Durable two-component polymer plain bearing to pan high loads up to 13.7 tons

Durable two-component polymer plain bearing to pan high loads up to 13.7 tons

The polymer specialist from igus GmbH, Cologne, presented last year with the material “iglidur Q2” a high load plain bearing which is more durable by a factor of 2 to 5 in harsh environmental conditions than the other 40 plain bearing materials of the company. Based on this material, the limits of performance of injection-moulded plastic bearings could be once again altered with a clever multi-component system: in comparison with iglidur Q2, the new iglidur Q2E (=enclosed) reaches in igus internal pan tests a higher lifetime by a factor of 3 at a radial load at 180 MPa. For this reason a two-component bearing of 30 mm length and 25 mm diameter can take loads of about 13.7 tons. This is equivalent to the weight of two full-grown bull elephants.

It all comes down to the mixture
The bearing consists of a hard polymer shell and a tribo-optimized core made of iglidur Q2 that is also stable in shape and wear-resistant even under high loads. Similar to an exoskeleton, the shell provides the bearing with high stability and makes for an increased lifetime. In addition to that there is the corrosion and maintenance freedom that can increase the productivity in many applications, especially compared to metallic solutions, because downtimes for service or repair can be renounced. iglidur Q2E is initially available for shaft diameters of 20, 25, 30 and 40 mm.

Even more selection for standards
The plain bearing program of the standard high-load material iglidur Q2 has been increased. Available are now iglidur Q2 bearings for shaft diameters up to 75 mm with and without collar. Especially in the field of agricultural engineering, commercial vehicles, construction machines as well as jig manufacturing and mechanical engineering, iglidur Q2 and Q2E plain bearings prove robustness.

Based in Northampton in the UK, and with global headquarters in Cologne, Germany, igus is the largest producer of injection moulded polymer bearings and reinforced plastic cable carriers in the world. Product lines include industry-leading e-chain cable carriers, chainflex continuous-flex cables, iglidur plastic plain bearings, igubal spherical bearings, drylin linear bearings and guide systems. The company has 26 subsidiaries across 31 countries and employs approximately 1,800 people worldwide.

With plastic bearing experience since 1964, cable carrier experience since 1971 and continuous-flex cable since 1989, igus provides the right solution based on 80,000 products available from stock with between 1,500 and 2,500 new products introduction each year.

For more information visit
http://www.igus.co.uk/default.asp?c=gb&L=en&WT.mc_id=PRLUK02

igus UK Ltd

51A Caswell road, Brackmills, Northampton, NN4 7PW
United Kingdom

This release was published on openPR.