High Frequency Welded (HFW) Pipe
High-frequency welding is a kind of induction welding (or pressure contact welding). It does not require welding seam fillers, no welding spatter, narrow welding heat affected zone, beautiful welding shape and good welding mechanical properties. It is widely used in steel pipe production.
In welding, equipment is used to convert low power into high frequency power to complete the melting and welding process of solid metal. In high-frequency welding, resistance and heating of pressure rolls and tube blanks. Therefore, in order to ensure welding efficiency, it is necessary to control the interaction of the coil, impedance and rolling mill to optimize the welding process and ensure that the power consumption during the welding process is within a reasonable range. This is the problem that must be paid attention to in high-frequency welding technology.
Analysis of the principle of high frequency welding：
The so-called high frequency in high frequency welding refers to the current with a frequency of 50KHz-400KHz. This current will have two effects on the metal. One is the skin effect: unevenness occurs when high-frequency current passes through the conductor. And the density of the conductor surface is large and the inside is small, which is the skin effect; one is the proximity effect, high-frequency current flows in the opposite direction between adjacent conductors, even if the other side is short, the current will be concentrated to the edge. Will flow to the shorter side, producing a proximity effect. These two effects are the basis of high frequency welding. High-frequency welding uses the skin effect to concentrate the high-frequency current on the working surface, and uses the proximity effect to control the loop position and range of the high-frequency current, so that the adjacent steel plates are heated and melted to complete the welding.
High-frequency welding technology uses the change of current frequency to produce skin effect and proximity effect on metal, thereby causing the metal to melt and complete the welding. Therefore, controlling its current is the most important technical parameter. The above analysis is high frequency welded pipe. The main technical parameters that need to be controlled in this process and their technical characteristics indicate that to reduce energy consumption, impedance, frequency and induction coils must be fully adjusted. Used to ensure welding quality.
There are four types of high-frequency welded pipes:
1. Welded steel pipes used for low pressure fluid delivery are also called ordinary welded pipes, usually called clarinets.
2. Galvanized welded steel pipe used for low pressure fluid transportation is also called galvanized welded steel pipe, commonly known as white pipe
3. Ordinary carbon steel wire casing is a steel pipe used to protect wires in electrical installation projects such as industry, civil construction, and mechanical equipment installation.
4. Straight seam electric welded steel pipe refers to a steel pipe whose weld seam is parallel to the longitudinal direction of the steel pipe.
Steel pipes are usually divided into two categories, one is welded steel pipe and the other is seamless steel pipe. Welded steel pipes are also called welded pipes. They are steel pipes made of steel or strip steel after crimping. Welded pipe is divided into: straight seam welded pipe and spiral welded pipe. of course! The surface quality and dimensional tolerances of welded pipes produced by different materials and processes are different.
What is the difference between ERW and HFW steel pipes?
ERW steel pipe includes HFW steel pipe:
ERW is the general term for electric resistance welded steel pipe. It can be divided into two types: alternating current welding (AC) and direct current welding (DC). According to the different frequency, AC welding can be divided into low frequency welding, intermediate frequency welding, ultra high frequency welding and high frequency welding. High frequency welding (HFW) is mainly used for ordinary or thin-walled steel pipes. It includes contact welding and induction welding. DC welding is usually used for small diameter steel pipes. Generally, HFW is one of ERW production methods, which uses high-frequency welding technology. Therefore, ERW steel pipe includes HFW steel pipe.
Permanent Steel Manufacturing Co.,Ltd: https://www.permanentsteel.com
Address: #668,Lugu Avenue,Hi-Tech Industrial Development Zone,Changsha,China
ERW steel pipe: https://www.permanentsteel.com/productshow/erw-steel-pipe.html
ASTM A53 ERW pipe: https://www.permanentsteel.com/newsshow/astm-a53-erw-pipe.html
ERW Casing: https://www.permanentsteel.com/newsshow/erw-casing.html
Permanent Steel Manufacturing Co.,Ltd have years of experience in manufacturing of carbon steel pipe, stainless steel tube, hollow section, pipe fittings.(Fluid Pipe/Boiler Tube/Fire Pipe/Line Pipe/Structure Tube)
As a factory,which specializing in the production, processing and sales of various steel pipes and pipe fittings size enterprises, headquartered in Hunan, the production base is located in Shandong and Tianjin. So far, the facility occupies more than 228,000 square feet under roof and includes two working mills and quality assurance chemical- and strength-testing laboratories on site and located on a 2,000-acre site with more than 60 acres under roof, is home to one of the world’s largest cupolas; and the Contiarc, the first-of-its-kind continuous arc furnace.
This release was published on openPR.
