openPR Logo
Press release

PMI Foam Market: Growth Analysis & Forecast till 2026

04-15-2021 01:57 PM CET | Advertising, Media Consulting, Marketing Research

Press release from: Stratview Research

PMI Foam Market Forecast:
The PMI Foam Market is forecasted to grow at a rate of 10.4% CAGR during the period of 2021-2026. The PMI Foam Market growth depends upon numerous factors which have direct or indirect impact on the demand. Our report has the summary of such factors derived using SWOT, PEST, industry life cycle and supply chain analysis. These methods help in analysing the strength of the companies and identify gaps as well as opportunities to lay out a successful roadmap which leads to higher profitability.

Some linchpins in the market are:
• 3A Composites
• BASF SE
• Zhengzou Meiwo Science & Technology Development Co., Ltd
• Cashem Advanced Materials Hi-Tech Co., Ltd.
• DIAB Group (Ratos)
• Evonik Industries AG
• Jiaxing Sky Composites Co., Ltd.
• SABIC
• Solvay S.A.
• Zotefoams PLC.

Wish to receive a sample? Request here:
https://www.stratviewresearch.com/Request-Sample/1325/PMI-foam-market.html#form

PMI Foam Market Segmentation:
The report segments based upon demographics, geographics, benefits and volume etc, has different driving factors and identifies the most-attractive segments and sub-segments. PMI Foam Market segmentation will not only help marketers to be more efficient in terms of time, money and other resources but also allows companies to learn about their target audience so that they can tailor campaigns and increase market share and revenue.

COVID-19 IMPACT Analysis on PMI Foam Market
Coronavirus has influenced every one of the organizations, little or large, dealing in any sector. The growth curves of PMI Foam Market have seen immense fluctuations in the year 2020. The market scenario and the pace of growth have taken a colossal turn and have prompted numerous adjustments in the cycles, which will have repercussions for a significant stretch. 2021 is probably going to be superior to 2020 for the PMI Foam Market players as the greater part of the organizations have continued their activities and the interest is getting reestablished for them.

Note: This report will be refreshed to consolidate the effect of COVID-19, available for the time of 2021 to 2026.

Regional Analysis:
Europe is estimated to be the largest consumer and Asia-Pacific is estimated to witness the highest growth rate in the PMI foam market during the forecast period. The increasing demand for PMI foams in Asia-Pacific is due to the growth of wind energy, sporting goods, and the aerospace & defense industries. North America is also expected to offer substantial growth opportunities during the forecast period.

Stratview Research
400 Renaissance Center,
Suite 2600,
Detroit, Michigan, MI 48243
United States of America
Phone No. +1-313-307-4176
Email: sales@stratviewresearch.com

About Stratview Research
Stratview Research is a global market intelligence firm helping its clients’ tract the ever-evolving market scenarios through customised and syndicated reports. The reports offered here are gathered with the help of our wide-ranging and reliable secondary sources and in-depth interviews with the linchpins within the market. Extrapolated through primary and secondary research, Stratview Research’s reports help you remain ahead of the curve by enabling you to understand the current market trends and challenges coming on your way. Our strong team of industry veterans and researchers assure high quality research and strategic insights that help companies worldwide in effective decision making.

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release PMI Foam Market: Growth Analysis & Forecast till 2026 here

News-ID: 2270860 • Views:

