openPR Logo
Press release

Communicative Coffee Grinders

10-07-2011 09:36 AM CET | Fashion, Lifestyle, Trends

Press release from: MAHLKÖNIG

/ PR Agency: KaffeeSATZ PR

Technical innovations on the subject of coffee grinding are the theme of MAHLKÖNIG GmbH & Co KG at the host in Milan from 21 - 25 October.

At this year’s host, the world’s largest trade fair for coffee and coffee technology, MAHLKÖNIG is presenting new and further developments for its popular gastronomy grinder K30 and the semi-professional models VARIO home and ProM.

Intelligent Communication. The RFID version (RFID= Radio Frequency Identification) of the popular K30 espresso grinder has been developed for the specific requirements of specialty coffee roasters and, above all, coffee bars. This technology enables a data exchange between the beans` reservoir and the grinder, meaning that control and recording functions are possible way above the counting and logging of portions ground per day. Via a quantity indicator it is possible to measure the remaining capacity and the portions that are possible. A signal warns in good time if the coffee supply is running low. These are only a few of the functions that are possible in this unique unified information system. In addition, there is also a new RFID version which functions via a smart card and is interesting, above all, for roasters who fund an espresso machine for their clients. With the RFID smart card you can ensure that the grinder genuinely only grinds the amount of coffee delivered and is blocked for additional “external grinding”. The smart card is loaded with a pre-defined grinding length (in seconds) – similar to a pay card – and is delivered to the client by the coffee roaster along with the coffee. The appliance is activated with the loaded-up smart card by holding the card against the transmitter or the grinder’s antenna. The credit balance is loaded from the card onto the grinder and the grinder is unlocked to grind, for example, 1 kg of coffee.
After the pre-defined grinding time required for 1 kg of coffee beans, for example, the grinder is blocked and only grinds again if it is activated with a new smart card.

Specialists. MAHLKÖNIG is also keeping up with the growing trend of filter coffee preparation in the gastronomy industry with a further version of the popular VARIO home. With this we don’t mean the classical filter machine methods, but the elaborate and professional filter coffee preparation using a French Press, aero-press or “Karlsbader Kanne” in so-called "brew bars". The new VARIO-W is designed exclusively for grinding filter coffee and therefore does not grind for a pre-defined time but according to weight. Highly sensitive scales which measure the coffee powder to the exact gram are fixed under the ground coffee container. This means that the amount of coffee, which is ground, can always be reproduced exactly. The grinding degree can be set infinitely variably and very finely via two slide controls.
The new ProM Espresso, a further development of the ProM all-round grinder, represents the antithesis of filter coffee grinding. It has a large hopper which takes at least 600g espresso beans. For easy dosage of double or single shots, the new display has been provided with a touch screen. To use more than one variety of espresso, the hopper can be closed by using the hopper slide and replaced. There is a video in English describing how RFID Technology functions, as well as the ProM Espresso and VARIO-W at http://vimeo.com/25808154

You find MAHLKÖNIG at booth N 70/P 69 in Hall 11 at host

MAHLKÖNIG has been the leading brand worldwide in the field of quality grinders for professional users for over 80 years. The name MAHLKÖNIG is a byword for quality supremacy and innovation. According to our philosophy, our products are developed by our own employees and manufactured by hand according to individual client requests. MAHLKÖNIG is equipped with an international network of its own branches as well as over 150 contract dealers and service partners to care for the over 400,000 MAHLKÖNIG grinders in use worldwide. In this way, the knowledge of MAHLKÖNIG is used on a daily basis throughout the world.
MAHLKÖNIG is the official grinder sponsor 2009-2011 of the Barista World Championships WBC.

KaffeeSATZ PR
Sabine Jürgenmeier
Obere Stahlindustrie 4
44793 Bochum
Germany
sj@kaffeesatz-pr.de
www.kaffeesatz-pr.de

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Communicative Coffee Grinders here