Permanent link to this press release:
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release High Frequency Welded (HFW) Pipe here
News-ID: 2284735 • Views: 807
More Releases from Permanent Steel Manufacturing Co.,Ltd
Ten Ways to Remove Burrs from Steel Pipes
Burrs are ubiquitous in the metalworking process. No matter how advanced and sophisticated equipment you use, it will be born with the product. It is mainly due to the plastic deformation of the material and an excess iron filings generated on the edge of the processed material, especially for materials with good ductility or toughness, which are particularly prone to burrs. The types of burrs mainly include flash burrs, sharp corner
Tension Adjustment of Sizing Section of High Frequency Straight Seam Welded Pipe
In order to ensure that "tube pulling" and "tube stacking" do not occur in the forming section, welding section and sizing section, according to the rolling principle of high-frequency straight seam welded pipe (ERW), it is necessary to ensure that the welded tube blank maintains proper tension in each section. In addition to the pass speed and rolling force, the factors that affect the tension are the sizing allowance, the outer
The Advantages and Selection Criteria of Seamless Steel Pipes
The advantages of seamless steel pipes are high pressure resistance, good toughness, long pipe sections and few joints. The disadvantage is that it is expensive, easy to corrode, and thus has a short service life. (1) Ordinary seamless steel pipe Ordinary seamless steel pipes are rolled from ordinary carbon steel, high-quality carbon steel, low-alloy steel or alloy structural steel. Variety of specifications, high strength, It is the most commonly used pipe material for
Performance Comparison of ERW and Spiral Steel Pipe
Performance comparison of carbon ERW steel pipe and spiral steel pipe: 1. Overview The welding of ERW steel pipe is the skin effect and proximity effect of high-frequency current. The process of using high-frequency current and induced high-frequency current (rising at the end of the 20th century) resistance to heat and melt the edge of the tube blank, and apply squeezing force to weld together process. The welding of SSAW steel pipe is
More Releases for HFW
Thermal Spray Products - Comprehensive Analysis on Global Market Report by Compa …
Thermal Spray Products - Comprehensive Analysis on Global Market Report by Company, by Dynamics, by Region, by Type, by Application and by COVID-19 Impacts (2014-2026) According to the latest market research report “Thermal Spray Products - Comprehensive Analysis on Global Market Report by Company, by Dynamics, by Region, by Type, by Application and by COVID-19 Impacts (2014-2026)” released by Global Market Monitor, the global Thermal Spray Products market was capitalized at
Wireless Fire Detection Market 2019 Key Competitors Analysis - Siemens, Schneide …
Wireless Fire Detection report offers one of the best solutions to know the trends and opportunities in Semiconductors and Electronics industry. This report offers broader perspective of the market place with its comprehensive market insights and analysis. The Wireless Fire Detection Market research report contains lot of features to offer for Semiconductors and Electronics industry which includes general market conditions, trends, inclinations, key players, opportunities, and geographical analysis. What is
North America High-Performance Ceramic Coatings Market 2018-2023 Status & Outloo …
Browse Market Data Tables and Figures spread through 172 Pages and in-depth TOC on “Global North America High-Performance Ceramic Coatings Market 2018 by Type, by End-users, by Applications, by Region – Global Forecast to 2023” The North American Market For High-Performance Ceramic Coatings was valued at REDACTED in 2017. This figure is expected to increase to REDACTED in 2018 and rise further to almost REDACTED in 2023, with a projected five-year
Latest Report On Thermal Spray Products Market 2018 Global Analysis By Key Playe …
Thermal Spray Products Industry research report delivers a close watch on leading competitors with strategic analysis, micro and macro market trend and scenarios, pricing analysis and a holistic overview of the market situations in the forecast period. Get FREE Sample Report Before Buying @ https://www.upmarketresearch.com/home/requested_sample/5670 UpMarketResearch offers a latest published report on “Global Thermal Spray Products Market Analysis and Forecast 2018-2023” delivering key insights and providing a competitive advantage to clients
Thermal Spray Products Market Is Expected to Exhibit an Upward Growth Trend Acro …
Qyresearchreports include new market research report Thermal Spray Products to its huge collection of research reports. The global Thermal Spray Products market is forever evolving, and hence a number of factors will define the future prospects. The research analysts of this report recognizes this, and hence have created a business tool that can serve its true purpose for the stakeholders attached to the value chain of the global Thermal Spray Products
Global And China Ceramic Thermal Spray Coatings Industry 2017 Market Research Re …
If you want to ask a sample report or make an order, please contact us: Email: email@example.com Web: http://qyresearchglobal.com/ In this report, the global Ceramic Thermal Spray Coatings market is valued at USD XX million in 2016 and is expected to reach USD XX million by the end of 2022, growing at a CAGR of XX% between 2016 and 2022. The Global And China Ceramic Thermal Spray Coatings