration (NHTSA) and the U.S. Environmental Protection Agency (EPA) have set standards to improve fuel economy and reduce emission gases for passenger cars and light trucks for all new models from 2017. India has also adopted CAFÉ regulations since April 1, 2017 in order to reduce average corporate CO2 emission caused by two-wheelers, three-wheelers, passenger and commercial vehicles. Similar norms are being adopted in several countries including China to reduce fuel consumption in vehicles.
Roller tappets or roller valve lifters are gaining popularity among vehicle manufacturers owing to enhanced output performance and vehicle efficiency. Roller tappets can operate at high engine rpms ranging from 1500 to 2000. The only drawback being that roller tappets are expensive.

Are you a start-up willing to make it big in the business? Grab an exclusive PDF Brochure of this report https://www.transparencymarketresearch.com/sample/sample.php?flag=B&rep_id=74497

Rise in trends toward electrical vehicles to hamper global automotive valve lifter market
Popularity of electrical vehicles is rising, as they are emission-free and are expected to reduce carbon footprint owing to increasing adoption. Norway, Germany, and China are key consumers of electrical vehicles. Electric propulsion also eliminates the IC-engine in vehicles and hence, a rise in preference toward electrical vehicles is expected to hamper the global automotive valve lifter market.

Passenger vehicle segment to account for significant share of automotive valve lifter market
Increase in popularity of SUVs and hatchbacks in the Americas is driving the demand for SUVs and hatchbacks. Demand for premium sports cars is rising due to increasing standards of living and economic development in Europe and Americas. For instance, Ford Mustang, Chevrolet Camaro, and Audi A5 are a few of the models gaining popularity among consumers in Canada and the U.S.
Economic development in countries such as India, China, Vietnam, and South Korea has led to improved roads and infrastructure. This, in turn, has fueled the trends of owning a vehicle, resulting in an increase in number of passenger vehicles. Therefore, a rise in the number of passenger vehicles is propelling the automotive valve lifter market.

Asia Pacific to hold prominent share of global automotive valve lifter market

Countries in Asia Pacific are enacting stringent regulations in order to reduce air pollution and curb climate change. For instance, government regulations such as CAFÉ and pollution control norms in countries such as China, India, and Japan are driving the need for fuel efficient, high-performance vehicles in the region. This, in turn, is fueling the demand for valve lifter that increases the efficiency, power output, and performance of vehicle engine.

Key players operating in global automotive valve lifter market

The global automotive valve lifter market is highly concentrated owing to the presence of top manufacturers. A few of the key players operating in the global automotive valve lifter market are:

Schaeffler
Rane Holdings Limited
Crower Cams & Equipment Co., Inc.
Shri Ram International
Wuxi Xizhou Machinery Co., Ltd.
SM Motorenteile GmbH
LUNATI (lunatipower.com.)
COMP Cams
SSV Technocrates

Looking for Regional Analysis or Competitive Landscape in Automotive Valve Lifter market, ask for a customized report https://www.transparencymarketresearch.com/sample/sample.php?flag=CR&rep_id=74497

Global Automotive Valve Lifter Market: Research Scope
Global Automotive Valve Lifter Market, by Vehicle Type
Passenger
Commercial
Global Automotive Valve Lifter Market, by Type
Hydraulic Valve Lifter
Mechanical Valve Lifter
Roller Valve Lifter
Global Automotive Valve Lifter Market, by Sales Channel
OEMs
Aftermarket
Global Automotive Valve Lifter Market, by Region
North America
U.S.
Canada
Europe
Germany
France
U.K.
Italy
Spain
Russia & CIS
Rest of Europe
Asia Pacific
China
Japan
India
ASEAN
Rest of Asia Pacific
Latin America
Brazil
Mexico
Rest of Latin America
Middle East & Africa
GCC
South Africa
Rest of Middle East & Africa

The report offers a comprehensive evaluation of the market. It does so via in-depth qualitative insights, historical data, and verifiable projections about market size. The projections featured in the report have been derived using proven research methodologies and assumptions. By doing so, the research report serves as a repository of analysis and information for every facet of the market, including but not limited to: Regional markets, technology, types, and applications.

Contact

Transparency Market Research

State Tower,

90 State Street,

Suite 700,

Albany NY – 12207

United States

USA – Canada Toll Free: 866-552-3453

Email: sales@transparencymarketresearch.com

Website: https://www.transparencymarketresearch.com

About Transparency Market Research

Transparency Market Research is a global market intelligence company, providing global business information reports and services. Our exclusive blend of quantitative forecasting and trends analysis provides forward-looking insight for thousands of decision makers. Our experienced team of analysts, researchers, and consultants use proprietary data sources and various tools and techniques to gather and analyse information.

Our data repository is continuously updated and revised by a team of research experts, so that it always reflects the latest trends and information. With a broad research and analysis capability, Transparency Market Research employs rigorous primary and secondary research techniques in developing distinctive data sets and research material for business reports.

