Fiberglass Mold Market is Growing in Huge Demand from 2020 to 2026 | Dencam Composites, Gurit Holding AG, Janicki Industries and more

The global fiberglass mold market is forecast to reach USD 530.2 Million by 2026, according to a new report by Reports and Data. The growing demand for renewable energy sources is one of the significant factors contributing to the growth of the market. Fiberglass is stronger and has a high resistance to corrosion. The materials are ideal for products used outside, in states near the ocean, with a high salt content in the air. Fire-retardant resins make products withstand fire. There are very few limitations with molding fiberglass, providing unlimited possibilities for manufacturers. This makes it possible to design visually appealing ones that are still as structurally strong and durable.

To look at the PDF Sample Report and get 30 minutes of a free consultation @ https://www.reportsanddata.com/sample-enquiry-form/2057

The Asia Pacific region held the largest market share of ~29% in the year 2018 and is anticipated to witness the highest CAGR of 9.4% during the forecast period. The rapid growth in the demand for fiberglass mold will contribute to the growth of the market in the region. The rising population, growing industrialization, and urbanization, coupled with the expanding chemicals & materials, construction, automotive, and other industries in the region will also escalate the growth of the market.

Companies considered and profiled in this market study
Dencam Composites, Gurit Holding AG, Janicki Industries, Norco Composites & GRP, SCHÜTZ GmbH & Co. KGaA, TPI Composites, Shandong Shaungyi Technology, Indutch Composites Technology, EUROS GmbH, and Molded Fiber Glass Companies, among others.

The companies have adopted various strategies, including mergers, acquisitions, and partnerships to hold ongoing trails and come up with new developments in the market.

Further key findings from the report suggest

1. By composite phases, the market can be classified into matrix and dispersed phase. Fiber-reinforced composites usually consist of a continuous phase. This continuous phase is also known as the matrix, and the material that is distributed through the matrix is known as the dispersed phase. The dispersed phase, also called a reinforcement, is added for other purposes, such as, to bulk up the matrix at low cost without affecting the properties of the composite. There may also be a phase to create a bond between layers and phases, sometimes called the interface.

2. Among the product types, the epoxy resins accounted for the largest market share of ~36% in the year 2018. The main characteristics of epoxy resin after curing are voltage resistance, water absorption, strength, heat & temperature resistance, chemical resistance, elongation, shrinkage coefficient, thermal conductivity, induced rate, and others.

3. The vinyl ester is forecasted to witness the highest CAGR of 9.5% during the forecast period. Vinyl esters are more tolerant of stretching than polyesters. This makes them able to absorb impact, reducing the damage caused, and are less likely to show stress cracking. Vinyl esters shrink less on curing, which means that the 'pre-release' of a laminate from a mold is less significant.

Connect with an expert for customization of This Report @ https://www.reportsanddata.com/request-customization-form/2057

For this report, Reports and Data have segmented into the global fiberglass mold market on the basis of resin type, composite phases, industry vertical, and region:
Resin Type Outlook (Volume, Kilo Tons and Revenue, USD Million; 2016-2026)
Polyester
Vinyl Ester
Epoxy
Others

Composite Phases Outlook (Volume, Kilo Tons and Revenue, USD Million; 2016-2026)
Matrix
Dispersed Phase
Interface

Industry Vertical Outlook (Volume, Kilo Tons and Revenue, USD Million; 2016-2026)
Building & Construction
Automotive & Transportation
Wind energy
Aerospace & Defense
Marine
Others

Regional Outlook (Volume, Kilo Tons and Revenue, USD Million; 2016-2026)
North America
Europe
Asia Pacific
MEA
Latin America

Access the Entire Report packed with TOC, Tables and Figures and Outline of Prominent Companies @ https://www.reportsanddata.com/report-detail/fiberglass-mold-market

Contact Us

John Watson
Head of Business Development
Address- 40 Wall St. 28th floor New York City, USA
Direct Line: +1-212-710-1370
E-mail: sales@reportsanddata.com

About us

Reports and Data is a market research and consulting company that provides syndicated research reports, customized research reports, and consulting services. Our solutions purely focus on your purpose to locate, target and analyze consumer behavior shifts across demographics, across industries and help clients make a smarter business decision. We offer market intelligence studies ensuring relevant and fact-based research across a multiple industries including Healthcare, Technology, Chemicals, Power, and Energy. We consistently update our research offerings to ensure our clients are aware about the latest trends existent in the market. Reports and Data has a strong base of experienced analysts from varied areas of expertise.

This release was published on openPR.