More Releases from Stratview Research

Semiconductor Vacuum Valve Market Set to Reach US$ 1.0 Billion by 2031, Reports Stratview Research
Semiconductor Vacuum Valve Market Set to Reach US$ 1.0 Billion by 2031, Reports …
Stratview Research, a leading global market research firm, forecasts that the global Semiconductor Vacuum Valve market will grow at an annual rate of 6.7%, reaching US$ 1.0 billion by 2031. The report provides a detailed outlook on regional and global markets, emerging trends, segment analysis, competitive landscape, and key market drivers. Click here to get a free sample of the report: https://www.stratviewresearch.com/Request-Sample/3932/semiconductor-vacuum-valve-market.html#form Key Report Highlights: • Market Size by 2031: US$ 1.0 billion • Growth Rate
Small Satellites Market Set to Reach US$ 7.7 Billion by 2030, Reports Stratview Research
Small Satellites Market Set to Reach US$ 7.7 Billion by 2030, Reports Stratview …
Stratview Research, a leading global market research firm, forecasts that the global Small Satellites market will grow at an annual rate of 2.2%, reaching US$ 7.7 billion by 2030. The report provides a detailed outlook on regional and global markets, emerging trends, segment analysis, competitive landscape, and key market drivers. Click here to get a free sample of the report: https://www.stratviewresearch.com/Request-Sample/1920/small-satellites-market.html#form Key Report Highlights: • Market Size by 2030: US$ 7.7 billion • Growth Rate (CAGR):
Hard Body Armor Market Set to Reach US$ 2,271.2 Million by 2031, Reports Stratview Research
Hard Body Armor Market Set to Reach US$ 2,271.2 Million by 2031, Reports Stratvi …
Stratview Research, a leading global market research firm, forecasts that the global Hard Body Armor market will grow at an annual rate of 3.2%, reaching US$ 2,271.2 million on by 2031. The report provides a detailed outlook on regional and global markets, emerging trends, segment analysis, competitive landscape, and key market drivers. Click here to get a free sample of the report: https://www.stratviewresearch.com/Request-Sample/3253/hard-body-armor-market.html#form Key Report Highlights: • Market Size by 2031: US$ 2,271.2 million • Growth
3D Printing Powder Market Set to Reach US$ 5.8 Billion by 2028, Reports Stratview Research
3D Printing Powder Market Set to Reach US$ 5.8 Billion by 2028, Reports Stratvie …
Stratview Research, a leading global market research firm, forecasts that the global 3D Printing Powder market will grow at an annual rate of 27.1%, reaching US$ 5.8 billion by 2028. The report provides a detailed outlook on regional and global markets, emerging trends, segment analysis, competitive landscape, and key market drivers. Click here to get a free sample of the report: https://www.stratviewresearch.com/Request-Sample/853/3d-printing-powder-market.html#form Key Report Highlights: • Market Size by 2028: US$ 5.8 billion • Growth Rate

All 5 Releases


More Releases for PMI

PMI Foam Market Size, Share | Analysis 2032
PMI Foam Market Overview The global PMI (Polymethacrylimide) foam market is a niche but growing segment within the advanced materials sector. PMI foam is widely used in high-performance applications due to its lightweight, high mechanical strength, and excellent thermal stability. It is particularly favored in industries such as aerospace, automotive, and wind energy for its superior properties in sandwich structures. With its strong resistance to heat and chemicals, PMI foam is
PMI Announces Dates for October 2010 Short Course
PMI is proud to announce the dates for the October 2010 Short Course. The fall course will be held during the week of October 11th - 15th, with classes on the 12th, 13th, & 14th. The Monday (11th) and Friday (15th) will be reserved for meeting with PMI representatives, testing customer samples, and tours. Registrations are now open for those who are interested in attending. Please
PMI Announces Dates for First 2010 Short Course
Porous Materials, Inc. (PMI) is happy to announce the dates for it's first Short Course for the new year. The course, titled "Pore Structure Characterization; Theory & Practice", will be held during the week of May 11-13, 2010. The PMI Short Course brings together our experts in pore structure and characterization, as well as technical specialists from industries, research laboratories and universities, for three days of intensive lectures, discussions, and hands-on
PMI Announces Dates for October 2009 Short Course
Porous Materials, Inc. (PMI) has announced its October Short Course, “Advanced Techniques for Pore Structure Characterization; Theory & Practice,” will be held during the week of October 19th, 2009. The course will run Tuesday the 20th through Thursday the 22nd, and will feature lectures, lecture notes, demonstrations, and guest speakers. Attendees will be given plenty of time for hands-on experience with the machines, and will be able to
New Cartridge Bubble Point Tester from PMI
PMI is proud to announce its newest instrument - the Cartridge Bubble Point Tester. This instrument brings a solution to many of the problems faced by industry personnel when testing their filter cartridge media. The versatility, ease of use, and safety aspects of this machine make it a valuable tool in the filtration media industry, and has been built with the end user in mind. Some of the
PMI Unveils new Fuel Cell Porometer
Ithaca, NY, February 2, 2009 -- The PMI Fuel Cell Porometer provides fully automated through-pore analysis including pore-throat diameter, pore size distribution, mean flow pore diameter, and liquid & gas permeability. The porometer’s versatility allows the user to simulate operating conditions. The instrument has special features to measure the effects of compressive stress on a sample, test temperature, sample orientation, layered structure on pore structure characteristics. User-friendly