Spyder4 Integrated in QUBYX PerfectLum Calibration and Verification Software
Nice, France, April 10, 2012 -- QUBYX Limited has announced that their DICOM calibration and quality assurance software PerfectLum 3.0, developed specifically for medical imaging industry, now supports the new enhanced model of Spyder, one of the most commercially successful colorimeters in the calibration market.
“We believe that the new Spyder4 in combination with PerfectLum software will provide a critical tool to the medical imaging industry,” says Marc Leppla, Director of QUBYX. “The enhanced fourth-generation Spyder with the new improved version 3.0 of PerfectLum will be able to calibrate any consumer display to the level of accuracy and quality our customers are expecting.”
Spyder4 is a patented, full-spectrum 7-color consumer sensor from DataColor, using edge detection to provide sensitive and accurate color response. The fourth-generation Spyder improvements include double-shielded filters, which, according to DataColor, are expected to provide more long-term stability and improve meter accuracy by 26% compared to the Spyder3.
PerfectLum software is designed to calibrate and verify the displays, utilized in medical imaging industry. PerfectLum is capable of performing DICOM, Gamma and CIE L calibrations, as well as acceptance and constancy tests for such medical industry standards as AAPM TG18, DIN 6868-57, JESRA X-0093 and IEC 62563-1.
The fourth-generation Spyder is an even more reliable and accurate calibration tool than its predecessor, but not less affordable. With PerfectLum supporting Spyder4, this consumer sensor can be utilized in professional medical imaging industry to run a full range of calibration and quality control operations, necessary to maintain the quality of diagnostic monitors. Enhancing the performance of any display, PerfectLum and Spyder4 will allow radiology practitioners to utilize cheaper consumer ones without having to compromise quality. The combination of PerfectLum 3.0 with quality commercial displays will enable hospitals to make substantial cost savings as compared to traditional medical displays.
QUBYX is a technology contributor to medical imaging and color management industries. QUBYX solutions include display management systems, color calibration and verification software for medical imaging and defence industries use. QUBYX software ensures that the quality of display image always conforms to the highest standards of any industry relying on professional monitors. QUBYX Software Technologies Limited is a privately owned company, based in Nice, France. For more information about QUBYX, visit www.qubyx.com. A trial version of PerfectLum software is available here www.perfectlum.com/downloads
Founded in 1970 with operational headquarters in Lawrenceville, NJ, USA, the company supplies more than 35 years in color management and color science technology. DataColor's line of digital imaging products has become the most recognizable and honored color calibration brand in the world. DataColor has created a whole portfolio of digital imaging innovations for graphic designers, creative professionals and professional photographers. A Swiss-held company, DataColor's strong worldwide presence encompasses global manufacturing and operational facilities with an international strategic network of sales and support offices. To read more about DataColor please visit www.datacolor.com
Media Contacts : For further details and interview, please contact : Mr. Marc Leppla, QUBYX Ltd., 80, rue Marechal Joffre, 06000 Nice, France, tel. +33 (0)4 97 03 23 00, fax +33 (0)955 880 096, firstname.lastname@example.org, www.qubyx.com
Founded in 1970 with operational headquarters in Lawrenceville, NJ, USA, the company supplies more than 35 years in color management and color science technology. DataColor's line of digital imaging products has become the most recognizable and honored color calibration brand in the world.
Mr. Marc Leppla
80, rue Marechal Joffre
06000 Nice, France
33 (0)4 97 03 23 00
This release was published on openPR.
Permanent link to this press release:
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Spyder4 Integrated in QUBYX PerfectLum Calibration and Verification Software here
News-ID: 217473 • Views: 3685
More Releases for PerfectLum
LG Radiology Displays Bundled with PerfectLum Software
FDA-approved LG displays work with Perfectlum software and include all necessary software and certifications to meet strict New York and New York City requirements. Wilmington,DE, June 4, 2020 -- QUBYX Medical Solution LLC today announced the immediate availability of advanced medical displays from LG Electronics, which are each bundled with Qubyx PerfectLum Medical Display Calibration and QA Software Suite that is perfectly suited for radiologist, chiropractors, urgent care facilities, hospitals, medical
FDA Approves Dell UP3216Q Monitor and PerfectLum for Diagnostic Use
Qubyx Software Technologies Inc., the U.S. software maker, announced that the U.S. Food and Drug Administration has issued 510(k) clearance for the Dell Ultrasharp UP3216Q monitor and PerfectLum, the company's calibration and quality assurance software for medical purposes. Wilmington, DE, USA, August 26, 2016 -- Qubyx Software Technologies Inc., the U.S. software maker, announced that the U.S. Food and Drug Administration has issued 510(k) clearance for the Dell Ultrasharp UP3216Q monitor
PerfectLum Software for Qualityassurance of Medical Displays
Nuremberg, July 3rd 2013 GOSSEN METRAWATT, manufacturer of test and measurement technology for use in medical instituts has integrated a Software for Qualitycontrol of Diagnostic Displays In Cooperation with QUBYX Ltd. the Software PerfectLum was adopted to work with the measurement devices from GOSSEn and to allow an automatic datatransfer of measured values. SECULIFE PerfectLum was developed for the use in medical imaging applications and includes a DICOM Calibration, Display-Profiling and
PerfectLum Software Added to SECULIFE Product Range
28/08/2013, Nuremberg, Germany - With the inclusion of PerfectLum software into the SECULIFE product range, Gossen-Metrawatt, a manufacturer of measurement and testing technology for medicine, integrates a powerful tool for quality assurance of displays in medical diagnostics. In cooperation with QUBYX, the manufacturer of PerfectLum software, it has been adapted to the meter Mavo-Spot made by Gossen and allows automatic data transfers. The SECULIFE PerfectLum was developed for medical imaging
UW Health Will Use PerfectLum Calibration and Quality Assurance Software
University of Wisconsin Hospital and Clinics has installed PerfectLum medical monitor calibration and quality assurance tool to perform calibrations and QA tests. Wilmington, DE, July 03, 2012 -- QUBYX PerfectLum medical display QA application, designed for DICOM and AAPM conformance of medical displays, will be applied in one more healthcare facility. The quality assurance capabilities of the medical monitor QA tool include acceptance and constancy testing according to the American Association
Spyder4 Integrated In QUBYX PerfectLum Calibration and Verification Software
QUBYX Limited has added new Spyder4 colorimeter support to DICOM calibration and QA software PerfectLum. 04/02/2012, Nice, France - QUBYX Limited has announced that their DICOM calibration and quality assurance software PerfectLum 3.0, developed specifically for medical imaging industry, now supports the new enhanced model of Spyder, one of the most commercially successful colorimeters in the calibration market. “We believe that the new Spyder4 in combination with PerfectLum software will provide a