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Valve Lifter Market Poised to Garner Maximum Revenues during 2021-2027 here

News-ID: 2463835 • Views:

More Releases from Transparency Market Research

Global MEMS Speaker Market Poised for Explosive Growth, Set to Reach USD 13.4 Bn by 2035 Amid Wearables Boom
Global MEMS Speaker Market Poised for Explosive Growth, Set to Reach USD 13.4 Bn …
The global MEMS speaker market is entering a high-growth phase, fueled by rapid innovation in consumer electronics, miniaturization of components, and rising adoption of smart wearables and hearables. Valued at US$ 2.7 Bn in 2024, the market is projected to reach US$ 13.4 Bn by 2035, expanding at a robust CAGR of 14.7% from 2025 to 2035. The shift toward solid-state, silicon-based audio solutions and the growing integration of MEMS
Shunt Capacitor Market to Reach US$ 8.2 Billion by 2035, Expanding at 7.4% CAGR Driven by Smart Grid and Renewable Energy Integration
Shunt Capacitor Market to Reach US$ 8.2 Billion by 2035, Expanding at 7.4% CAGR …
The global shunt capacitor market is entering a decisive growth phase as power utilities, industries, and governments accelerate grid modernization and energy efficiency initiatives. Shunt capacitors, long regarded as a foundational technology for power factor correction and voltage stabilization, are now becoming strategic assets in smart grids, renewable energy integration, and large-scale power transmission networks. Between 2025 and 2035, the market is expected to undergo structural transformation driven by digitalization,
Medical Biomimetics Market to Reach USD 19.3 Billion by 2034, Driven by Regenerative Medicine Boom
Medical Biomimetics Market to Reach USD 19.3 Billion by 2034, Driven by Regenera …
The Medical Biomimetics Market represents one of the most innovative intersections of biology and medical technology. Biomimetics refers to the practice of designing medical devices, materials, and therapeutic solutions by mimicking natural biological structures, processes, and functions. In healthcare, this approach is transforming how diseases are treated, tissues are repaired, and medical devices interact with the human body. The global Medical Biomimetics Market was valued at approximately USD 9.4 billion in
Connected Rail System Market Expanding at 8.1% CAGR Through 2035 - By Solution Type / By Application | China • India • Japan • Germany
Connected Rail System Market Expanding at 8.1% CAGR Through 2035 - By Solution T …
The global connected rail system market was valued at US$ 14.8 billion in 2024 and is projected to reach US$ 34.9 billion by 2035, expanding at a robust compound annual growth rate (CAGR) of 8.1% from 2025 to 2035. This sustained growth trajectory reflects the increasing importance of digital connectivity, automation, and real-time data exchange in modern rail transportation systems worldwide. Discover valuable insights and findings from our Report in this

All 5 Releases


More Releases for Valve

Australian Pressure Safety Valve Market by Offering (Safety Valve and Safety Val …
The availability of abundant natural resources, such as petroleum and shale gas, in Australia is expected to provide profitable opportunities for the Australia pressure safety valve market. Moreover, the government‐™s initiative to encourage offshore exploration of minerals deposits could further boost the business opportunities for market players in Australia. The presence of a wide oil & gas distribution network continues to provide a steady stream of revenue to market players;
Control Valve Market by Region - North America, Latin America, Europe, Japan, AP …
Increasing penetration of automation across several industrial verticals has fuelled the demand for components that regulate pressure, temperature and other elements effectively. Manufacturers are advancing their capabilities in developing control valves for the future industrial demands. New designs are being incorporated to increase the efficiency of control valves in enabling a direct control of the flow rate, and in processing the information on liquid level, temperature and pressure. According to Fact.MR’s
Australian Pressure Safety Valve Market by Offering (Safety Valve and Safety Val …
Australian pressure safety valve market size is expected to reach $65.38 million by 2025 from $52.12 million in 2017, growing at a CAGR of 2.88% during the forecast period (2018–2025). Pressure safety valves (pressure relief valves) are specially designed valves that regulate the surge in pressure within the pressure systems, which otherwise could hinder industrial processes. The valves have outlets that guide the additional flow of fluids or gases, which
Control Valve Market Analysis Report by Region - North America, Latin America, E …
Fact.MRs’ latest forecast study assesses that the global control valve market will expand steadily during the forecast period, 2017-2026. Increasing industrialization and growing use of pneumatics in mechanical processes will drive the adoption of control valves to a considerable extent. The global control valve market will register expansion at a 5.4% CAGR in terms of volume over, the forecast period. By the end of 2026, control valves worth over US$ 15.5 Bn
Bleed Valve Market 2017-Eaton, Weir Group, KSB, Mahle, Mogas, Alfa Laval, Nihon …
Apex Research, recently published a detailed market research study focused on the "Bleed Valve Market" across the global, regional and country level. The report provides 360° analysis of "Bleed Valve Market" from view of manufacturers, regions, product types and end industries. The research report analyses and provides the historical data along with current performance of the global Bleed Valve industry, and estimates the future trend of Bleed Valve market
Global Plug Valves Market: Yuandong Valve, Yuanda Valve, Weir, Walworth, Zhengqu …
Global Market Study Evaluate on Plug Valves Industry by Type, Manufacturers, Application, Type, and Regions, Forecast up to 2022 The scope of the global Plug Valves market report is: This report offers a comprehensive evaluation of the Plug Valves market. It does so by in-depth qualitative insights, historical Plug Valves market data, and verifiable projections about global Plug Valves market size. The projections featured in the Plug Valves market report have been