Your contribution to the environment - Oil Mist Separators

Fortunately, nowadays there is no need to discuss the necessity of an Oil Mist Separator. The protection of equipment and employees, immense cost reductions due to lubrication oil savings and reduced maintenance are just some of the advantages of an Oil Mist Eliminator.

Perhaps you are familiar with the problems the operator of your rotary machine complains about: a smoke development that smells strangely like oil, dirty work halls and oil-contaminated equipment. All this can be traced back to one cause: Oil mist.

How is oil mist produced?

The bearings of a rotary machine are lubricated with oil to guarantee a smooth operation. Due to the high speed of the machine, a great amount of heat is generated, which causes the formation of the smallest oil particles, so-called oil mist. If the resulting oil mist is not efficiently extracted, it poses an increased safety and fire risk. Moreover, if the oil mist escapes unfiltered into the atmosphere, the environment suffers lasting and long-term damage from the polluted air.

Protection of your turbine and employees

Oil mist not only pollutes the environment, but can also cause serious damage to your equipment. A reliable turbine that works smoothly and performs its task better than expected - the dream of every power plant operator and machine builder. But what if the concentration of oil mist is too high causing impairment of the efficiency of your plant and malfunctions or even breakdowns?

Your contribution to environmental protection

For more than 30 years, we have been committed to the protection of our environment. That's why we have developed a filtration system that is applicable with current legal guidelines for keeping the air clean and protecting your machine - an Oil Mist Separator.

Oil Mist Separator - a clean circuit that saves money and protects the environment

Individually designed Oil Mist Eliminators from FRANKE-Filter offer this protection by sucking moisture and dirt particles out of the lubricant circuit and filtering them. The filtration efficiency of FF2 Oil Mist Eliminators is at 99.9% at a particle size of 0.1 µm thanks to microfiber filter elements. Due to the special filtration process, all additives are retained and the filtered oil can be added back to the circuit eventually. A clean cycle that saves money in the long run and protects the environment sustainably.

Please do not hesitate and contact us for a non-binding consultation or pass on our contact details to the operators of your machines.

For more information: https://franke-filter.com/en/oil-mist-separators-from-franke-filter/

We look forward to your message.

FRANKE-Filter GmbH
Ms. Celiena Schober
Wiedhof 9
31162 Bad Salzdetfurth
Germany

FRANKE-Filter is a worldwide leading German industrial company specialized in the development, design and manufacture of oil mist filtration systems. Due to over 30 years of market experience, FRANKE-Filter is able to offer high quality solutions, individually tailored to each application. The company is located in Bad Salzdetfurth (Lower Saxony) and is connected with countless partners worldwide to satisfy all customer needs globally.

This release was published on openPR.