News-ID: 195064 • Views: 2543

More Releases from MAHLKÖNIG

Champions rely on MAHLKÖNIG
The new Barista World Champion 2013 has just been crowned: Pete Licata from the United States. The beans for his winning coffee creation were ground by a MAHLKÖNIG K30 TWIN. Tension filled the air for three days in Australia's metropolis Melbourne, where this year's World Barista Championships were held. A total of 51 national Barista Champions had come together to find the very best among them. During the two days of
MAHLKÖNIG supports the Cup of Excellence Program 2012
Hamburg-based grinder manufacturer is the exclusive provider of coffee grinders for the “Cup of Excellence”, the most prestigious award for quality coffee. Hamburg, February 1st, 2012 | Promoting the quality of coffee both at national and international level has been a high priority for MAHLKÖNIG for many years. This year, the grinder manufacturer is also supporting the world’s most important competition for quality coffee in the producing countries, the “Cup of
Limited Special Edition of MAHLKÖNIG K30 Grinder for the WBC in Bogotá
The third year in a row MAHLKÖNIG supports the World Barista Championship as official grinder sponsor. As the World Barista Championship takes place in Columbia this year, for the first time ever a coffee producing country acts as host of this competition. MAHLKÖNIG backs up the WBC 2011 in Bogotá as official grinder sponsor. From June 2nd – 5th the best baristas are going to meet in the Colombian capital of Bogotá,
US-Barista Champions rely on MAHLKÖNIG grinders
From April 27th until May 1st 2011 America`s best baristas will compete again during the US Barista Championship in Houston (Texas). MAHLKÖNIG USA supports this top-class contest again this year as official grinder sponsor. The US Barista Championship takes place at the “23rd SCAA Exposition and Symposium” in the George R. Brown Convention Center in Houston. 38 regional champions who have qualified during the preliminaries in six different US-regions will then

All 5 Releases


More Releases for RFID

rfid clear tag for rfid inventory (gyrfidstore)
RFID Disc Tags are widely used for inventory tracking system or Automatic production systems. The RFID Disc Tag can also work on metal surface with anti-metal layer on it, also can be attached to goods surface by adhesive layer. There are abundant size options from 12mm to 50mm. GYRFID presents several types with different material and size to suitable customer’s application. DIP Series- PVC Disc Tag, PVC Laminated, thickness of 1.0-1.2mm DIT
windshield rfid tag for rfid solutions(gyrfidstore)
The strength of RFID label or RFID Stickers compared with other tags is the thinner thickness, various size, flexible and cost efficient. It can be sealed inside of goods or stick on the device surface with adhesive layer. The label is also optional with anti-metal layer to mount and working on metal surface. GYRFID Provides different types Stickers to meet the requirement for different applications such as NFC Payments,
RFID Bracelet
RFID Bracelet 1.Housing ABS,Soft PVC 2.Chip:MiFare 1k,MiFare 4k,MiFare Ultralight 3.RFID Bracelet:ISO9001 4.15 years OEM RFID Bracelet: Waterproof silicone 125 KHz and 13.56 MHz Passive RFID bracelet. Perfect for short to medium range (Up to 60 cm) RFID applications such as around pools, waterparks, spas and other RFID access control applications where a waterproof bracelet is required. 1. Acid-proof 2. Alkali-proof 3. Constancy of properties over a wide temperature range leading to large operationg range 4.Excellent
RFID tags
RFID tag,rfid keyfob,rfid disc tag IC:EM4102,T5567,MF 1K,UHF Frequency:125KHZ,13.56MHZ,868MHZ Craft:logo printing,encoding RFID tag Frequency LF(Low Frequency): 125KHz HF(High Frequency): 13.56MHz RFID IC LF: Unique EM4100/4102, GK4001 HF: Mifare 1K,Mifare 4K, Mifare Ultralight, Mifare desfire I CODE SLI UHF Material PVC,ABS,Nylon Additional Craft
RFID keychain(EM4102)
RFID keychain with different chip embedded,with logo and number printing RFID keyfob is a transponder consisting of a chip and a coil-antenna in the robust ABS material. It has a hole for a key ring or chain. The key fobs is popularly for access control, time recording, operations (for example: cashless payment) and for the general identification for people. Key fobs are a good option to contactless cards. What we
RFID Wristband Tag
RFID Wristband, Mifare 1K RFID Wristband Tag with outstanding quality & excellent performance now is available at competitve Listing Description RFID bracelet,different colours and IC,EM4102,MF 1K,etc Detailed Description Reading distance:80mm Operating temperature -40 to 70 degree celsius Strong temperature -40 to 80 degree celsius Materials:ABS+PVC water-resistant:YES GK4001(125KHz 64 bits, R/O) EM4102(125KHz 64 bits, R/O) I CODE(13.56MHz 1024 bits,R/W) Mifare 1K(13.56MHz 1K byts,R/W) Hitag