NUB Engineering: The retort No. 4

NUB Engineering: demolition and complete rebuilding of Brimac retort

Brimac Environmental have four retorts at their site in Greenock and import crushed bovine bones mainly from India for their process. The crushed bones are fed into the top of the retort where they are fired to 1000 degrees centigrade for between 12 to 24 hours. At the end of the firing process the product exits the bottom of the retort as a white powder, which is known as “Hydroxyapatite.” This product is then sold for fluid purification in the likes of sugar and water industries.
NUB Engineering were employed for the demolition and complete rebuilding of the Brimac No. 4 retort. Work started with the controlled demolition of the old retort being undertaken in November 2011 when NUBs employees removed 97 tonnes of refractory material from site.

Once demolition and removal of all the material was completed the skilled tradesmen and experienced labour cast a 6" concrete base in December which was then left to fully cure until 9th January 2012 when rebuilding of the retort itself commenced.

The new retort which is approximately 3m by 2.6m and 6m high and consists of a complex arrangement of bricks of multiple shapes and sizes for the first 72 of 84 courses. Because of the complexity the skilled NUB bricklayers worked to individual drawings for each course with the 12 top courses of brickwork being cast blocks.

The entire works were successfully completed on time and within budget by Mid February.
http://www.stds-nub.com/company.html

The union between N.U.B. Engineering and STDS-JANTZ has combined the skill and expertise gained by both companies over the last 30 years.


Working together to meet the needs of drilling contractors around the world the two companies have combined the most modern technology with a well-trusted, skilful workforce in order to design and manufacture all types of drilling tools.

By combining this technology with the traditional skills of the longstanding workforces N.U.B. Engineering and STDS-JANTZ are able to offer tools to meet the requirements of the most discerning contractors.

N.U.B. Engineering has been producing high quality drillng tools since its conception in 1980.

With over 30 years of highly skilled experience and a practice of modern design and construction techniques N.U.B. Engineering consistently strives to improve on its market position. This is achieved by supplying individual quality equipment that provides solutions to contractor’s requirements.

Continuous quality accreditations and certifications reflect the company’s commitment to continued improvements in quality.

www.nubeng.com

N.U.B. Engineering Limited
Block 15, Mosshall Road 

Newhouse Industrial Estate 
Motherwell, ML1 5RX 
Scotland 


Phone +44 (0) 16 98 - 83 38 73 

Fax: +44 (0) 16 98 - 73 43 22 

sales@nubeng.com
www.nubeng.com

This release was published on openPR.