Polycoat Announce New Products for Waterproofing

A New Urethane Mortar Trowel / Slurry System

Santa Fe Springs, CA – December 15, 2011- American Polymers Corporation (dba Polycoat Products), announces PC-CRETE®U (trowel and slurry) is a 3-part, heavy duty, 100% solids, aromatic, cementitious urethane mortar system typically applied atbetween 1/8” (3.17mm) and 3/8” (9.52mm) dry film thickness. It has a textured matte finish and can be used to form containment
beams, integral cove bases for seamless wall to floor protection or to slope floors in horizontal applications. PC-CRETE® U is custom formulated to provide a strong barrier against hydrostatic pressure and thermal shock while delivering a quick turnaround cure time. It is extremely receptive to decorative aggregate broadcast and acts as an aggressive barrier against chemicals, abrasive wear and heavy impact.
Waterproof Coatings

PC-CRETE® U has proven its protective strength in cold rooms, freezers and commercial kitchens and is especially well suited for tough, harsh environments that require application below 40°F,” stated Ashish Dhuldhoya, Senior Vice President, Polycoat Products, “It is the product we recommend to all of our flooring contractors who are looking for a cost-effective urethane mortar system solution that will limit operational downtime.”

PC-CRETE® U FEATURES:

Trowel or slurry applied
No blistering or chipping
Quick return-to-service (4-6 hrs.)
Can be applied below 40°F
Excellent thermal shock and impact resistance
Superior protection against hydrostatic pressure
Meets California VOC and SCAQMD requirements

TYPICAL FLOOR USES:

Cold Rooms/Freezers
Commercial Kitchens
Pharmaceutical
Food and Beverage
Manufacturing
Merocessing
Warehouse/Storage
Electronic Assembly

Industrial Coatings
About Polycoat Products Polycoat Products is a division of American Polymers, headquartered in Santa Fe Springs, CA. The company manufactures high performance, monolithic, protective polyurethanes, polyurea, and polyaspartic coatings for the construction and waterproofing industries. Its waterproofing product application specialties include Vehicular Parking Decks, Pedestrian Decks, Below Grade Membranes and Caulking Compounds with a special selection of elastomeric deck coatings with Class A and Class B fire ratings. Polycoat Products coatings can be applied by spray, roller, trowel, slurry, and brush for easy application. Polycoat Products brand names include: PC-Crete®, Polydeck®, Poly-I-Gard®, Polycoat-Aquaseal®, Poly-Aquatight®, Polyeuro®, Poly-Caulk®, and Polyfil®. For more information about Polycoat Products call 562-802-8834 or visit www.polycoatusa.com
Polycoat Products Contact
Bob Parsons,Marketing
bobparsons@polycoatusa.com

Polycoat Products, headquartered in Santa Fe Springs, California specializes in the manufacturing and custom formulating of high performance, monolithic, protective polyurethanes, polyurea, and polyaspartic coatings and linings for Waterproofing, Industrial Coatings/Spray Elastomers, Truckbed Liners, Cast Elastomers, Theming and Foam applications.

Polycoat Products
14722 Spring Avenue
Santa Fe Springs
CA, 90670-5108 (USA)
Tel: +1-562-802-8834
Fax: +1-562-921-7363

This release was published on openPR.